Surrey · England
Fire Rated Sealant in Nalderswood
Intumescent and fire-rated sealant around gaps, frames and service penetrations for homes and businesses in Nalderswood and across Surrey. ARBOMaster approved applicators, fully insured, with a one-year guarantee.
- Sealant items on a fire risk assessment action list
- Open holes round services passing through fire walls
- Door frames with gaps between frame and wall
About our fire rated sealant in Nalderswood
We often work from an action list drawn up by a fire risk assessor. If you share the list, we can quote for the gaps that need fire-rated sealant. We work on door frames, flats & HMOs and linear gaps, and the jobs we see most are door frames with gaps between frame and wall and fire stopping disturbed by later work.
In a village or hamlet like Nalderswood, commercial work is more likely to be a pub, a farm shop, holiday lets or a village hall than an office block. They all have washrooms, kitchens and service openings that need the right sealant.
The work is covered for a year after we finish. If anything isn’t right with it, call 0345 464 0079 or drop us an email.
- Where
- Nalderswood (RH2)
- Wider area
- Surrey
- Cover
- One year on every job
- Quotes
- Quoted before any work starts
- Call
- 0345 464 0079
- Page updated
- 26 October 2026
How we quote for fire rated sealant
Every job gets its own quote. These are the things that affect it:
- Working hours on commercial sites
- The product the joint needs
- The number and length of the joints
- Any mould that needs treating
There are no prices on our website, because each job is priced on what it involves. For a quick quote, please ring 0345 464 0079 or send us an email.
Helping us quote
A few details help us give you an accurate quote. When you ask for a quote, tell us:
- If someone has resealed it before
- Access, such as stairs, a lift or height
- The address or postcode of the job
- Whether it’s a home or a business
For a quick quote, get us on the phone, or email us if that is easier. Describe what needs sealing and we’ll talk you through the work.
How the visit works
There is not much for you to do on the day. Point us to the joints and we will get on with it. The job generally takes anything from a few hours to several days, depending on how many gaps there are. Somewhere like Nalderswood needs a little journey planning: let us know about lanes, gates and parking. Everything for the job comes with us, so a second trip is avoided where possible.
- We start with the survey or action list, checking the size and surfaces of every gap.
- We remove any old or unsuitable filler and clean the gap.
- We put in whatever backing or fill the product detail specifies.
- The sealant goes in to the depth its detail sets, then it’s tooled off.
- We record the locations and products used for your records.
Getting ready for the visit
- Let us know about stairs, lifts or work at height
- Keep pets and children clear of the area while we work
- Clear the area around the work
Get a quote
We quote each job on its own, so the first step is telling us about yours. Simply ring 0345 464 0079 or send us an email and describe the job, and photos are welcome.
Related advice
Common questions in Nalderswood
Can you help a landlord with a rental near Salfords station?
Yes, landlords and agents are among the people we work for, and several properties can go on one quote. You can call 0345 464 0079 or drop us an email with the details for a clear quote.
Is Nalderswood in your area for fire rated sealant?
Yes, Nalderswood is within the area we cover. We work across London and the South East. Just ring 0345 464 0079 or email us with a few details of the job.
Can you seal over the old sealant?
No. Fresh sealant doesn’t stick to old sealant, and anything trapped underneath, including mould and water, stays there. It all has to come out first.
Are you insured?
Yes. Full insurance covers our work, and we can confirm the details when we quote.
Are you ARBOMaster approved?
Yes. ARBOMaster is the approved applicator scheme for Arbo sealants, and we are part of it.
Do you carry out fire risk assessments?
No. We follow the requirements from your assessor, designer or building control, and apply each product to its tested details.
Do you take on fire stopping in schools and offices?
Yes, in flats, HMOs, schools, offices and other buildings, occupied or empty. Let us know the building’s hours and we will plan the work to suit.
Can ordinary silicone be used in a fire-stopping gap?
