West Sussex · England
New Build Mastic in Pulborough
Plot mastic for developers and snagging failed sealant in new homes for householders, landlords and businesses in Pulborough. Fully insured, ARBOMaster approved and guaranteed for a year.
- Kitchen sealant that has pulled off the wall
- Cracks appearing as a new home settles
- Untidy sealant flagged on a snagging list
How the visit works
At the end, we look at the finished work together and tell you how long to leave it. The visit itself normally takes anything from a few hours to several days, depending on the number of plots, depending on the size of the job. A visit to Pulborough is planned like any other: the time, the access and where to park are agreed in advance. If the work is outside, the weather plays a part, as sealant needs a dry surface.
- First, the list of joints is agreed from your snagging sheet or plot schedule.
- The failed sealant is removed completely.
- Joints are vacuumed and cleaned of building dust.
- We prime where needed and apply a sealant suited to each joint.
- We tool every joint neatly and tell you when each area can be used.
Preparing for the visit
- Let us know about stairs, lifts or work at height
- On commercial sites, let us know about site rules
- Let us know if you’ve seen damp or leaks
How to get a quote
For new build mastic in Pulborough, call 0345 464 0079 or send us an email. A short description of the job and where it is helps us quote, and we will agree the price before any work begins.
Related advice
How we handle new build mastic in Pulborough
Building dust is behind a lot of failed new-build sealant. We clean every joint thoroughly and prime where the surface and product need it, so the new bead bonds properly. We work on plot handovers, kitchens and windows & doors, and people most often call us about sealant work across a run of new homes and messy sealant that spoils new finishes.
In smaller places like Pulborough, new homes tend to come as small developments or single plots. Each still needs its sealant and floor joints finished properly from day one.
There’s a 12-month guarantee on every job, whatever its size.
- Place
- Pulborough (RH20)
- Wider area
- West Sussex
- Cover
- A year, on every job
- Quotes
- Quoted before any work starts
- Telephone
- 0345 464 0079
- Page updated
- 26 October 2026
Pulborough questions
Will you come out to Pulborough?
Yes. Pulborough is within the area we cover, which takes in towns, villages and rural addresses. Our work covers London and the South East. Just mention lanes, gates or anything else about the route when you book.
Do you cover Pulborough for new build mastic?
Yes, Pulborough is within the area we cover. Our work covers London and the South East. You can call 0345 464 0079 or email us and let us know what needs doing.
What should I tell you?
Only a few details: the address or postcode, what’s wrong and any access issues. After that, simply ring 0345 464 0079 or email us.
Do you work for letting agents?
Yes, we do. Domestic, commercial and hotel work are all part of what we do.
Do I have to be there?
For indoor joints, yes, someone needs to let us in. Once we have agreed the job, you don’t need to watch us work.
Will you just run a new bead over the existing one?
No. The old sealant is cut out fully, then clean and prime the joint, and a new bead applied.
Should I try DIY first?
You can, for simple jobs. The key is preparation: remove all the old material and work on a clean, dry joint. If it doesn’t work out, we can redo it.
Do you hold any approvals?
Yes. We are ARBOMaster approved, the scheme for applicators of Arbo sealants.
DIY versus a professional finish
A careful DIYer can reseal a simple joint, like a short, easy-to-reach joint indoors. Where it goes wrong is sealing over the old bead, working on a wet joint or overloading the gap.
A DIY attempt does not rule out a professional job. We cut it out and start again.
What we cannot put right
Sealant isn’t the answer to every problem, and we’d rather say so up front. It will not solve:
- Damaged fittings that need replacing
- Disputes or warranty claims with your builder
- Leaking fittings rather than failed sealant
If in doubt, ring 0345 464 0079 or drop us an email and we’ll say what we think before booking.
Joints and surfaces we work on
- Skirting & floors
- Bathrooms & en suites
- Plot handovers
- Show homes
- Kitchens
- Windows & doors
What we’re called out for in Pulborough
New homes are full of moisture from plaster, screed and concrete, which takes a year or two to dry out. As it does, timber shrinks and joints open.
Any of these means the joints need attention:
- Beads laid onto grit and dust from the build
- Sealant work across a run of new homes
- Gaps behind new kitchen upstands
- Untidy sealant flagged on a snagging list
If you’ve bought a new home near Pulborough station, the sealant around baths, showers and frames is worth checking in the first year or two.
What your quote should include
- How long to leave it before use
- What preparation is included
- Who turns up on the day
- Whether all the old sealant comes out first
What affects the cost of new build mastic
For a quick quote, just ask. What matters most is:
- Whether the work is at height
- How many areas need sealing
- The number and length of the joints
- When we can work, for business premises
A failed joint rarely gets cheaper to fix by waiting. If you are unsure, phone 0345 464 0079 or send us an email for an honest opinion and a quote.
What we need to know
The more you tell us, the more accurate the quote. When you ask for a quote, tell us:
- The type of property
- How we’d reach the joints
- Where the property is
- Pictures of the joints, sent by email
Need a quote? Please call 0345 464 0079 or drop us an email and tell us about the job. You will know what we plan to do, and what it will cost, before any work begins.
Places near Pulborough
Other services in Pulborough
Work for landlords, hotels and businesses
If you manage several properties in or around Pulborough, jobs at different addresses can go on one quote. Just tell us the addresses and what each one needs, and pictures by email help.
Whether it’s one flat or a portfolio, you get the same standard of work: old sealant fully removed, joints prepared properly and a 12-month guarantee.
What new build mastic looks like in Pulborough
Rainfall in the South East is lower than in much of the UK, yet outdoor joints still have to be sealed dry, so jobs are booked with the weather in mind.
Around Pulborough, as everywhere, new build mastic is only as good as the preparation behind it.
Pulborough is about 10 miles north of Littlehampton, in West Sussex. Whether you’re in the middle of Pulborough or further out, we cover new build mastic for every kind of property, from flats and houses to offices and hotels. Pulborough is one of 371 towns and villages in West Sussex we cover. You can also see our page for Crawley, roughly 17 miles from Pulborough.
Postcode districts we cover here for new build mastic: RH20. If you need new build mastic at a property on London Road, Station Road and Rectory Close or anywhere close by, we can help. Pulborough sits on or near the A283, which makes travel easy. Close by, we work in Hardham (1 mile south-west), Pickhurst (1 mile north-west), Coldwaltham (2 miles south-west), Fittleworth (3 miles west) and Bedham (3 miles west). Larger places within reach include Horsham (11 miles north-east), Worthing (10 miles south-east), Bognor Regis (14 miles south-west), Chichester (15 miles south-west), Littlehampton (10 miles south) and Shoreham-by-Sea (13 miles south-east).
What’s near Pulborough
Around Pulborough, our work takes us to homes and buildings near The Oddfellows Arms, among other places. The nearest railway station is Pulborough station, about 0.6 miles west of the centre. Other landmarks nearby include The Storrington And District Museum (3.8 miles south-east) and Coates Castle (3.8 miles west). Open spaces near Pulborough include Amberley Wildbrooks RSPB Reserve.
Surface by surface
Show homes
Show homes need sealant that looks right from day one. We lay neat, even beads in colours to suit the finishes.
Windows and doors
The gap between a new frame and its plaster reveal often opens up. We remove cracked sealant and apply a flexible one.