Reading · England
Shinfield Fire Rated Sealant
Fire rated sealant for Shinfield, by sealant specialists with 20+ years’ experience. Rated 4.9 on Google from 180+ five-star reviews.
- Gaps around pipes and cables through fire-resisting walls
- Old fire sealant that has split or come away
- Open gaps behind door architraves
How we handle fire rated sealant in Shinfield
Until it’s heated, intumescent sealant behaves like an ordinary sealant; then it swells to help close the gap. The right product depends on the gap size, the substrate and what passes through, so we follow the tested detail for each one. We work on service penetrations, pipe & cable gaps and plasterboard & masonry, and people most often call us about unsealed gaps where pipes and cables go through a wall and joints picked up in a fire-stopping survey.
If you run a pub, café, guest house or shop in or near Shinfield, the washrooms and kitchen need the same attention as a big site.
You’re covered for a year from the day we finish. If there’s a problem with it, please call 0345 464 0079 or email us.
- Place
- Shinfield (RG2)
- Region
- Reading
- Guarantee
- One year on every job
- Quote
- A clear quote up front
- Telephone
- 0345 464 0079
- Page updated
- 26 October 2026
FAQs for Shinfield
Do you cover smaller places like Shinfield?
Yes. Shinfield is within the area we cover, which takes in towns, villages and rural addresses. Our work covers London and the South East. Just mention lanes, gates or anything else about the route when you book.
Do you work for landlords with property near Reading Green Park station?
Yes. We work for landlords and letting agents as well as householders. Just ring 0345 464 0079 or email us with the address and what needs doing, and we’ll give you a clear quote.
Do you remove the old sealant?
Yes, always, and completely. New sealant will not bond properly to old, so any old material comes out before anything new goes in.
What does intumescent mean?
Fire-rated is the broad term for sealants tested for fire stopping. Intumescent types expand when heated, and they’re one option among several. The specification and the tested detail decide which is used.
Can I add another job to the visit?
Yes, we can. More than one area can be quoted together.
Is standard sealant good enough for a fire gap?
No. Standard sealants are not made or tested to stop fire. If it’s been used, we remove it and use the right product.
Should I try DIY first?
It depends on the job. Work at height, movement joints, fire-rated gaps and large areas are best left to a professional, while a short indoor joint may be within reach.
Can you give us a record of the work?
Yes. Locations and products are written up when we finish. Tell us if your assessor needs it in a particular format.
How it works
When we get to you, we check the joints match what you told us. If anything is different, we explain it before carrying on. Most jobs then take from a few hours to a few days, depending on the number of gaps and the access. A visit to Shinfield is planned like any other: the time, the access and where to park are agreed in advance. Outdoor jobs depend on a dry day, since sealant needs a dry surface.
- First we work through your list or survey, measuring each gap and checking what it’s formed in.
- Old or unsuitable sealant is cut out and the gap cleaned.
- We put in whatever backing or fill the product detail specifies.
- The sealant goes in to the depth its detail sets, then it’s tooled off.
- Finally, we list where we worked and what we used, for your records.
Preparing for the visit
- Let us know if you’ve seen damp or leaks
- Let us know about parking restrictions
- Keep children and pets away from the work area
Ask for a quote
Asking for a quote is easy: let us know what needs doing and where. Photos by email help us understand the job.
Advice
Quotes for fire rated sealant in Shinfield
Call for a quick quote. The main things that affect it are:
- The old material and how stubborn it is
- How easy the joints are to reach
- Mould in or behind the old joints
- The number and length of the joints
Rather than a set price list, we price the job in front of us: the amount of work, the old material and the access. You’ll know the price before we begin.
What we need to know
Before you ask for a quote, have a think about:
- Whether it has been sealed before
- Where the property is
- Whether it’s a home or a business
- What’s wrong with the joints now
For a quick quote, get us on the phone, or email us if that is easier. Tell us about the joints that need doing and we will explain what’s involved and give you a clear price.
Work for landlords, hotels and businesses
If you manage several properties in or around Shinfield, jobs at different addresses can be quoted together. Just tell us the addresses and what each one needs, and pictures by email help.