No. Standard sealants are not made or tested to stop fire. If it’s been used, we remove it and use the right product.
DIY versus a professional finish
If you are set on DIY, put the effort into preparation: remove every trace of old sealant, clean and dry the joint, and follow the product’s cure time. If it doesn’t work out, we can still put it right.
Sealing over old silicone is the commonest DIY error. New silicone will not bond to old, so it peels away and traps moisture behind it. All the old material has to come out first.
Fire rated sealant in Nalderswood: local notes
Workplaces and the common parts of blocks of flats in England need a fire risk assessment under the Regulatory Reform (Fire Safety) Order 2005, which is often where open fire-stopping gaps are first noticed. We apply fire-rated sealant to the assessor’s or designer’s specification and the product’s tested details.
For site and facilities teams at buildings such as Burys Court School, service openings in fire-resisting walls need checking after any refurbishment. For buildings such as Church of St Bartholomew, older buildings that have had new heating or wiring often have service gaps worth checking. If you let a flat or house near Salfords station, any gap left by new services in shared walls should be closed with a fire-rated product.
Nalderswood is about 3 miles west of Horley, in Surrey. Our applicators cover fire rated sealant for homeowners, landlords and businesses in Nalderswood, as part of our work across Surrey. We cover 395 towns and villages across Surrey, large and small. Crawley is on our list too, around 6 miles away.
Work in RH2 is quoted and booked the same way as anywhere else. Fire rated sealant is available to properties on Smalls Hill Road and Deanoak Lane. We also cover the places around Nalderswood: Norwood Hill (1 mile south-east), Shellwood Cross (1 mile west), Parkgate (2 miles south-west), Cudworth (2 miles south-west) and Charlwood (3 miles south). Larger places within reach include Guildford (15 miles west), Epsom (10 miles north), Horley (3 miles east), Redhill (4 miles north-east), Ewell (11 miles north) and Reigate (3 miles north-east).
Near you in Nalderswood
Typical jobs here are in homes near Edolph's Copse. For rail, the closest station is Salfords station, about 3.4 miles east of the centre. Other landmarks nearby include Reigate Priory Museum (3.3 miles north-east) and East Surrey Hospital (3.7 miles north-east). Not far away are Reigate Heath and Colley Hill.
What sealant work can’t fix
We’d rather tell you now than do work that will not last, so here’s what sealant can’t put right:
- Walls or floors that weren’t built to resist fire
- Deciding what fire stopping a building needs
- Fire doors that need new seals, closers or hardware
Not sure which it is? You can call 0345 464 0079 or email us and we’ll tell you honestly.
Where we work in Nalderswood
- Flats & HMOs
- Service penetrations
- Linear gaps
- Plasterboard & masonry
- Pipe & cable gaps
- Door frames
How the job changes by surface
Linear gaps
A linear joint may need to allow for movement as well as fire. We choose a product and depth that suit the gap and the movement from the manufacturer’s details.
Door frames
The gap between a door frame and the wall around it needs sealing as well as the door itself. We fill it with a fire-rated product suited to the materials either side.
Towns and villages near Nalderswood
What else we do in Nalderswood
Work for landlords, hotels and businesses
Whether it’s one flat or a portfolio, the work is the same standard: old sealant fully removed, joints prepared properly and a 12-month guarantee.
If you manage several properties in or around Nalderswood, jobs at different addresses can go on one quote. Send us the addresses and the work at each, and photos by email help.
Keeping the joints in good condition
After the cure time, these simple habits help:
- File the fire-stopping record where your assessor can find it
- Make resealing part of every contractor’s brief
- Ask which product was used before you paint
- Allow for resealing whenever new services are run
Any fire seal that’s cut or drilled needs resealing to its tested detail. If you need new services through a sealed wall, plan the fire stopping as part of the job.
If a fire risk assessment has flagged a gap, do not leave it for the next one. Have it sealed, then keep the record so you can show it was dealt with.