Oxfordshire · England
Fire-rated sealant in Little Heath, Oxfordshire
Fire rated sealant for Little Heath and the surrounding area: the right sealant, proper preparation and a neat finish. Ask us for a quick quote.
- Sealant items on a fire risk assessment action list
- Damaged fire sealant left by other trades
- Cracked or shrunken fire-rated sealant
Fire rated sealant in Little Heath
Deciding which gaps need fire stopping isn’t our role; that comes from your fire risk assessor, designer or building control. Our part is applying the specified sealant carefully, to the right depth and with the right backing. We work on linear gaps, door frames and service penetrations, and people most often call us about new service routes left unsealed after building work and fire stopping disturbed by later work.
In a smaller place like Little Heath, commercial jobs tend to be smaller buildings: a pub, a surgery, a school, a shop or a few business units. Each needs the same care with its sealant as any larger building.
A 12-month guarantee comes with the work, just as it does everywhere we cover.
- Where
- Little Heath (RG31, RG30)
- Wider area
- Oxfordshire
- Guarantee
- 12 months on all our work
- Quote
- A clear quote up front
- Telephone
- 0345 464 0079
- Updated
- 26 October 2026
Honest limits
We will always be straight with you, so here’s what new sealant won’t do:
- Issuing a fire rating or certificate for a building
- Large holes that need a different fire-stopping system
- Construction that does not provide fire resistance on its own
If you are not sure, just ring 0345 464 0079 or send us an email and we’ll give you a straight answer.
Surfaces we seal
- Linear gaps
- Door frames
- Service penetrations
- Flats & HMOs
- Plasterboard & masonry
- Pipe & cable gaps
What affects the cost of fire rated sealant
The quote reflects the job in front of us. We look at:
- The old material and how stubborn it is
- Whether there’s mould to deal with
- The number and length of the joints
- How many areas need sealing
No two jobs are quite the same, so we quote each one individually. Size, access and the product the joint needs all play a part.
Asking for a quote
When you call or email, it’s useful to know:
- A few photos by email, if you can
- Where the property is
- Any previous sealing or DIY work
- The problem you’ve noticed
It all starts with a short chat. Describe the problem, the location and the size of the job. When it suits you, phone 0345 464 0079 or email us.
For landlords and businesses
Mouldy or split sealant often shows up at the end of a tenancy, and it’s quick to put right between tenancies. We can quote for more than one property at once.
For anyone letting property in or around Little Heath, several properties can be quoted together. Just tell us the addresses and what each one needs.
The process
There is not much for you to do on the day. Show us the job and we’ll take it from there. The job generally takes from a few hours to a few days, depending on the number of gaps and the access, including the tidy-up. In a smaller place like Little Heath, parking is seldom the issue; lanes, gates and long drives are worth mentioning. If the job is outside, tell us about side access and how high the joints are.
- Access to each area is agreed so the work can run in order.
- We take out any damaged or unsuitable sealant.
- Dust and loose debris are cleaned from each gap.
- The fire-rated or intumescent sealant is applied and tooled to the tested detail.
- We record what was done and flag anything that needs a different system.
Before we arrive
- Move anything stored near the joints
- Keep pets and children clear of the area while we work
- Mention if the joints have been sealed before
Getting a quote
We do not publish a price list. Instead, we give you a clear price for your job. To get started, ring 0345 464 0079 or drop us an email.
Related advice
When to call us in Little Heath
Over time, buildings change layout and use. A house turned into flats or an HMO, or an office split into smaller units, brings new walls, new service routes and new gaps.
The problems people normally mention when they call include:
- Gaps where walls meet ceilings or slabs
- Standard silicone or caulk in a fire-stopping gap
- Old fire sealant that has split or come away
- Damaged fire sealant left by other trades
If you look after a church, hall or community building such as St Catherine of Siena, service openings in its walls need the right fire-rated sealant, as in any building.
Questions to ask before you book
- What happens if the job turns out different
- Who does the work, and how experienced they are
- Which sealant they’ll use, and why
- How the surfaces are prepared before sealing
What happens if it’s left?
