Aberdeenshire · Scotland
Fire Rated Sealant in Mintlaw
Intumescent and fire-rated sealant around gaps, frames and service penetrations for householders, landlords and businesses in Mintlaw. Fully insured, ARBOMaster approved and guaranteed for a year.
- Unsealed gaps around fire door frames
- Gaps left after a refit or conversion
- Fire stopping disturbed by later work
Commercial buildings in Mintlaw
Scotland has its own building regulations, the Building (Scotland) Regulations, with technical handbooks. We install fire-rated sealant to the product’s tested details; we don’t certify buildings or carry out fire risk assessments.
In and around Mintlaw, as anywhere, good fire rated sealant starts with a clean, dry, properly prepared joint.
Mintlaw is about 8 miles west of Peterhead, in Aberdeenshire. Anywhere in AB42, we cover fire rated sealant for homes and businesses. We cover 161 towns and villages across Aberdeenshire. There’s also a page for Aberdeen, roughly 26 miles from Mintlaw.
Here we cover the AB42 postcode area for fire rated sealant. That includes homes and businesses on The Square, Station Road and Sycamore Place. Main roads around Mintlaw include the A950. Close by, we work in Old Deer (1 mile west), Fetterangus (2 miles north), Stuartfield (2 miles south-west), Longside (2 miles east) and New Leeds (4 miles north). We also work in nearby towns such as Peterhead (8 miles east), Fraserburgh (11 miles north), Ellon (11 miles south), Roanheads (9 miles east), Clerkhill (8 miles east) and Port Henry (9 miles east).
Near you in Mintlaw
Locally, jobs take us to homes and businesses close to Aden Country Park and the streets around them. Other landmarks nearby include Maud Hospital (4.5 miles west) and Aberdeenshire Museums Discovery Centre (0.5 miles north-west). Green spaces nearby include Skelmuir Hill and Pitfour Lake.
Fire rated sealant in Mintlaw, done properly
Ordinary silicone or decorators’ caulk in a fire-stopping gap isn’t a fire-rated seal. We cut out the wrong material and reseal with a fire-rated product tested for that kind of gap. We are often asked to deal with old fire sealant that has split or come away and seals cut through by electricians, plumbers or data installers, across linear gaps, pipe & cable gaps and door frames.
Commercial work around smaller Scottish places tends to mean hotels, guest houses, schools and halls rather than offices. All of them have washrooms, kitchens and fire-rated joints that need looking after.
Our work is backed for twelve months, in Mintlaw and everywhere else we cover.
- Location
- Mintlaw (AB42)
- Wider area
- Aberdeenshire
- Guarantee
- One year on every job
- Price
- Quoted before any work starts
- info@mrmastic.co.uk
- Last updated
- 26 October 2026
Also near Mintlaw
Other services in Mintlaw
Landlords, agents and businesses in Mintlaw
For anyone letting property in or around Mintlaw, several properties can go on one quote. Just tell us the addresses and what each one needs, and pictures by email help.
Housing providers, facilities teams and property managers book us too. We can quote a run of properties together, and we are fully insured.
Honest limits
In fairness, there are a few things sealant won’t fix:
- Large holes that need a different fire-stopping system
- Problems with the door itself rather than the gap around the frame
- A wall that is not a fire-resisting element to begin with
Not sure which it is? You can email us at info@mrmastic.co.uk and we’ll tell you honestly.
Where we work in Mintlaw
- Flats & HMOs
- Door frames
- Plasterboard & masonry
- Pipe & cable gaps
- Linear gaps
- Service penetrations
How the visit works
There’s no need to move everything out before we come, just the space around the work. Everything nearby is protected, and the job takes anything from a few hours to several days, depending on how many gaps there are for a typical job. Outdoor work around Mintlaw depends on the weather, as sealant needs a dry surface, so an outdoor job can move if the forecast changes. Indoor work goes ahead whatever the weather.
- Before starting, we go through the specification or action list with you.
- We measure every gap and note what it’s in and what passes through.
- Unsuitable material such as ordinary foam or silicone is cut out and the faces cleaned.
- We fit backing where needed and apply the fire-rated sealant to depth.
- We hand over a list of locations and products for your records.
