Aberdeenshire · Scotland
Kirkton of Craig Fire Rated Sealant
Fire rated sealant for Kirkton of Craig and the surrounding area: the right sealant, proper preparation and a neat finish. Ask us for a quick quote.
- Open joints along the top of partitions
- Ordinary sealant used where a fire-rated product was needed
- Fire stopping disturbed by later work
How we quote for fire rated sealant
For a quick quote, just ask. What matters most is:
- Mould in or behind the old joints
- Whether old sealant or filler has to be cut out
- The amount of work
- How many rooms, windows or areas are involved
No two jobs are quite the same, so each one gets its own quote. Size, access and the product the joint needs all make a difference.
Helping us quote
To help us quote quickly, please include:
- The type of property
- A few photos by email, if you can
- How we’d reach the joints
- The problem you’ve noticed
Want a quote for fire rated sealant? Please send an email to info@mrmastic.co.uk and tell us about the job. You’ll know what we plan to do, and what it will cost, before any work begins.
About our fire rated sealant in Kirkton of Craig
Deciding which gaps need fire stopping isn’t our role; that comes from your fire risk assessor, designer or building control. What we do is apply the right product to that specification, properly and neatly. If you have gaps where walls meet ceilings or slabs and joints picked up in a fire-stopping survey, we can help, on pipe & cable gaps, plasterboard & masonry and linear gaps alike.
If you look after holiday lets, a guest house or a community building in or near Kirkton of Craig, washroom and kitchen sealant and any fire-rated joints need the same attention as anywhere.
Each job carries a 12-month guarantee, large or small.
- Where
- Kirkton of Craig (DD10)
- Wider area
- Aberdeenshire
- Cover
- 12 months on all our work
- Quotes
- A clear price before we start
- info@mrmastic.co.uk
- Last updated
- 26 October 2026

Commercial buildings in Kirkton of Craig
If you run a hotel, guest house or holiday let in a coastal place like Kirkton of Craig, heavy use in the busy months is hard on washroom and kitchen sealant, and any building work there should leave fire-rated joints made good. In Scotland, building work comes under the Building (Scotland) Regulations and their technical handbooks. Fire-rated sealant is installed to the manufacturer’s tested details; we do not certify buildings or carry out fire risk assessments.
Community buildings like Church are part of the picture too: service openings in its walls need the right fire-rated sealant, as in any building. Schools such as Montrose Academy are buildings too, and fire-stopping around service openings should be restored whenever new services go in. If you let a flat or house near Montrose station, any gap left by new services in shared walls should be closed with a fire-rated product.
Kirkton of Craig is about 2 miles south of Montrose, in Aberdeenshire. Whether you are in the middle of Kirkton of Craig or further out, fire rated sealant is available for homes and businesses alike. Across Aberdeenshire, we cover 161 places, Kirkton of Craig among them. For nearby work, see our Dundee page.
All of DD10 is covered for fire rated sealant. Other places close to Kirkton of Craig include Ferryden (1 mile north-east), Montrose (2 miles north), Hillside (4 miles north), Inverkeilor (5 miles south-west) and Craigo (6 miles north). We also work in nearby towns such as Laurencekirk (10 miles north), Inverbervie (13 miles north-east) and Johnshaven (9 miles north-east).
What’s near Kirkton of Craig
The closest station to Kirkton of Craig is Montrose station, about 1.5 miles north of the centre. Other landmarks nearby include Montrose Museum (1.5 miles north-east) and Dunninald Castle (0.9 miles south). Green spaces nearby include Duns Dish and Montrose Basin.
Why deal with it now?
Waiting for the next refit can leave a gap open for years. Sealing the gap now is a contained job on its own and needn’t wait for anything else. When the nearest tradesperson is a drive away, it’s tempting to leave a small leak, but water through a failed joint keeps working away until it’s fixed.
The cost reflects the work involved, not guesswork. That’s why we ask about the job first and agree the price before starting.