Squirting in whichever sealant is nearest does not make a fire seal. Fire-rated products are tested in set gap sizes, depths and substrates, which is why we match the product and the method to each gap. Around Little Heath, water from a failed joint in an older home can soak into timber and plaster, which is far harder to put right than the sealant itself.
Homes and businesses are quoted the same way: how much there is to do, how we reach it and what it needs, plus any working-time requirements on site. Call for a quick quote and we will explain what it covers.
Why book with us
- 20+ years of sealant experience
- Trusted Arbo and Everbuild sealants
- Domestic, commercial and hotel work
- Tidy, careful work
Take a look at how sealant jobs are priced or our reviews.
How to look after the new joints
Joint life depends on how it’s used and looked after. We suggest:
- Plan fire stopping into any work that goes through walls or floors
- Do not paint over fire sealant until it has cured
- Get damaged fire seals looked at promptly
- Keep pictures of seals that will be hidden
Keep the record we give you with the building’s fire safety documents. It saves time at the next inspection or assessment.
Any job that breaks through a wall or ceiling should include resealing. Doing it at the time avoids leaving gaps behind.
Questions from Little Heath
Can you do fire rated sealant in Little Heath?
Yes, Little Heath is within the area we cover. Our work covers London and the South East. Just call 0345 464 0079 or email us with a few details of the job.
Do you work for landlords with property near Tilehurst station?
Yes, rental work is part of what we do. You can ring 0345 464 0079 or drop us an email with the address and a few details, and we will give you a fixed price before we start.
What’s the difference between intumescent and fire-rated sealant?
Intumescent describes a material that swells in heat. Intumescent sealants are a type of fire-rated sealant and which one is used depends on the job.
Do you take out the old sealant first?
Yes. All of the old material is cut out and the joint cleaned before applying anything new.
Should I try DIY first?
Some simple jobs can be done by a careful DIYer. The usual mistakes are sealing over old sealant, sealing a damp joint and using too much.
Do the sealants smell?
Possibly a little. It fades as the sealant cures, and ventilation helps.
Can you match the sealant colour?
Most of the time, yes. We’ll explain which colours are available and agree one before work begins.
Can you work in occupied buildings?
Yes, in flats, HMOs, schools, offices and other buildings, occupied or empty. Tell us how the building is used and we will plan around it.
What fire rated sealant looks like in Little Heath
Workplaces and the common parts of blocks of flats in England need a fire risk assessment under the Regulatory Reform (Fire Safety) Order 2005, and gaps around services are often picked up there. We apply fire-rated sealant to the assessor’s or designer’s specification and the product’s tested details.
Rented homes near Tilehurst station change hands often, and new cables or pipes through a fire-resisting wall leave a gap that needs the right sealant. For site and facilities teams at buildings such as Birch Copse Primary School, service openings in fire-resisting walls need checking after any refurbishment.
Little Heath is about 3 miles west of Reading, in Oxfordshire. Homes, rented property, offices and hotels in Little Heath can book us for fire rated sealant. Every job comes with our 12-month guarantee. Our Oxfordshire coverage runs to 443 places, and Little Heath is one of them.
Work in RG31 and RG30 works the same way as everywhere else we cover. That includes homes and businesses on City Road, Kiln Lane and Back Lane. Nearby, we also carry out fire rated sealant in Tilehurst (1 mile east), Sulham (1 mile north-west), Tilehurst Within (1 mile east), Calcot (1 mile south) and Norcot (1 mile east). We also work in nearby towns such as Didcot (13 miles north-west), Henley-on-Thames (8 miles north-east), Benson (11 miles north), Wallingford (10 miles north), Great Western Park (14 miles north-west) and Watlington (13 miles north).
Near you in Little Heath
We work in homes and buildings around Fox and Hounds pub, Calcot Park and Little Heath School and the streets around them. For rail, the closest station is Tilehurst station, roughly 1.4 miles north-east. Other landmarks nearby include Broad Street Mall (3.4 miles east) and Battle Hospital (2.5 miles east). The countryside around Little Heath includes Moor Copse Nature Reserve and Hosehill Lake.