West Berkshire · England
Fire-rated sealant in Three Mile Cross, West Berkshire
We cover Three Mile Cross for intumescent and fire-rated sealant around gaps, frames and service penetrations. Old material cut out, joints cleaned and sealed neatly and a one-year guarantee.
- Gaps left after a refit or conversion
- Linear gaps at the head of walls
- Ordinary sealant used where a fire-rated product was needed
About our fire rated sealant in Three Mile Cross
Later work by other trades often breaks through fire stopping, especially in flats, HMOs, offices and schools. A new cable run or a replaced pipe can leave an open hole behind. Those are the gaps we close, using a tested fire-rated product. We are often asked to deal with gaps filled with a product that isn’t fire-rated and fire stopping disturbed by later work, across door frames, pipe & cable gaps and linear gaps.
If you have holiday lets, a converted barn used for business or a community building near Three Mile Cross, washroom and kitchen sealant and any fire-rated joints need the same attention as anywhere.
A one-year guarantee comes as standard, so you’re not left on your own once the job is done.
- Location
- Three Mile Cross (RG7)
- Wider area
- West Berkshire
- Cover
- A year, on every job
- Quotes
- A clear price before any work starts
- Call
- 0345 464 0079
- Last updated
- 26 October 2026
Surface by surface
Service penetrations
Service penetrations are where new gaps often appear. We clean out what’s there and reseal to the right depth.
Flats and HMOs
In occupied buildings, we plan the order of work with you. We agree access to each flat and the common parts before we start so residents know what to expect.
Keeping the joints in good condition
Simple care keeps the joints in good condition. We recommend:
- Keep general-purpose foam and caulk away from fire-stopping gaps
- Store the list of sealed gaps with your building paperwork
- Get damaged fire seals looked at promptly
- Include fire stopping when you schedule refits
Any fire seal that is cut or drilled needs resealing to its tested detail. If you need new services through a sealed wall, plan the fire stopping as part of the job.
A gap left open in a fire-resisting wall or floor lets smoke spread in ways the building wasn’t designed for. Sealing it early is a simple step to take.
What we’re called out for in Three Mile Cross
A lot of fire stopping is out of sight: in ceiling voids, service risers and behind boxing. Because nobody sees it, gaps go unnoticed until an assessor or surveyor looks.
It’s worth asking for a quote if you see:
- Standard silicone or caulk in a fire-stopping gap
- Linear gaps at the head of walls
- Seals cut through by electricians, plumbers or data installers
- Cracked or shrunken fire-rated sealant
If you look after a church, hall or community building such as St Michael and All Angels, service openings in its walls need the right fire-rated sealant, as in any building.
Comparing quotes
- How long to leave it before use
- Whether they seal over old material or remove it
- Whether you can choose the colour
- What product goes in the joint
Places near Three Mile Cross
What else we do in Three Mile Cross
What affects the cost of fire rated sealant
There’s no set price list, because no two jobs are the same. The quote depends on:
- How many areas need sealing
- Which sealant suits the joint
- The number and length of the joints
- Whether the work is at height
A few things move the cost up or down: how much old sealant there is and how stubborn it is, any mould to treat, and whether we need extra access for height. We take all of that into account in your quote.
Asking for a quote
Photos help, but a description is a good start. Please mention:
- The problem you’ve noticed
- Any access issues, like height or stairs
- Where the job is, and your postcode
- The type of property
A good description makes for an accurate quote. Let us know the location, the problem and roughly how many joints, and add pictures by email if you can.
Should I try it myself first?
Some sealant jobs are within reach of a careful DIYer, like a short, easy-to-reach joint indoors. The common mistakes are sealing over old sealant, sealing a damp joint and using far too much.
Overfilling a joint is a classic DIY mistake. A thick, smeared bead looks untidy and doesn’t move well, and getting the depth right matters as much as the look.
Commercial buildings in Three Mile Cross
In England, the Regulatory Reform (Fire Safety) Order 2005 requires a fire risk assessment for workplaces and for the common parts of blocks of flats, and gaps around services are often picked up there. We work to the specification you are given, installing the product to its tested details.
