West Sussex · England

Pulborough Remedial Sealant

Removing failed, mouldy or leaking sealant and putting it right for homeowners, landlords and businesses in Pulborough. Fully insured, ARBOMaster approved and guaranteed for a year.

  • Mould trapped under a layer of silicone
  • Sealant peeling off a dusty or damp surface
  • A second bead peeling off the first

Need remedial sealant in Pulborough?

Remedial sealant in Pulborough

A joint that keeps failing normally has a reason. A tray that moves, a worktop that is not fixed, the wrong sealant or water getting in elsewhere will beat any new bead. We look for the cause before we reseal. If you have floor or wall movement joints that have failed and black mould underneath the bead, we can help, whatever the surface.

Around Pulborough, you will mostly find houses and bungalows, some older and some much newer. Sealant and grout wear out here just as they do in a big town.

There’s a 12-month guarantee on every job, large or small.

Location
Pulborough (RH20)
Wider area
West Sussex
Guarantee
12 months on all our work
Quote
A clear quote up front
Phone
0345 464 0079
Last updated
26 October 2026
Close-up of hands using a sealant gun on the joint between a glass shower screen and tiles

Honest limits

To be straight with you, there are a few things sealant won’t fix:

  • A bath, tray or worktop that moves until it’s properly fixed
  • Tiles that have come away from the wall
  • Old mastic in a building from before 2000 that should be checked for asbestos before it’s disturbed

If you’re not sure, just phone 0345 464 0079 or email us and we will give you a straight answer before you book.

Surfaces we seal

  • Failed movement joints
  • Botched or over-sealed joints
  • Mouldy bath & shower sealant
  • Leaking tray & enclosure joints
  • Expansion joints
  • Shrunken worktop sealant

What we are called out for in Pulborough

One of the commonest remedial jobs is sealant on top of sealant. New silicone can’t stick to the old bead, so the top layer lifts and water and mould collect between the two.

Any of these means the joints need attention:

  • Sealant that came away because the surface wasn’t prepared
  • Floor or wall movement joints that have failed
  • Dark patches showing through the sealant
  • Wide, uneven beads that look worse than the old ones

Homes close to The Parish Church of St Mary include some older properties, and walls and floors in older homes can move, and sealant and grout show it first.

What your quote should include

  • Which sealant they’ll use, and why
  • How long to leave it before use
  • Is VAT in the price?
  • What happens if the job turns out different

Our hiring checklist

How it works

When we arrive, we look over the joints with you first, so you know exactly what we are doing. Surfaces next to the work are protected before any work starts. The work usually takes a few hours for a typical bath or shower, longer where several layers have been applied. In a smaller place like Pulborough, parking is seldom the issue; lanes, gates and long drives are worth mentioning. If the job is outside, tell us about side access and how high the joints are.

  1. First we find out how and where the joint has failed.
  2. All the old sealant comes out, including any layers underneath.
  3. We clean the joint, treat any mould and let it dry.
  4. Moving joints get backing and a flexible sealant to suit.
  5. We tool the joint and tell you about anything else that needs attention.

Preparing for the visit

  • Mention any sign-in or site rules at work premises
  • Let us know about parking restrictions
  • Tell us about any previous sealing or DIY attempts

How to get a quote

Every job is quoted individually, so start by telling us what you need. Simply ring 0345 464 0079 or drop us an email and describe the job, and pictures are welcome.

Get a quick quote

Read more

Why act early in Pulborough

Leaks that are left keep doing damage out of sight: soaked floorboards, ceiling stains below and blown plaster. By comparison, sorting the joint is quick. In an older home around Pulborough, damp from a failed joint can get into timber and plaster, which is far harder to put right than the sealant itself.

Every job is a little different, so each one gets its own quote. Size, access and the product the joint needs all play a part.

Why choose Mr Mastic in Pulborough

  • We’re fully insured
  • Anti-fungal silicone where joints get wet
  • Any old sealant cut out fully, not covered over
  • 12-month guarantee on every job

See our cost guide or what customers say.

