Greater London · England
Fire-rated sealant in Kensal Town, Greater London
Problem with your fire-stopping gaps in Kensal Town? We remove the old material, prepare the joints and seal them properly, and the work is guaranteed for a year.
- Damaged fire sealant left by other trades
- Sealant items on a fire risk assessment action list
- Open gaps behind door architraves
About our fire rated sealant in Kensal Town
A gap around a door frame, a linear joint at the head of a wall and a hole round a pipe are each sealed differently. Measuring the gap and checking what it’s made of comes first, then apply it to the depth its tested detail calls for. We work on door frames, plasterboard & masonry and service penetrations, and the jobs we see most are standard silicone or caulk in a fire-stopping gap and open joints along the top of partitions.
In London’s blocks of flats, service risers and common parts have pipes and cables passing through walls and floors. For managing agents and building owners in Kensal Town, that can mean fire-rated sealant around service openings as well as resealing in shared washrooms and kitchens.
A 12-month guarantee comes as standard.
- Where
- Kensal Town (W10, W9, W11)
- Wider area
- Greater London
- Cover
- 12 months on all our work
- Quotes
- A clear price before work begins
- Phone
- 0345 464 0079
- Page updated
- 26 October 2026
Different surfaces, different methods
Service penetrations
A copper pipe, a cable and a plastic pipe can all need different fire-stopping details. Each one is sealed to the product’s tested detail, and tell you if sealant alone isn’t the right fix.
Masonry and concrete
Preparation counts on brick, block and concrete. We brush and vacuum the gap and use backing where the detail needs it before the sealant goes in.
Honest limits
We’d rather tell you now than do work that won’t last, so here’s what sealant cannot put right:
- Issuing a fire rating or certificate for a building
- Walls or floors that weren’t built to resist fire
- Fire risk assessments, which need a qualified assessor
If you’re not sure, just call 0345 464 0079 or send us an email and we’ll give you a straight answer.
Where we work in Kensal Town
- Linear gaps
- Flats & HMOs
- Pipe & cable gaps
- Door frames
- Plasterboard & masonry
- Service penetrations
Places near Kensal Town
Also in Kensal Town
Keeping the joints in good condition
So the new joints stay in good condition:
- Keep pictures of seals that will be hidden
- Get damaged fire seals looked at promptly
- Allow for resealing whenever new services are run
- Store the list of sealed gaps with your building paperwork
Look at the sealed gaps as part of your routine walk-rounds. Watch for cracking, gaps or seals that have been disturbed and have them put right.
Any job that breaks through a wall or ceiling should include resealing. Doing it at the time avoids leaving gaps behind.
What fire rated sealant looks like in Kensal Town
Many London buildings have tight access and loading restrictions, and out-of-hours working is possible to arrange. Kensal Town has hotels and guest accommodation in and around it. Hotel work can be planned room by room, with out-of-hours working where needed.
Letting a property close to Queens Park (London) station? Then any gap left by new services in shared walls should be closed with a fire-rated product. For buildings such as St Thomas Kensal Town, older buildings that have had new heating or wiring often have service gaps worth checking.
Kensal Town is about 2 miles north of Kensington, in Greater London. Across the W10 area, we can carry out fire rated sealant at your property. Kensal Town is one of 764 places in Greater London where we work for fire rated sealant.
We work across W10, W9 and W11 for fire rated sealant and the streets around it. You will find streets such as Peach Road, Parry Road and Barlby Road. Kensal Town sits on or near the A4207, so getting to you is simple. If you’re just outside Kensal Town, we cover North Kensington (1 mile west), Notting Dale (1 mile south), Kensal Rise (1 mile north-west), Queen's Park (1 mile north-east) and Kensal Green (1 mile north-west). Further out, we also cover London (5 miles east), City of Westminster (3 miles east), Marylebone (3 miles east), St Pancras (4 miles east), Shoreditch (6 miles east) and Walthamstow (9 miles north-east).