Why choose Mr Mastic in Kirkton of Craig
- Every job guaranteed for a year
- Fully insured
- Rated 4.9 stars on Google
- Sanitary silicone with an anti-fungal additive in wet areas
Read what affects the cost or what customers say.
Surface by surface
Flats and HMOs
Conversions generally leave a mix of old and new service holes. We seal the ones on your specification with a tested product and record where they are.
Plasterboard walls
We check that the board around the gap is sound. Loose material is removed so the sealant has a firm edge.
Other services in Kirkton of Craig
Can I do it myself?
A careful DIYer can reseal a simple joint, like a short, easy-to-reach joint indoors. The common mistakes are sealing over old sealant, sealing a damp joint and using far too much.
Sealing over old silicone is the commonest DIY error. Silicone doesn’t stick to old silicone, so it lifts and traps water and mould underneath. Everything old must be removed first.
Your questions about fire rated sealant in Kirkton of Craig
How do Scotland’s building regulations apply to fire-rated sealant in Kirkton of Craig?
Building work in Scotland comes under the Building (Scotland) Regulations and their technical handbooks. Whatever the rules, fire-rated sealant has to be installed to the manufacturer’s tested details, and that’s how we fit it. We do not certify buildings or do fire risk assessments; your assessor or building control can tell you what’s required.
I let a flat near Montrose station. Can you help?
Yes. We work for landlords and agents as well as householders. Just send an email to info@mrmastic.co.uk with the address and what needs doing, and we will give you a clear quote.
Does someone need to be in?
If the work is inside, we need someone to let us in. Once we’ve agreed the job, you do not need to watch us work.
Do the sealants smell?
Possibly a little. Any smell clears as the sealant cures.
Is the work guaranteed?
Yes: twelve months. If there’s a problem with our work in that time, tell us and we will put it right.
Where is Mr Mastic based?
Our base is in Crawley, and we work across South East England, London and Scotland.
What’s the difference between intumescent and fire-rated sealant?
An intumescent sealant expands when it gets hot to help seal the gap. Intumescent sealants are one kind of fire-rated sealant; which product suits depends on the gap, the substrate and the service.
Do you provide details of the products used?
Yes. We record the locations we have sealed and the products used to keep with your fire safety documents.
How the visit works
Our applicators work methodically: protection first, then preparation, sealing and a tidy-up. Typically it takes a few hours for a handful of gaps, and longer for a whole building. Outdoor work around Kirkton of Craig depends on the weather, as sealant needs a dry surface, so external jobs may need to move if the day turns wet. Indoor work goes ahead whatever the weather.
- We go through the gaps on your list or survey and check each one’s size and substrate.
- We remove any old or unsuitable filler and clean the gap.
- We put in whatever backing or fill the product detail specifies.
- We apply the fire-rated or intumescent sealant to the specified depth and tool it.
- Locations and products are noted so you have them on file.
Preparing for the visit
- Keep pets and children clear of the area while we work
- Clear the area around the work
- On commercial sites, let us know about site rules
How to get a quote
For a quote, drop us a line at info@mrmastic.co.uk with the location and a short description of the problem. You will have a clear quote before we start.
Read more
Aftercare tips
Aftercare is simple, and it makes a real difference:
- Photograph sealed gaps before they’re covered up
- Tell trades working in the building that fire seals must be put back
- Plan fire stopping into any work that goes through walls or floors
- Include hidden areas like risers in routine checks
Don’t add foam, filler or ordinary sealant over a fire seal. If it needs repair, use the same type of product. We can tell you which product we used.
A flagged gap shouldn’t wait for the next assessment. Have it sealed, then keep the record so the item can be closed.
Work for landlords, hotels and businesses
Businesses can book us for washrooms, kitchens, offices and more. For commercial premises, we can talk through working times when we quote.
Letting agents often deal with us directly. Tell us the address, the job and how access works.