Aftercare tips

Good habits help new joints last longer. A few tips:

  • Keep movement joints clear of mortar and paint
  • Always have old sealant cut out, not covered
  • Keep bleach and abrasives off the bead
  • Report a tray that rocks or a worktop that lifts

If we’ve found a cause, such as a loose tray or a leaking waste, get it fixed, because the new sealant cannot hold back a problem underneath.

If a joint has failed more than once, stop resealing it. Have someone find out why, or the next bead will go the same way.

Surface by surface

Worktops & kitchens

Kitchen joints often have grease and cleaning residue deep in them, so cleaning takes longer than in a bathroom before resealing.

Movement & expansion joints

A movement joint must be able to stretch. We remove the failed sealant, fit backing and reseal with a low-modulus product.

Landlords, agents and businesses in Pulborough

For anyone letting property in or around Pulborough, jobs at different addresses can go on one quote. Send us the addresses and the work at each.

We work for letting agents and landlords as well as householders. Sealant work between tenants is a simple way to keep a property in good order before the next move-in.

Pulborough homes and their sealant

Hard water is the norm across most of the South East, which leaves limescale on sealant, grout and fittings, and it has to be cleaned off before new sealant goes in.

Schools such as St Mary's Church of England Primary School are buildings too, and we reseal washrooms and kitchens in schools and businesses as well as homes. Letting a property close to Pulborough station? Then a joint that keeps failing is best fixed properly while the property is empty.

Pulborough is about 10 miles north of Littlehampton, in West Sussex. Every kind of property in Pulborough can book us for remedial sealant, old or new, large or small. Every job comes with our 12-month guarantee. Pulborough is one of 371 towns and villages in West Sussex we cover. We also work in Crawley, about 17 miles from Pulborough.

Here we cover the RH20 postcode area for remedial sealant. That includes homes and businesses on London Road, Station Road and Rectory Close. You will find Pulborough on the A283, so it’s easy for us to get to. Other places close to Pulborough include Hardham (1 mile south-west), Pickhurst (1 mile north-west), Coldwaltham (2 miles south-west), Fittleworth (3 miles west) and Bedham (3 miles west). Larger places within reach include Horsham (11 miles north-east), Worthing (10 miles south-east), Bognor Regis (14 miles south-west), Chichester (15 miles south-west), Littlehampton (10 miles south) and Shoreham-by-Sea (13 miles south-east).

Local landmarks in Pulborough

In Pulborough, that means homes and buildings near The Oddfellows Arms. Pulborough’s nearest station is Pulborough station, roughly 0.6 miles west. Nearby you will also find The Storrington And District Museum (3.8 miles south-east) and Coates Castle (3.8 miles west). For a walk, there’s Amberley Wildbrooks RSPB Reserve.

Map of Pulborough © OpenStreetMap contributors

FAQs for Pulborough

Can you do remedial sealant in Pulborough?

Yes, Pulborough is within the area we cover. Our work covers London and the South East. Just call 0345 464 0079 or drop us an email with a few details of the job, and we’ll send you a clear quote.

Do you cover smaller places like Pulborough?

Yes, smaller places are covered as well as towns. Our work covers London and the South East. Just mention lanes, gates or anything else about the route when you book.

How long should I leave it?

It depends on the product and the temperature. Before we leave, we’ll tell you the cure time.

Do you work for hotels and businesses?

Yes. We’ve worked for hotels, offices and other businesses, and we are fully insured.

Does someone need to be in?

It depends on the job. For work indoors, someone needs to let us in, while outside work can sometimes be arranged differently.

Will there be a smell?

Sometimes, a little. It fades as the sealant cures, and ventilation helps.

What does remedial sealant cost?

Every job is different, so each one gets its own quote. To get one, ring 0345 464 0079 or send us an email and let us know what needs doing and where.

What do you put in the joint?

The product depends on the job: anti-fungal sanitary silicone in wet areas, and other sealants where joints move or face the weather. Brands we use include Arbo and Everbuild.

20+ yearsMastic and sealant specialists
ARBOMaster approvedApproved applicator for Arbo sealants
Fully insuredDomestic, commercial and hotels
One-year guaranteeOn every job