Reading · England
Fire-rated sealant in Norcot, Reading
Fire rated sealant in Norcot from a team with over 20 years’ experience. 180+ five-star Google reviews and a 4.9 rating.
- Unsealed gaps where pipes and cables go through a wall
- Linear gaps at the head of walls
- Ordinary sealant used where a fire-rated product was needed
Fire rated sealant in Norcot, done properly
In flats, HMOs, offices and schools, fire stopping is often disturbed by later work. A new cable run or a replaced pipe can leave an open hole behind. Those are the gaps we close, using a tested fire-rated product. If you’re dealing with joints picked up in a fire-stopping survey and open gaps behind door architraves, we can put it right, on door frames, flats & HMOs and linear gaps alike.
For a pub, café, guest house or shop in or near Norcot, its washrooms and kitchen need the same sealant care as any big building, and fire-rated sealant around service openings should be restored after new pipes or cables go through.
Whatever the size of the job, you get the same one-year guarantee in Norcot and across Reading.
- Place
- Norcot (RG30, RG31)
- Region
- Reading
- Cover
- A year, on every job
- Price
- A clear quote up front
- Phone
- 0345 464 0079
- Updated
- 26 October 2026
Fire rated sealant in Norcot: local notes
In England, the Regulatory Reform (Fire Safety) Order 2005 requires a fire risk assessment for workplaces and for the common parts of blocks of flats, and gaps around services are often picked up there. We apply fire-rated sealant to the assessor’s or designer’s specification and the product’s tested details.
Rented homes near Tilehurst station change hands often, and new cables or pipes through a fire-resisting wall leave a gap that needs the right sealant. If you look after a church, hall or community building such as Tilehurst Methodist Church, older buildings that have had new heating or wiring often have service gaps worth checking. Managing a site like Meadow Park Academy? Then fire-stopping around service openings should be restored whenever new services go in.
Norcot is about 2 miles west of Reading, in Reading. Every kind of property in Norcot can book us for fire rated sealant. Every job comes with our 12-month guarantee. We cover 34 towns and villages across Reading, large and small.
Every address in RG30 and RG31 is within our area for fire rated sealant, from the main roads to the quietest streets. Streets in the area include Ash Road, Tay Road and Tyle Road. Nearby, we also carry out fire rated sealant in Tilehurst Within (1 mile south-west), Tilehurst (1 mile west), Horncastle (1 mile south), Little Heath (1 mile west) and Fords Farm (1 mile south). Further out, we also cover Caversham (3 miles north-east), Shinfield (5 miles south-east), Arborfield Garrison (8 miles south-east), Whitley Wood (4 miles south-east), Sonning Common (4 miles north-east) and Whitley (4 miles south-east). As one of the bigger places in Reading, Norcot has homes, rented property and businesses of every kind.
Near you in Norcot
Around Norcot, our work takes us to homes and buildings near The Butchers Arms, Prospect School and Round Copse and the streets around them. Norcot’s nearest station is Tilehurst station, roughly 0.8 miles north of the centre. Well-known places in the area include Battle Hospital (1.3 miles east) and Royal Berkshire Regiment Museum (1 mile east). Not far away are South Lake and Moor Copse Nature Reserve.
Nearby places to Norcot
Other services in Norcot
What affects the cost of fire rated sealant
Every job gets its own quote. These are the things that affect it:
- Any mould that needs treating
- Access and height
- How much old sealant there is and how hard it is to remove
- Which sealant suits the joint
What it costs depends on how much there is to do, how hard the old material is to remove and how easy the joints are to reach. We give a clear quote before work begins, so you know where you stand.
What we need to know
Before you ask for a quote, have a think about:
- A few pictures by email, if you can
- If it’s domestic, commercial or a hotel
- Any access issues, like height or stairs
- If someone has resealed it before
For a quote, phone 0345 464 0079 or drop us an email and tell us where the job is and what the problem looks like. We will give you a clear price before any work starts.
Landlord and commercial work in Norcot
Mouldy or split sealant often shows up at the end of a tenancy, and it’s easy to sort out between tenants. Several properties can go on one quote.
Housing providers, facilities teams and property managers book us too. Several sites can go on one quote, and we’re fully insured for the work.
