Greater London · England
Fire-rated sealant in Queen's Park, Greater London
Fire rated sealant across Queen's Park and nearby, with every bit of old sealant taken out first.
- Seals cut through by electricians, plumbers or data installers
- Unsealed gaps where pipes and cables go through a wall
- Open gaps behind door architraves
Keeping the joints in good condition
So the new joints stay in good condition:
- Store the list of sealed gaps with your building paperwork
- Flag any open gap you spot round a pipe or cable
- Check whether a sealant can be painted before decorating over it
- Take photos of fire stopping before ceilings or boxing go back
Let contractors know where fire stopping has been done, and ask them to reseal anything they cut through. A lot of damaged fire stopping comes from later work.
Open gaps do not only matter in a fire: they also let noise, draughts and sometimes pests through. Dealing with them early helps with all of these.
Fire rated sealant for homes and businesses in Queen's Park
We don’t assess buildings or decide what fire stopping is needed; that comes from your fire risk assessor, designer or building control. Our part is applying the specified sealant carefully, to the right depth and with the right backing. We work on door frames, linear gaps and flats & HMOs, and people most often call us about open gaps behind door architraves and ordinary sealant used where a fire-rated product was needed.
London’s offices, shops, hotels, student accommodation and blocks of flats all have joints to look after, whether that’s washroom resealing or fire-rated sealant around service openings. Where a building in Queen's Park needs to stay open, work can be planned outside normal hours.
Each job carries a 12-month guarantee.
- Place
- Queen's Park (NW6, W9, W10)
- Region
- Greater London
- Guarantee
- 12 months on all our work
- Quotes
- A clear quote up front
- Telephone
- 0345 464 0079
- Page updated
- 26 October 2026
What the job involves on each surface
Linear gaps
Head-of-wall gaps are often hidden above suspended ceilings. We seal them along their full length leaving no stretch unsealed.
Door frames
We deal with the gap around the frame, not the door. The door leaf, its seals and closer need a door specialist and we’ll mention anything we notice.
What sealant work cannot fix
To be straight with you, there are a few things sealant won’t fix:
- Problems with the door itself rather than the gap around the frame
- Sign-off of the building, which sits with building control or your assessor
- Assessing a building’s fire safety
If you are not sure, just phone 0345 464 0079 or email us and we will give you a straight answer.
Surfaces we seal
- Service penetrations
- Door frames
- Flats & HMOs
- Linear gaps
- Pipe & cable gaps
- Plasterboard & masonry
Towns and villages near Queen's Park
What else we do in Queen's Park
When to call us in Queen's Park
Much fire stopping is hidden: above ceilings, inside risers and behind panels. Out of view, damage sits unnoticed until someone inspects.
Signs it’s time to call us include:
- Gaps left after a refit or conversion
- Open gaps behind door architraves
- Standard silicone or caulk in a fire-stopping gap
- Cracked or shrunken fire-rated sealant
Community buildings like West Kilburn Baptist Church are part of the picture too: service openings in its walls need the right fire-rated sealant, as in any building.
What to look for in a quote
- How the joint is cleaned and prepared
- Who does the work, and how experienced they are
- Is the old sealant removed completely?
- How hidden problems are handled
DIY versus a professional finish
What a professional job adds is preparation and the right product. We take joints back to clean, dry surfaces, and the sealant is matched to the joint and its conditions.
Not every job suits DIY: high-level joints, fire-rated gaps, external movement joints and big jobs need the right product, the right access and the right method.
Landlords, agents and businesses in Queen's Park
We also work for businesses, from offices to washrooms and kitchens. On commercial sites, working times can be discussed when we quote.
If you manage several properties in or around Queen's Park, several properties can be quoted together. Just tell us the addresses and what each one needs, and pictures by email help.
How it works
When we arrive, we start by going over the job with you. Surfaces next to the work are protected before any work begins. Most jobs take a few hours for a handful of gaps, and longer for a whole building. In a London area like Queen's Park, the main things to plan are parking and access: tell us about permits, visitor bays or off-street space, which floor we’re working on and whether there’s a lift.
- Before starting, we go through the specification or action list with you.
- We measure every gap and note what it’s in and what passes through.
- Unsuitable material such as ordinary foam or silicone is cut out.
- We fit backing where needed and apply the fire-rated sealant to depth.
- Every location is recorded with the product used for your records.
Before we arrive
- Mention any parking rules near the property
- Tell us about any water getting in
- Keep pets and children clear of the area while we work
Getting a quote
It all starts with a short chat. Describe the problem, the location and the size of the job, and we’ll talk you through what we’d do. When it suits you, call 0345 464 0079 or send us an email.
Advice
Fire rated sealant in Queen's Park: local notes
There are hotels and other places to stay in and around Queen's Park. For hotels, a room-by-room programme keeps most rooms in use while the work goes on. Workplaces and the common parts of blocks of flats in England need a fire risk assessment under the Regulatory Reform (Fire Safety) Order 2005, and gaps around services are often picked up there. We work to the specification you’re given, installing the product to its tested details.
Queen's Park is in London, so parking needs planning: let us know about parking bays, permits or a driveway. For landlords with property near Queens Park (London) station, any gap left by new services in shared walls should be closed with a fire-rated product.
Queen's Park is about 2 miles south-west of Hampstead, in Greater London. Jobs in Queen's Park get the same care as everywhere else we work: old sealant removed completely, careful preparation and a one-year guarantee. We cover 764 towns and villages across Greater London.
Jobs for fire rated sealant in NW6, W9 and W10 works the same way as everywhere else we cover. Local streets include Kempe Road, Peach Road and Parry Road, and we cover them all. If you’re just outside Queen's Park, we cover Kilburn (1 mile north), Kensal Rise (1 mile west), Kensal Town (1 mile south-west), Brondesbury (1 mile north) and Kensal Green (1 mile west). We also work in nearby towns such as London (5 miles south-east), City of Westminster (3 miles south-east), Marylebone (3 miles south-east), St Pancras (4 miles east), Shoreditch (5 miles east) and Walthamstow (9 miles north-east).
What’s near Queen's Park
In Queen's Park, that means homes and buildings near Queen’s Park, Maida Vale School and St Augustine's Church of England High School, among other places. Queen's Park has its own railway station: Queens Park (London) station. Well-known places in the area include Montfichet's Tower (4.6 miles east) and O2 Centre (1.3 miles north-east). Open spaces near Queen's Park include Greville Place nature reserve and Primrose Hill.
Questions from Queen's Park
Can you help a landlord with a rental near Queens Park (London) station?
Yes, we work for landlords and agents. You can phone 0345 464 0079 or drop us an email with the address and a few details, and we will give you a fixed price before we start.
Do you take on hotel work around Queen's Park?
Yes. Hotel and guest-house work is part of what we do. Jobs can be programmed room by room, with out-of-hours working possible to arrange.
Do you work in Queen's Park?
Yes, we do. Queen's Park is part of the area we cover, and the service is the same as everywhere else.
Will it make a mess?
Very little: the area around the joints is protected first, and we tidy up before we go.
Where do you work from?
Mr Mastic is based in Crawley. We cover Queen's Park and the rest of Greater London, along with the rest of our area.
Which products do you use?
Each joint gets the product that suits it. Where it moves, gets wet or faces the weather makes a difference, and we’ll explain our choice.
How do I get a quote for fire rated sealant in Queen's Park?
There’s no set price, as it depends on the job: its size, the old material, access and the product needed. We agree the price before any work begins.
Is it worth trying it myself?
Some simple jobs can be done by a careful DIYer. The usual mistakes are sealing over old sealant, sealing a damp joint and using too much.