Landmarks near Kensal Town
We work in homes and buildings around All Saints Catholic College, Emslie Horniman's Pleasance and Maida Vale School, among other places. For rail, the closest station is Queens Park (London) station, roughly 0.7 miles north. Other landmarks nearby include Westfield London (1.2 miles south-west) and Paddington General Hospital (0.5 miles east). Not far away are Campden Hill and Greville Place nature reserve.
Your questions about fire rated sealant in Kensal Town
Do you take on hotel work around Kensal Town?
Yes, we work for hotels as well as homes and businesses. Rooms can be done a few at a time, so the building stays open.
Can parking be tricky for a visit in Kensal Town?
Parking in Kensal Town, as in most of London, takes a little planning: a visitor permit or a bay close to the door helps a lot.
Can you give us a record of the work?
Yes. When the job is done, we give you the locations and products. If you need pictures or a set layout, ask when you get a quote.
Do you offer different sealant colours?
Yes. Sealants come in white, clear, grey and other colours, and we agree the colour with you before any work starts.
Do you take out the old sealant first?
Yes. All of the old material is cut out and the joint cleaned before applying anything new.
Do you come to Kensal Town?
We do. Kensal Town is part of the area we cover, and the service is the same as everywhere else.
Can you fill the gap behind a fire door frame?
Yes, where the gap suits a sealant detail. Our work is the gap around the frame, and we will mention anything we notice about the door.
Can I do it myself?
That depends on the joint. High-level, external movement and fire-rated joints are professional jobs, while a short indoor joint may be within reach.
How it works
Good joint work is mostly preparation, so that is where we spend the time. Every joint is cleaned and dried before new material goes in. All told, the work takes anything from a few hours to several days, depending on how many gaps there are. In Kensal Town, flats, stairs and shared entrances are part of the routine. If the building has a concierge, managing agent or access rules, tell us when you book.
- We plan the order of work and access, floor by floor or flat by flat.
- Old, damaged or unsuitable sealant is removed.
- Dust and loose debris are cleaned from each gap.
- We apply and tool the sealant to the product’s tested detail.
- We record what was done and flag anything that needs a different system.
Preparing for the visit
- Try not to wet indoor joints just before the visit
- Clear items away from the joints we’re working on
- Mention any tricky access
Getting a quote
A good description makes for an accurate quote. Tell us where the job is, what’s wrong and how much there is.
Related advice
DIY versus a professional finish
What a professional job adds is preparation and the right product. Joints are cleaned back to sound surfaces and dried, and the sealant is chosen for how the joint moves and where it is, and the work is guaranteed for a year.
Too much sealant is as bad as too little. A heavy bead looks messy and copes badly with movement, and getting the depth right matters as much as the look.
When to call us in Kensal Town
Lots of unsealed gaps appear long after the building was completed. New cables, pipes and data runs go through walls and ceilings and the hole round the new service isn’t always sealed again.
Look out for these signs:
- Gaps flagged on a fire risk assessment
- Seals cut through by electricians, plumbers or data installers
- New service routes left unsealed after building work
- Unsealed gaps where pipes and cables go through a wall
Managing a site like St Thomas' CofE Primary School? Then gaps opened by contractors for new cabling are a common finding in schools and offices.
What your quote should include
- Which sealant they’ll use, and why
- When the joint can take water or movement
- What preparation is included
- Whether you can choose the colour
What affects the cost of fire rated sealant
Your quote is based on your job. We take into account:
- How much old sealant there is and how hard it is to remove
- When we can work, for business premises
- The type of sealant required
- How many areas need sealing
The cost depends on the size of the job, how much old material has to come out and access to the work. You’ll have a clear quote before any work starts.
Helping us quote
Photos by email are helpful but not essential. Please mention:
- Where the job is, and your postcode
- The problem you’ve noticed
- Whether it’s a home or a business
- A few photos by email, if you can
Call for a quick quote, or email us if that’s easier. Describe what needs sealing and we’ll talk you through the work.