Why act early in Norcot
Sealant isn’t the fix for every opening. Large holes, cable bundles and plastic pipes can call for batts, collars or wraps. If a gap isn’t suitable for sealant, we will tell you. Around Norcot, water from a failed joint in an older home can soak into timber and plaster, which is far harder to put right than the sealant itself.
A failed joint rarely gets cheaper to fix by waiting, as water and mould keep getting in. If you’re not sure whether it needs doing, call 0345 464 0079 or send us an email for an honest opinion and a quote.
Why book with us
- More than 20 years in sealant work
- Fully insured
- 4.9 on Google from 180+ five-star reviews
- 12-month guarantee on every job
Take a look at what affects the cost and our reviews.
How the visit works
All our tools and materials come with us in the van. After a quick look at the joints together, the area is protected and the work begins. It normally takes from a few hours to a few days, depending on the number of gaps and the access. For a job in Norcot, we agree the time, the access and parking before the day. If the work is outside, the weather plays a part, as sealant needs a dry surface.
- First we work through your list or survey, measuring each gap and checking what it’s formed in.
- We remove any old or unsuitable filler and clean the gap.
- We put in whatever backing or fill the product detail specifies.
- The sealant goes in to the depth its detail sets, then it’s tooled off.
- We record the locations and products used for your records.
Preparing for the visit
- Mention any leaks or damp you’ve noticed
- Plan for the work area to be out of bounds to pets and children
- On commercial sites, let us know about site rules
How to get a quote
For fire rated sealant in Norcot, call 0345 464 0079 or email us. A short description of the job and where it is helps us quote, and you’ll get a clear quote before any work starts.
Read more
How to look after the new joints
Joint life depends on how it’s used and looked after. Here’s what we suggest:
- Take pictures of fire stopping before ceilings or boxing go back
- Store the list of sealed gaps with your building paperwork
- Don’t fill fire-stopping gaps with ordinary foam or silicone
- Include hidden areas like risers in routine checks
File the record of locations and products with your fire safety paperwork. It saves time at the next inspection or assessment.
A gap left open in a fire-resisting wall or floor lets smoke spread in ways the building wasn’t designed for. Sealing it early is a simple step to take.
Questions from Norcot
Do you cover Norcot for fire rated sealant?
Yes. Our work covers London and the South East, and Norcot is part of that. You can phone 0345 464 0079 or email us and let us know what needs doing.
Can you help a landlord with a rental near Tilehurst station?
Yes. We work for letting agents and landlords as well as householders, and several properties can go on one quote. You can call 0345 464 0079 or email us with the details for a clear quote.
Are you fully insured?
Yes. Mr Mastic is fully insured.
What’s the difference between intumescent and fire-rated sealant?
Fire-rated is the broad term for sealants tested for fire stopping. Intumescent ones swell in heat, and they’re one option among several. The specification and the tested detail decide which is used.
Can you work in occupied buildings?
Yes. Flats, HMOs, offices, schools and other occupied buildings are all part of our work. We agree access and the order of work with you first.
Can I do it myself?
That depends on the joint. High-level, external movement and fire-rated joints are professional jobs.
Do you seal gaps around fire door frames?
Yes. The joint between frame and wall is sealed with a fire-rated sealant. The door leaf and its hardware need a door specialist.
What does fire rated sealant cost?
The cost depends on the size of the job, access and how much old sealant has to come out. Ask us for a quote and we’ll talk you through it.
Can I do it myself?
Overfilling a joint is a classic DIY mistake. A thick, smeared bead looks untidy and doesn’t move well, and getting the depth right matters as much as the look.
If you’re set on DIY, put the effort into preparation: take out all the old sealant, make sure the joint is clean and dry, and give it the full cure time. If it doesn’t work out, we can still put it right.
Honest limits
We won’t take on work that will not last, so here’s what sealant cannot put right:
- Openings too large for sealant, which need batts, boards or another system
- Doors that aren’t fire doors in the first place
- Deciding what fire stopping a building needs
If you’re not sure, just ring 0345 464 0079 or send us an email and we will give you a straight answer.
Joints and surfaces we work on
- Linear gaps
- Door frames
- Pipe & cable gaps
- Flats & HMOs
- Service penetrations
- Plasterboard & masonry