Businesses can book us for washrooms, kitchens, offices and more. For commercial premises, we can talk through working times when we quote.
Nearby places to Shinfield
More services for Shinfield
DIY versus a professional finish
What a professional job adds is preparation and the right product. We take joints back to clean, dry surfaces, and the sealant is matched to the joint and its conditions, then guaranteed for a year.
Some jobs are best left to a professional: work at height, external movement joints, fire-rated sealant and large areas call for the right materials, safe access and experience.
Keeping the joints in good condition
No joint lasts for ever, but care makes a real difference. Our tips:
- Don’t fill fire-stopping gaps with ordinary foam or silicone
- Report cracked or damaged seals as soon as you notice them
- Include hidden areas like risers in routine checks
- Ask every contractor to reseal any fire stopping they disturb
Follow the cure time we give you before decorating over the sealant. Some fire-rated sealants can be painted and some can’t.
A gap left open in a fire-resisting wall or floor lets smoke spread in ways the building wasn’t designed for. Closing it is normally a straightforward job.
Leave it or put it right?
An open gap in a fire-resisting wall is a route for smoke and fire. Sealing it properly restores what the wall was there to do, and the sealing itself is often a contained piece of work. Homes in smaller places like Shinfield can face more weather, and failed outside joints let damp into walls. Indoors, a failed seal lets water into floors and panels as it would anywhere.
A few things move the cost up or down: how much old sealant there is and how stubborn it is, any mould to treat, and whether we need extra access for height. Your quote takes all of that into account.
Why us?
- Experience in homes, commercial sites and hotels
- Quality sealants from Arbo and Everbuild
- An ARBOMaster approved applicator
- Fully insured
Take a look at our cost guide and customer reviews.
Fire rated sealant in Shinfield: local notes
In England, the Regulatory Reform (Fire Safety) Order 2005 requires a fire risk assessment for workplaces and for the common parts of blocks of flats, and gaps around services are often picked up there. We apply fire-rated sealant to the assessor’s or designer’s specification and the product’s tested details.
Schools such as Shinfield Infant and Nursery School are buildings too, and service openings in fire-resisting walls need checking after any refurbishment. If you look after a church, hall or community building such as Church of St Mary the Virgin, service openings in its walls need the right fire-rated sealant, as in any building. Rented homes near Reading Green Park station change hands often, and new cables or pipes through a fire-resisting wall leave a gap that needs the right sealant.
Shinfield is about 3 miles south of Reading, in Reading. Jobs in Shinfield get the same care as everywhere else we work: the old material taken out, joints prepared properly and a 12-month guarantee. 34 places in Reading are on our list, large and small.
We cover every part of RG2 for fire rated sealant and the streets around it. If you need fire rated sealant at a property on Teal Grove, Songbird Close and Skylark Way or anywhere close by, we can help. We also cover the places around Shinfield: Ryeish Green (1 mile south-west), Whitley Wood (1 mile north-west), Three Mile Cross (1 mile west), Great Lea Common (1 mile west) and Arborfield (2 miles east). Within a short drive, we also cover Caversham (5 miles north), Norcot (5 miles north-west), West Reading (4 miles north-west), Tilehurst Within (5 miles north-west), Arborfield Garrison (3 miles south-east) and Caversham Heights (5 miles north). Shinfield is one of the larger places we cover in Reading.
Near you in Shinfield
We work in homes and buildings around Pearman's Copse, Ryeish Green School and Oakbank and the streets around them. The nearest railway station is Reading Green Park station, about 2.6 miles north-west. A little further out are Berkshire Library & Museum of Freemasonry (2.9 miles north-east) and Royal Berkshire Hospital (3.1 miles north). Open spaces near Shinfield include Longwater and Sonning Hill.
What we cannot put right
We’d rather tell you now than do work that will not last, so these are the limits:
- A wall that isn’t a fire-resisting element to begin with
- Fire doors that need new seals, closers or hardware
- Sign-off of the building, which sits with building control or your assessor
If in doubt, call 0345 464 0079 or email us and we will say what we think.
Surfaces we seal
- Plasterboard & masonry
- Door frames
- Pipe & cable gaps
- Flats & HMOs
- Linear gaps
- Service penetrations