Aberdeenshire · Scotland
Fire Rated Sealant in Kirktown
Fire rated sealant for Kirktown and the surrounding area: careful preparation, the right product and tidy work. Ask us for a quick quote.
- Linear gaps at the head of walls
- Gaps flagged on a fire risk assessment
- New service routes left unsealed after building work
Fire rated sealant in Kirktown
Filling a fire-stopping gap with standard silicone or caulk does not make it fire-rated. We cut out the wrong material and the gap is resealed with a product tested for that use. We work on pipe & cable gaps, service penetrations and door frames, and the jobs we see most are unsealed gaps around fire door frames and linear gaps at the head of walls.
For a place like Kirktown, the journey and timings are planned in advance, so it can be fitted around bookings or opening times where possible.
You’re covered for a year from the day we finish. If anything isn’t right with it, drop us a line at info@mrmastic.co.uk.
- Where
- Kirktown (AB42)
- Wider area
- Aberdeenshire
- Guarantee
- One year on every job
- Quote
- A clear price before any work starts
- info@mrmastic.co.uk
- Page updated
- 26 October 2026
How to look after the new joints
Joint life depends on how it’s used and looked after. Here’s what we suggest:
- Ask which product was used before you paint
- Get damaged fire seals looked at promptly
- Keep general-purpose foam and caulk away from fire-stopping gaps
- Plan fire stopping into any work that goes through walls or floors
Leave the sealant to cure fully before painting near it. Not every fire-rated sealant takes paint and we will tell you which one you have.
A gap left open in a fire-resisting wall or floor lets smoke spread in ways the building wasn’t designed for. Sealing it early is a simple step to take.
What affects the cost of fire rated sealant
Your quote is based on your job. We take into account:
- Working hours on commercial sites
- How easy the joints are to reach
- The type of sealant required
- How many areas need sealing
We do not show prices on the website, because the cost depends so much on the job itself. For a quick quote, please send an email to info@mrmastic.co.uk.
Helping us quote
You do not need to know the technical terms. It helps if you can tell us:
- The problem you’ve noticed
- If it’s domestic, commercial or a hotel
- The rough size of the job
- How we’d reach the joints
Asking for a quote is easy: tell us what needs doing and where. Photos by email help us understand the job, and we’ll come back to you with a quote.
What fire rated sealant looks like in Kirktown
For seaside hotels, guest houses and holiday lets around Kirktown, heavy use in the busy months is hard on washroom and kitchen sealant, and any building work there should leave fire-rated joints made good. In Scotland, building work comes under the Building (Scotland) Regulations and their technical handbooks. Fire-rated sealant is installed to the manufacturer’s tested details; we do not certify buildings or carry out fire risk assessments.
In and around Kirktown, as anywhere, good fire rated sealant starts with a clean, dry, properly prepared joint.
Kirktown is about 4 miles north-west of Peterhead, in Aberdeenshire. Kirktown gets the same service as everywhere we cover: old sealant removed completely, careful preparation and a one-year guarantee. Kirktown is one of 161 places in Aberdeenshire we cover. We also work in Aberdeen, around 30 miles away.
Work in AB42 is quoted and booked the same way as anywhere else. If you need fire rated sealant at a property on Netherhill Road and Kinloch Road or anywhere close by, we can help. If you’re just outside Kirktown, we cover St Fergus (1 mile east), Rora (2 miles south-west), Keyhead (3 miles north-west), Inverugie (3 miles south) and Downiehills (3 miles south). Within a short drive, we also cover Peterhead (4 miles south-east), Fraserburgh (11 miles north-west), Roanheads (4 miles south-east), Clerkhill (4 miles south-east), Port Henry (4 miles south-east) and Mintlaw (6 miles south-west).
Around Kirktown
Other landmarks nearby include Inverugie Castle (2.4 miles south) and Ugie Hospital (3.6 miles south-east). The countryside around Kirktown includes Loch of Strathbeg and Meet Hill.
For landlords and businesses
Mouldy or split sealant often shows up at the end of a tenancy, and it’s easy to sort out between tenants. We can quote for more than one property at once.
We also work for property managers and facilities teams. Several sites can go on one quote.
When to call us in Kirktown
Movement in the structure can open gaps too: cracked or debonded sealant leaves an open route through the wall. Knocks, maintenance and building work damage it further.
These are the problems we are asked about most:
- Gaps around pipes and cables through fire-resisting walls
- Gaps left after a refit or conversion
- Gaps flagged on a fire risk assessment
- Open joints along the top of partitions
If you look after a church, hall or community building such as St Fergus Parish Church and Churchyard, service openings in its walls need the right fire-rated sealant, as in any building.
What your quote should include
- Is VAT in the price?
- Which colour the sealant will be
- What guarantee comes with the work
- How the joint is cleaned and prepared
When something else is needed
Before you book, it’s worth knowing the limits too:
- Deciding what fire stopping a building needs
- Fire doors that need new seals, closers or hardware
- Certifying a building or signing off its fire safety
If in doubt, drop us a line at info@mrmastic.co.uk and we’ll say what we think.
Joints and surfaces we work on
- Door frames
- Flats & HMOs
- Pipe & cable gaps
- Plasterboard & masonry
- Service penetrations
- Linear gaps
Surface by surface
Plasterboard walls
In plasterboard walls, the condition of the board edge matters. Crumbling edges are cleaned back before the sealant goes in.
Service penetrations
Wherever a service goes through a fire-resisting wall or floor, there’s a gap around it. The sealant is chosen for what passes through and how wide the gap is.
The process
Once we are on site, we check the joints match what you told us. If anything is different, we explain it before carrying on. After that, the work takes from a few hours to a few days, depending on the number of gaps and the access. Outdoor work around Kirktown depends on the weather, as sealant needs a dry surface, so external jobs may need to move if the day turns wet. Indoor work goes ahead whatever the weather.
- Access to each area is agreed so the work can run in order.
- Old, damaged or unsuitable sealant is removed.
- Gaps are cleaned of dust and loose material.
- We apply and tool the sealant to the product’s tested detail.
- Locations and products are written up and any gaps unsuitable for sealant are flagged.
Getting ready for the visit
- Mention any parking rules near the property
- Clear items away from the joints we are working on
- Try not to wet indoor joints just before the visit
How to get a quote
A good description makes for an accurate quote. Let us know the location, the problem and roughly how many joints.
Advice
Towns and villages near Kirktown
Also in Kirktown
Your questions about fire rated sealant in Kirktown
How do Scotland’s building regulations apply to fire-rated sealant in Kirktown?
Building work in Scotland comes under the Building (Scotland) Regulations and their technical handbooks. Fire-rated sealant has to go in to the product’s tested details, and we follow them. We don’t certify buildings or carry out fire risk assessments, so your fire risk assessor or building control will advise on what’s needed.
Is Kirktown within the area you cover?
Yes, Kirktown is covered. We work across all of Scotland, from towns to the smallest places. Longer journeys are simply planned in advance.
Can you quote for more than one area?
Yes. Tell us about everything you’d like done and you will get one quote.
How long will you be here?
Typically it takes anything from a few hours to several days, depending on how many gaps there are. Bigger jobs take longer.
Do I need to be at home?
For indoor joints, yes, someone needs to let us in. After that, you can carry on with your day.
Are you fully insured?
Yes. We’re fully insured.
Do you remove the old sealant?
Yes, every time. New sealant will not bond properly to old, so any old material comes out before anything new goes in.
Do the sealants smell?
Possibly a little. It fades as the sealant cures, and ventilation helps.