Fife · Scotland
Fire-rated sealant in Pitreavie, Fife
Our applicators work in Pitreavie on intumescent and fire-rated sealant around gaps, frames and service penetrations. Old sealant removed completely, joints prepared properly and every job guaranteed for a year.
- Sealant items on a fire risk assessment action list
- Fire seals that have cracked with movement
- Ordinary sealant used where a fire-rated product was needed
What the job involves on each surface
Masonry and concrete
Core-drilled and broken-out holes in concrete are often irregular. We check the gap size around the service to make sure it suits the product.
Plasterboard walls
In plasterboard walls, the condition of the board edge matters. Loose material is removed so the sealant has a firm edge.
Fire rated sealant for homes and businesses in Pitreavie
Filling a fire-stopping gap with standard silicone or caulk does not make it fire-rated. Anything unsuitable comes out first and the gap is resealed with a product tested for that use. We’re often asked to deal with seals cut through by electricians, plumbers or data installers and joints picked up in a fire-stopping survey, across flats & HMOs, door frames and linear gaps.
Commercial work around smaller Scottish places tends to mean hotels, guest houses, schools and halls rather than offices. Each needs sound sealant in its washrooms and kitchens, and fire-rated joints kept in good order.
The work is covered for a year after we finish. If anything is not right with it, email us at info@mrmastic.co.uk.
- Location
- Pitreavie (KY11, KY99)
- Wider area
- Fife
- Cover
- 12 months on all our work
- Quote
- Quoted before any work starts
- info@mrmastic.co.uk
- Last updated
- 26 October 2026
Work for landlords, hotels and businesses
Mouldy or split sealant often shows up at the end of a tenancy, and it’s easy to sort out between tenants. Several properties can be quoted together.
For anyone letting property in or around Pitreavie, several properties can go on one quote. Send us the addresses and the work at each.
Aftercare tips
After the cure time, these simple habits help:
- Store the list of sealed gaps with your building paperwork
- Plan fire stopping into any work that goes through walls or floors
- Make resealing part of every contractor’s brief
- Never patch a fire seal with standard sealant
Let contractors know where fire stopping has been done, and ask them to reseal anything they cut through. A lot of damaged fire stopping comes from later work.
Small gaps around services are simple to deal with while there are only a few. Over time, more work adds more holes.
Other services in Pitreavie
DIY versus a professional finish
A careful DIYer can reseal a simple joint, like a short, easy-to-reach joint indoors. Where it goes wrong is sealing over the old bead, working on a wet joint or overloading the gap.
Sealing over old silicone is the commonest DIY error. Silicone doesn’t stick to old silicone, so it peels away and traps moisture behind it. Everything old must be removed first.
Do you need fire rated sealant in Pitreavie?
Gaps also open up as buildings move: a seal that cracks or pulls away leaves a path for smoke. Knocks, maintenance and building work damage it further.
Common reasons people contact us include:
- Gaps around pipes and cables through fire-resisting walls
- Linear gaps at the head of walls
- Door frames with gaps between frame and wall
- Fire stopping disturbed by later work
If you let a flat or house near Rosyth station, new cables or pipes through a fire-resisting wall leave a gap that needs the right sealant.
What to look for in a quote
- What product goes in the joint
- Whether they seal over old material or remove it
- What guarantee comes with the work
- How the joint is cleaned and prepared
What we do, step by step
When we arrive, we start by going over the job with you, so there are no surprises. We protect the surfaces around the joints before any work begins. The work usually takes from a few hours to a few days, depending on the number of gaps and the access. Somewhere like Pitreavie may be a longer drive, and the journey is planned ahead. Tell us about tracks, gates, a ferry crossing or anything unusual about getting there.
- We start with the survey or action list, checking the size and surfaces of every gap.
- We remove any old or unsuitable filler and clean the gap.
- Backing or fill is fitted where the product’s tested detail calls for it.
- The sealant goes in to the depth its detail sets, then it’s tooled off.