For landlords with property near Reading Green Park station, new cables or pipes through a fire-resisting wall leave a gap that needs the right sealant.
Three Mile Cross is about 3 miles south of Reading, in West Berkshire. Jobs in Three Mile Cross get the same care as everywhere else we work: old sealant removed completely, careful preparation and a one-year guarantee. We cover 155 towns and villages across West Berkshire, from the larger towns to small villages.
Work in RG7 is quoted and booked the same way as anywhere else. Streets in the area include Dairy Grove, Basingstoke Road and Buttermilk Grove, and we cover them all. If you’re just outside Three Mile Cross, we cover Ryeish Green (1 mile south-east), Great Lea Common (1 mile north-west), Whitley Wood (1 mile north-east), Shinfield (1 mile east) and Green Park (2 miles north-west). We also work in nearby towns such as Newbury (15 miles west), Thatcham (12 miles west), Burghfield Common (4 miles west), Speenhamland (15 miles west), Calcot (4 miles north-west) and Shaw (15 miles west).
Near you in Three Mile Cross
Locally, jobs take us to homes and businesses close to The Farriers Arms, Pearman's Copse and Ryeish Green School and the streets around them. Three Mile Cross’s nearest station is Reading Green Park station, roughly 2 miles north-west of the centre. Nearby you’ll also find Beaumys Castle (2.1 miles south) and The Oracle (3.3 miles north). Not far away are Longwater and Fobney Island Wetland Reserve.
The process
Before we leave, we go over the finished joints with you and explain the cure time. The visit itself usually takes from a few hours to a few days, depending on the number of gaps and the access, depending on how much there is to do. Somewhere like Three Mile Cross needs a little journey planning: let us know about lanes, gates and parking. Everything for the job comes with us, so a second trip is avoided where possible.
- We start with the survey or action list, checking the size and surfaces of every gap.
- Anything that isn’t fit for the job comes out, and the gap is cleaned.
- Where the tested detail needs backing or fill, we fit it.
- Fire-rated or intumescent sealant is applied to the right depth and tooled.
- Locations and products are noted so you have them on file.
How to prepare
- Tell us about any previous sealing or DIY attempts
- Mention any parking rules near the property
- For business premises, tell us about site rules or sign-in
Get a quote
Getting a quote is simple: tell us what needs doing and where. A few pictures by email make the job easier to understand.
Advice
Three Mile Cross questions
Will you come out to Three Mile Cross?
Yes, smaller places are covered as well as towns. Our work covers London and the South East. Let us know about access, parking and anything unusual about getting there when you book.
Do you work for landlords with property near Reading Green Park station?
Yes, we work for landlords and letting agents. You can ring 0345 464 0079 or drop us an email with the address and a few details, and we’ll give you a fixed price before work begins.
Is standard sealant good enough for a fire gap?
No. A gap that needs fire stopping needs a tested fire-rated product fitted to the maker’s details.
Do you hold any approvals?
Yes. We hold ARBOMaster approved applicator status and we’re fully insured too.
Is it OK to seal over old sealant?
No, and we never do. It may look fine at first, but the new layer lifts away from the old one. Removing the old sealant completely is the only lasting way.
Do you carry out fire risk assessments?
No. We work from the specification you give us and install to the manufacturer’s details.
Does someone need to be in?
For indoor joints, yes, someone needs to let us in. After that, you can carry on with your day.
Where do you work from?
We’re based in Crawley, and we cover South East England, London and all of Scotland.
What sealant work can’t fix
Before booking, it’s worth knowing the limits too:
- Openings too large for sealant, which need batts, boards or another system
- Assessing a building’s fire safety
- Construction that doesn’t provide fire resistance on its own
If you’re not sure, just ring 0345 464 0079 or send us an email and we’ll give you a straight answer before booking.
What we seal
- Flats & HMOs
- Pipe & cable gaps
- Linear gaps
- Plasterboard & masonry
- Door frames
- Service penetrations