Kent · England
Perry Fire Rated Sealant
Intumescent and fire-rated sealant around gaps, frames and service penetrations for Perry, backed by a one-year guarantee. Call for a quick quote.
- Ordinary sealant used where a fire-rated product was needed
- Gaps flagged on a fire risk assessment
- Fire seals that have cracked with movement
Fire rated sealant for homes and businesses in Perry
Bigger jobs can be worked through in stages, flat by flat or floor by floor, noting the locations and products as we go. That record is useful for your files and for whoever looks at the building next. We work on flats & HMOs, plasterboard & masonry and pipe & cable gaps, and the jobs we see most are fire stopping disturbed by later work and gaps where walls meet ceilings or slabs.
In a village or hamlet like Perry, commercial work is more likely to be a pub, a farm shop, holiday lets or a village hall than an office block. Each still needs sound sealant in its washrooms and kitchens, and fire-rated joints where services pass through walls.
Whatever the size of the job, it’s backed by our 12-month guarantee.
- Place
- Perry (CT3)
- Wider area
- Kent
- Cover
- 12 months on all our work
- Quotes
- Quoted before any work starts
- Phone
- 0345 464 0079
- Updated
- 26 October 2026
How the visit works
There is not much for you to do on the day. Point us to the joints and we’ll get on with it. The job generally takes a few hours for a handful of gaps, and longer for a whole building from start to finish. For a village or hamlet like Perry, the journey is planned in advance: let us know about lanes, gates and parking. We bring what the job needs, so it can be finished in one trip where possible.
- Access to each area is agreed so the work can run in order.
- Old, damaged or unsuitable sealant is removed.
- Gaps are cleaned of dust and loose material.
- We apply and tool the sealant to the product’s tested detail.
- We record what was done and flag anything that needs a different system.
Getting ready for the visit
- On commercial sites, let us know about site rules
- For indoor joints, keep the area dry beforehand if you can
- Let us know about stairs, lifts or work at height
Getting a quote
We do not publish a price list, as no two jobs are quite the same. Instead, we send you a clear quote for your job. To arrange one, phone 0345 464 0079 or send us an email.
Advice
DIY versus a professional finish
If you’ve already had a go yourself, that’s fine. We remove it and do the joint properly, so just mention it when you contact us.
A careful DIYer can reseal a simple joint, like a short, easy-to-reach joint indoors. The common mistakes are sealing over old sealant, sealing a damp joint and using far too much.
What fire rated sealant looks like in Perry
Workplaces and the common parts of blocks of flats in England need a fire risk assessment under the Regulatory Reform (Fire Safety) Order 2005, and gaps around services are often picked up there. We apply fire-rated sealant to the assessor’s or designer’s specification and the product’s tested details.
Schools such as Preston Primary School are buildings too, and gaps opened by contractors for new cabling are a common finding in schools and offices. For buildings such as Elmstone Church, gaps around pipes and cables are worth checking after any building work there.
Perry is about 7 miles east of Canterbury, in Kent. Homes, rented property, offices and hotels in Perry can book us for fire rated sealant, old or new, large or small. Every job comes with our one-year guarantee. Our Kent coverage runs to 922 places, and Perry is one of them. Our Chelmsford page covers work nearby.
Jobs for fire rated sealant in CT3 works the same way as everywhere else we cover. Whether your property is on Walmestone Road and Perry Lane or a nearby road, our applicators can take on the job. Neighbouring places we cover for fire rated sealant include Nash (1 mile east), Shatterling (1 mile south), Hoaden (1 mile east), Elmstone (1 mile north) and Broomhill (1 mile south-west). We also work in nearby towns such as Canterbury (7 miles west), Margate (9 miles north-east), Dover (11 miles south), Folkestone (14 miles south), Ramsgate (8 miles north-east) and Broadstairs (10 miles north-east).
What’s near Perry
The closest station to Perry is Adisham station, about 3.6 miles south-west of the centre. Nearby you’ll also find St Martins Hospital (5.6 miles west). For a walk, there’s Monk's Wall nature reserve.