Before we arrive
- For indoor joints, keep the area dry beforehand if you can
- Keep pets and children clear of the area while we work
- Move anything stored near the joints
Get a quote
Need a quote? Please send an email to info@mrmastic.co.uk and tell us about the job. We will explain what we’d do and give you a clear quote before we start.
Advice
Quotes for fire rated sealant in Mintlaw
Jobs vary more than people expect. The main factors:
- How easy the joints are to reach
- The old material and how stubborn it is
- The number and length of the joints
- The product the joint needs
Leaving a failed joint generally makes the job bigger, not smaller, because water and mould keep working on it. If you are unsure, drop us a line at info@mrmastic.co.uk and we will give you an honest view and a quote.
What to tell us for a quote
There’s no need for technical detail. It helps if you can tell us:
- Whether it’s a home or a business
- A few pictures by email, if you can
- Where the job is, and your postcode
- How many joints, rooms or windows are involved
For a quote, email us at info@mrmastic.co.uk and tell us where the job is and what the problem looks like. We’ll give you a clear price before any work starts.
Keeping the joints in good condition
Joint life depends on how it’s used and looked after. Here’s what we suggest:
- Take pictures of fire stopping before ceilings or boxing go back
- Look in service cupboards and ceiling voids from time to time
- Don’t paint over fire sealant until it has cured
- Store the list of sealed gaps with your building paperwork
Tell other trades that the gaps have been sealed, and make sure anything they disturb is resealed with a suitable product. A lot of damaged fire stopping comes from later work.
An open gap is not only a fire issue: noise, draughts and even pests can come through too. Dealing with them early helps with all of these.
Leave it or put it right?
Leaving a gap until a refurbishment comes round can mean years with it open. Sealing the gap now is a contained job on its own. Around Mintlaw, water from a failed joint in an older stone home can soak into timber and plaster, which is a far bigger job than the sealant.
Commercial jobs are quoted on the same basis as homes: the amount of work, how we reach it and what it needs. Ask us for a quote and we’ll explain what it covers.
What you get with us
- We’re fully insured
- We never seal over old sealant
- Neat joints and a tidy finish
- An ARBOMaster approved applicator
Take a look at how sealant jobs are priced and what customers say.
Do you need fire rated sealant in Mintlaw?
Gaps around door frames are easily missed. The architrave hides the gap between frame and wall, so it can be left open when a door is replaced.
These are the problems we are asked about most:
- Seals cut through by electricians, plumbers or data installers
- Gaps filled with a product that is not fire-rated
- Cracked or shrunken fire-rated sealant
- Gaps flagged on a fire risk assessment
If you look after a building such as Mintlaw Academy, fire-stopping around service openings should be restored whenever new services go in.
Before you book anyone
- What preparation is included
- Who does the work, and how experienced they are
- Are they insured?
- How the colour is chosen
Mintlaw: your questions answered
Are the rules for fire-rated sealant different in Scotland?
Building work in Scotland comes under the Building (Scotland) Regulations and their technical handbooks. Whatever the rules, fire-rated sealant has to be installed to the manufacturer’s tested details, and that is how we fit it. We don’t certify buildings or do fire risk assessments; your assessor or building control can tell you what’s required.
Is Mintlaw in your area for fire rated sealant?
Yes, Mintlaw is within the area we cover. We work across all of Scotland. Just email us at info@mrmastic.co.uk with a few details of the job.
Do you carry out fire risk assessments?
No. We follow the requirements from your assessor, designer or building control, and apply each product to its tested details.
Can you do several jobs on one visit?
Yes. Tell us about everything you’d like done and you’ll get one quote.
How long will you be here?
As a guide, most jobs take anything from a few hours to several days, depending on how many gaps there are. Larger jobs naturally take longer, and we will say how long yours will take.
Does someone need to be in?
If the work is inside, we need someone to let us in. Once we’ve agreed the job, you don’t need to watch us work.
What should I tell you?
Just the basics: the address or postcode, what’s wrong and any access issues. After that, simply drop us a line at info@mrmastic.co.uk.
What sealant do you use?
We choose the sealant for the joint, not the other way round. Where it moves, gets wet or faces the weather makes a difference, and we will explain our choice.