- We record the locations and products used for your records.
Preparing for the visit
- Move anything stored near the joints
- Try not to wet indoor joints just before the visit
- On commercial sites, let us know about site rules
Ask for a quote
There’s no standard price list, because every job is different. Instead, your job gets its own clear quote. To get started, email us at info@mrmastic.co.uk.
Related advice
Commercial buildings in Pitreavie
If you run a hotel, guest house or holiday let in a coastal place like Pitreavie, busy months put washrooms and kitchens under pressure, so it’s worth checking the sealant before the busiest weeks. Scotland has its own building regulations, the Building (Scotland) Regulations, with technical handbooks. Fire-rated sealant is installed to the manufacturer’s tested details; we don’t certify buildings or carry out fire risk assessments.
If you look after a building such as Dunfermline High School, service openings in fire-resisting walls need checking after any refurbishment.
Pitreavie is about 1 mile south of Dunfermline, in Fife. Wherever you are in the KY11 postcode area, our applicators can take on fire rated sealant. Our area takes in 133 places across Fife, from the larger towns to small villages. Our Edinburgh page covers work nearby.
Our applicators cover all of the KY11 and KY99 postcode area for fire rated sealant and the streets around it. Whether your property is on Primrose Lane, Anderson Lane and Furniss Avenue or a nearby road, our applicators can take on the job. We also cover Camdean (1 mile south), Rosyth (1 mile south), Abbeyview (1 mile north), Dunfermline (1 mile north) and Limekilns (2 miles south-west). Larger places within reach include Kirkcaldy (12 miles north-east), Glenrothes (14 miles north-east), Cowdenbeath (5 miles north-east), Dysart (13 miles north-east), Dalgety Bay (3 miles east) and Lochgelly (7 miles north-east).
What’s near Pitreavie
Around Pitreavie, our work takes us to homes and buildings near Pittencrieff Park and the streets around them. There’s a railway station in Pitreavie itself: Rosyth station. Other landmarks nearby include Kingsgate Centre (1.9 miles north-west) and Lynebank Hospital (2 miles north). For a walk, there’s Loch Fitty.
Common questions in Pitreavie
How do Scotland’s building regulations apply to fire-rated sealant in Pitreavie?
Building work in Scotland comes under the Building (Scotland) Regulations and their technical handbooks. Whatever the rules, fire-rated sealant has to be installed to the manufacturer’s tested details, and that’s how we fit it. We don’t certify buildings or carry out fire risk assessments, so your fire risk assessor or building control will advise on what’s needed.
Is Pitreavie within the area you cover?
Yes, Pitreavie is covered. We work across all of Scotland, from towns to the smallest places. Longer journeys are simply planned in advance.
How much does fire rated sealant cost in Pitreavie?
There’s no set price, as it depends on the job: its size, the old material, access and the product needed. You’ll get a clear quote before we start.
Do you take on fire stopping in schools and offices?
Yes. We work in flats, HMOs, schools, offices and other commercial buildings, including occupied ones. The order of work and access are planned with you.
What information do you need?
A short description and the location, with photos by email if possible. If we need more, we’ll ask.
Where is Mr Mastic based?
We are based in Crawley, West Sussex, and we cover South East England, London and all of Scotland.
Can new sealant go over the old?
No, and we never do. It may look fine at first, but the new layer lifts away from the old one. Removing the old sealant completely is the only lasting way.
Will the old sealant be removed?
Yes. Sealing over old sealant is the main reason resealing fails early, and it’s something we never do.
Honest limits
Honest advice matters more to us than a booking, so here’s what new sealant will not do:
- Doors that aren’t fire doors in the first place
- Certifying a building or signing off its fire safety
- Large holes that need a different fire-stopping system
Not sure which it is? You can drop us a line at info@mrmastic.co.uk and we’ll tell you honestly before you book.
Surfaces we seal
- Linear gaps
- Plasterboard & masonry
- Flats & HMOs
- Pipe & cable gaps
- Service penetrations
- Door frames