Towns and villages near Perry
More services for Perry
Common questions in Perry
Will you come out to Perry?
Yes, we do. We work across London and the South East, and smaller places are part of that. Longer journeys are simply planned in advance.
I let a flat near Adisham station. Can you help?
Yes, landlords and agents are among the people we work for, and several properties can go on one quote. Just call 0345 464 0079 or send us an email with the address and what needs doing, and we’ll give you a clear price.
What’s the difference between intumescent and fire-rated sealant?
Intumescent means it swells when heated. Intumescent sealants are one kind of fire-rated sealant; the right one depends on the gap and what passes through it.
What do you need from me for a quote?
Where the job is, what the problem is and roughly how big it is. If you can, email a few photos.
Which products do you use?
The product depends on the job: anti-fungal sanitary silicone in wet areas, and other sealants where joints move or face the weather. Brands we use include Arbo and Everbuild.
Do you hold any approvals?
Yes. We are ARBOMaster approved, the scheme for applicators of Arbo sealants.
Will it make a mess?
We keep the work tidy. We protect what’s around the joints.
Do you carry out fire risk assessments?
No, assessment isn’t something we do. When your assessor or designer has set out what’s needed, we will quote for the sealant work on it.
Quotes for fire rated sealant in Perry
Every job gets its own quote. This is what makes a difference:
- Working hours on commercial sites
- Which sealant suits the joint
- Whether old sealant or filler has to be cut out
- The number of rooms or windows
The cost depends on the size of the job, how much old material has to come out and how easy the joints are to reach. We give a clear quote before work begins, so you know where you stand.
Helping us quote
Before you ask for a quote, have a think about:
- How many joints, rooms or windows are involved
- What’s wrong with the joints now
- Where the job is, and your postcode
- Whether it has been sealed before
Asking for a quote is easy: let us know the job and the location and its rough size. Photos by email help us understand the job, and we’ll come back to you with a quote.
When to call us in Perry
Movement in the structure can open gaps too: cracked or debonded sealant leaves an open route through the wall. Damage from cleaning, knocks and maintenance adds to it.
People generally contact us when they notice something like this:
- Fire stopping disturbed by later work
- Open gaps behind door architraves
- Gaps left after a refit or conversion
- Gaps around pipes and cables through fire-resisting walls
For landlords with property near Adisham station, any gap left by new services in shared walls should be closed with a fire-rated product.
What to look for in a quote
- Is VAT in the price?
- What preparation is included
- Who does the work, and how experienced they are
- What insurance they hold
Leave it or put it right?
Sealant is not the fix for every opening. Large holes, cable bundles and plastic pipes can call for batts, collars or wraps. If a gap is not suitable for sealant, we will tell you. In a small place like Perry, homes can be exposed to wind and rain, which finds any gap, and older walls, once damp, take a long time to dry.
No two jobs are quite the same, so we quote each one individually. Size, access and the product the joint needs all make a difference.
Why choose Mr Mastic in Perry
- Approved under the ARBOMaster scheme
- Anti-fungal sanitary silicone in wet areas
- Arbo and Everbuild products
- We never seal over old sealant
Read how sealant jobs are priced or our reviews.
Looking after it afterwards
No joint lasts for ever, but care makes a real difference. Our tips:
- Include fire stopping when you schedule refits
- Never patch a fire seal with standard sealant
- Check whether a sealant can be painted before decorating over it
- Tell trades working in the building that fire seals must be put back
Any fire seal that’s cut or drilled needs resealing to its tested detail. If you need new services through a sealed wall, plan the fire stopping as part of the job.
A flagged gap shouldn’t wait for the next assessment. Get it sealed and recorded so the item can be closed.
Honest limits
In fairness, there are a few things sealant will not fix:
- Construction that does not provide fire resistance on its own
- Certifying a building or signing off its fire safety
- Fire doors that need new seals, closers or hardware
If you are not sure, just phone 0345 464 0079 or drop us an email and we will give you a straight answer.
Joints and surfaces we work on
- Service penetrations
- Pipe & cable gaps
- Linear gaps
- Flats & HMOs
- Door frames
- Plasterboard & masonry