West Sussex · England
Fire Rated Sealant in Fittleworth
Fire rated sealant for Fittleworth and the surrounding area: the right sealant, proper preparation and a neat finish. Ask us for a quick quote.
- Sealant items on a fire risk assessment action list
- Seals cut through by electricians, plumbers or data installers
- Standard silicone or caulk in a fire-stopping gap
Fire rated sealant in Fittleworth, done properly
In flats, HMOs, offices and schools, fire stopping is often disturbed by later work. One new cable or pipe can leave a gap that nobody goes back to seal. Those are the gaps we close, using a tested fire-rated product. We work on flats & HMOs, pipe & cable gaps and plasterboard & masonry, and people most often call us about old fire sealant that has split or come away and open holes round services passing through fire walls.
For holiday lets, converted business premises or a community building near Fittleworth, washroom and kitchen sealant and any fire-rated joints need the same attention as anywhere.
You’re covered for a year from the day we finish. If anything is not right with it, phone 0345 464 0079 or email us.
- Location
- Fittleworth (RH20)
- Wider area
- West Sussex
- Guarantee
- A year, on every job
- Price
- A clear quote up front
- Phone
- 0345 464 0079
- Updated
- 26 October 2026

Why it’s worth doing now in Fittleworth
Items left open on a fire risk assessment tend to come back at the next review. Getting them done and written up gives you evidence that the item was dealt with. Older cottages and farmhouses around Fittleworth can have timber floors and frames, and water through a failed joint can rot timber if it’s left.
Rather than a set price list, we look at what your job involves: how many joints, what’s in them now and how we reach them. The price is agreed before we begin.
Why us?
- Approved under the ARBOMaster scheme
- Experience in homes, commercial sites and hotels
- Arbo and Everbuild products
- Full insurance on every job
Take a look at our cost guide or customer reviews.
Commercial buildings in Fittleworth
In England, the Regulatory Reform (Fire Safety) Order 2005 requires a fire risk assessment for workplaces and for the common parts of blocks of flats, which is often where open fire-stopping gaps are first noticed. We apply fire-rated sealant to the assessor’s or designer’s specification and the product’s tested details.
If you let a flat or house near Pulborough station, new cables or pipes through a fire-resisting wall leave a gap that needs the right sealant. If you look after a building such as Fittleworth CofE Village School, fire-stopping around service openings should be restored whenever new services go in. For buildings such as The Parish Church of St Mary, service openings in its walls need the right fire-rated sealant, as in any building.
Fittleworth is about 11 miles north of Littlehampton, in West Sussex. Every kind of property in Fittleworth can book us for fire rated sealant, old or new, large or small. The work is guaranteed for a year. Our West Sussex coverage runs to 371 places, Fittleworth among them. There’s also a page for Crawley, about 19 miles away.
Jobs for fire rated sealant in RH20 is quoted and booked the same way as anywhere else. Streets in the area include Fairmead Close, School Lane and Greatpin Croft, all of which we cover. Nearby, we also carry out fire rated sealant in Bedham (1 mile north), Lower Horncroft (1 mile south), Coates (1 mile south-west), Hardham (2 miles south-east) and Coldwaltham (2 miles south-east). Further out, we also cover Horsham (13 miles north-east), Worthing (12 miles south-east), Bognor Regis (13 miles south-west), Chichester (13 miles south-west), Littlehampton (11 miles south) and Shoreham-by-Sea (15 miles south-east).
Local landmarks in Fittleworth
Around Fittleworth, our work takes us to homes and buildings near The Swan Hotel. The closest station to Fittleworth is Pulborough station, about 1.9 miles east. A little further out are Coates Castle (1.5 miles south-west) and Coultershaw Heritage Site (2.5 miles west). Open spaces near Fittleworth include Bignor Hill and The Mens.
Towns and villages near Fittleworth
More services for Fittleworth
Aftercare tips
So the new joints stay in good condition:
- Photograph sealed gaps before they’re covered up
- Store the list of sealed gaps with your building paperwork
- Allow for resealing whenever new services are run
- Include hidden areas like risers in routine checks
File the record of locations and products with your fire safety paperwork. It helps whoever checks the building next.
Small gaps around services are simple to deal with while there are only a few. Leave them and each new job adds another hole and the list grows.
How the job changes by surface
Door frames
Frame gaps are normally hidden behind the architrave. Where it’s open, we seal it to the product’s details for that gap size.
Plasterboard walls
Plasterboard partitions are common in flats, offices and conversions. We use a product tested in that kind of wall for the gap we are sealing.
Work for landlords, hotels and businesses
For anyone letting property in or around Fittleworth, several properties can go on one quote. Send us the addresses and the work at each, and photos by email help.
Businesses can book us for washrooms, kitchens, offices and more. For commercial premises, we can talk through working times when we quote.
Common questions in Fittleworth
Can you help a landlord with a rental near Pulborough station?
Yes, landlords and agents are among the people we work for, and several properties can go on one quote. You can phone 0345 464 0079 or email us with the details for a clear quote.
Is Fittleworth in your area for fire rated sealant?
Yes, Fittleworth is within the area we cover. We work across London and the South East. Just ring 0345 464 0079 or email us with a few details of the job, and we’ll give you a clear price.
Do you guarantee your work?
Yes, for a year. If anything is not right with the work within the year, let us know and we will sort it.
Are you fully insured?
Yes, we are fully insured for every job we do.
Is intumescent sealant the same as fire-rated sealant?
An intumescent material expands when it’s heated. Intumescent sealants are a type of fire-rated sealant.
Do I have to be there?
It depends on the job. For work indoors, someone needs to let us in, while outside work can sometimes be arranged differently.
Where are you based?
We work from Crawley. Our applicators cover Fittleworth, along with the rest of our area.
Can you quote for more than one area?
Of course. Combining jobs makes good use of the visit.
What sealant work cannot fix
In fairness, some problems need a different trade:
- Issuing a fire rating or certificate for a building
- Openings too large for sealant, which need batts, boards or another system
- Problems with the door itself rather than the gap around the frame
If in doubt, ring 0345 464 0079 or send us an email and we’ll say what we think.
Surfaces we seal
- Pipe & cable gaps
- Door frames
- Service penetrations
- Flats & HMOs
- Linear gaps
- Plasterboard & masonry
DIY versus a professional finish
If you’ve already had a go yourself, that is fine. We cut it out and start again, so tell us about it when you ask for a quote.
What a professional job adds is preparation and the right product. Joints are cleaned back to sound surfaces and dried, and the sealant is matched to the joint and its conditions.
How the visit works
A visit follows a simple pattern: we look at the joints together, protect the area around them, do the work and tidy away. It usually takes a few hours for a handful of gaps, and longer for a whole building. In a small place like Fittleworth, access is generally the main thing to plan. If the job is outside, mention outbuildings, exposed walls and how to reach them.
- We go through the gaps on your list or survey and check each one’s size and substrate.
- Anything that is not fit for the job comes out, and the gap is cleaned.
- We put in whatever backing or fill the product detail specifies.
- We apply the fire-rated or intumescent sealant to the specified depth and tool it.
- We record the locations and products used for your records.
Before we arrive
- Mention any tricky access
- On commercial sites, let us know about site rules
- Clear the area around the work
Ask for a quote
Want a quote for fire rated sealant? Please call 0345 464 0079 or email us and tell us about the job. We’ll explain what we’d do and give you a clear price before we start.
