North Lanarkshire · Scotland
Fire-rated sealant in Hareshaw, North Lanarkshire
We cover Hareshaw for intumescent and fire-rated sealant around gaps, frames and service penetrations. Old material cut out, joints cleaned and sealed neatly.
- Sealant items on a fire risk assessment action list
- Ordinary sealant used where a fire-rated product was needed
- Fire stopping disturbed by later work
Honest limits
We’d rather tell you now than do work that won’t last, so here’s what sealant cannot put right:
- A wall that is not a fire-resisting element to begin with
- Certifying a building or signing off its fire safety
- Fire risk assessments, which need a qualified assessor
If in doubt, send an email to info@mrmastic.co.uk and we’ll say what we think.
Surfaces we seal
- Flats & HMOs
- Plasterboard & masonry
- Door frames
- Linear gaps
- Pipe & cable gaps
- Service penetrations
Fire rated sealant for homes and businesses in Hareshaw
Fire stopping only performs as intended if it’s done to the detail: the right depth, the right backing and the right product for the substrate. That is the part we focus on. We work on flats & HMOs, pipe & cable gaps and linear gaps, and people most often call us about new service routes left unsealed after building work and fire stopping disturbed by later work.
In a smaller place like Hareshaw, commercial jobs are more likely to be a hotel, guest house, school, surgery or community hall than an office block. Each needs sound sealant in its washrooms and kitchens, and fire-rated joints kept in good order.
All our work is covered by our 12-month guarantee.
- Where
- Hareshaw (ML1)
- Wider area
- North Lanarkshire
- Guarantee
- 12 months on all our work
- Quotes
- Quoted before any work starts
- info@mrmastic.co.uk
- Page updated
- 26 October 2026
Surface by surface
Door frames
The gap between a door frame and the wall around it needs sealing as well as the door itself. We seal that gap with a fire-rated sealant suited to the frame and wall.
Linear gaps
A linear joint may need to allow for movement as well as fire. We choose a product and depth that suit the gap and the movement from the manufacturer’s details.
Work for landlords, hotels and businesses
From a single let to a portfolio, the work is the same standard: the old material taken out, careful preparation and a 12-month guarantee.
Water getting past a failed joint can damage the building, which is a bigger problem in a rented property. Keeping joints in good order is simple maintenance that we can handle for you.
Aftercare tips
Good habits help new joints last longer. A few tips:
- Do not paint over fire sealant until it has cured
- Get damaged fire seals looked at promptly
- Never patch a fire seal with standard sealant
- Check risers, ceiling voids and cupboards during building checks
Any fire seal that’s cut or drilled needs resealing to its tested detail. New services through a sealed wall should include fire stopping in the plan.
A gap left open in a fire-resisting wall or floor lets smoke spread in ways the building wasn’t designed for. Sealing it early is a simple step to take.
Also near Hareshaw
More services for Hareshaw
What happens on the day
The work is kept neat and contained to the joints we are treating, so you can carry on as normal. The job normally takes anything from a few hours to several days, depending on how many gaps there are. For a place like Hareshaw, longer drives are planned in advance. Tell us about tracks, gates, a ferry crossing or anything unusual about getting there.
- First we work through your list or survey, measuring each gap and checking what it’s formed in.
- Old or unsuitable sealant is cut out and the gap cleaned.
- We put in whatever backing or fill the product detail specifies.
- Fire-rated or intumescent sealant is applied to the right depth and tooled.
- Locations and products are noted so you have them on file.
Preparing for the visit
- Let us know about stairs, lifts or work at height
- Tell us about any previous sealing or DIY attempts
- Plan for the work area to be out of bounds to pets and children
Ask for a quote
It all starts with a short chat. Describe the problem, the location and the size of the job, and we’ll talk you through what we’d do. Whenever you are ready, send an email to info@mrmastic.co.uk.
Advice
What fire rated sealant looks like in Hareshaw
In Scotland, building work comes under the Building (Scotland) Regulations and their technical handbooks. We install fire-rated sealant to the product’s tested details; we do not certify buildings or carry out fire risk assessments.
For site and facilities teams at buildings such as Brannock High School, gaps opened by contractors for new cabling are a common finding in schools and offices. If you let a flat or house near Cleland station, any gap left by new services in shared walls should be closed with a fire-rated product.
Hareshaw is about 4 miles north of Wishaw, in North Lanarkshire. Every kind of property in Hareshaw is covered for fire rated sealant. Every job comes with our one-year guarantee. Our North Lanarkshire coverage runs to 89 places, Hareshaw among them. You can also see our page for Glasgow, about 15 miles away.
All of ML1 is covered for fire rated sealant. Fire rated sealant is available to properties on Wilsons Road and Hareshaw Road. If you are just outside Hareshaw, we cover Biggar Road (1 mile south-west), Newarthill (1 mile south-west), Cleland (2 miles south), Chapelhall (2 miles north-west) and Gartness (3 miles north-west). Further out, we also cover Motherwell (4 miles south-west), Cumbernauld (9 miles north-west), Coatbridge (5 miles west), Airdrie (4 miles north-west), Wishaw (4 miles south) and Bellshill (5 miles west).
Near you in Hareshaw
The closest station to Hareshaw is Cleland station, roughly 1.6 miles south. Nearby you’ll also find Murdostoun Castle (2.4 miles south-east) and Cleland Hospital (1.7 miles south). Open spaces near Hareshaw include Baron's Haugh RSPB Reserve and Allanton House lake.
How we quote for fire rated sealant
Call for a quick quote. What matters most is:
- Which sealant suits the joint
- Any working-time requirements on site
- Whether old sealant or filler has to be cut out
- Whether the work is at height
The cost depends on the amount of work, how hard the old material is to remove and how easy the joints are to reach. You will have a clear quote before any work starts, so you know where you stand.
What we need to know
To help us quote quickly, let us know:
- Whether it’s a home or a business
- The rough size of the job
- Whether it has been sealed before
- Where the property is
Need a quote? Please send an email to info@mrmastic.co.uk with a few details. We’ll explain what we’d do and give you a clear price before we start.
Hareshaw questions
Can you help a landlord with a rental near Cleland station?
Yes. We work for landlords and agents as well as householders. Just drop us a line at info@mrmastic.co.uk with the address and what needs doing, and we will give you a clear price.
Do you cover smaller places like Hareshaw?
Yes, we do. Our work covers the whole of Scotland, and smaller places are part of that. The journey is planned ahead, so it helps to know about access.
Is the work guaranteed?
Yes. Each job is guaranteed for twelve months, large or small.
Where are you based?
We work from Crawley. Our applicators cover Hareshaw, along with the rest of our area.
Will it make a mess?
Not at all. The area is protected while we work and cleaned up afterwards.
Do you certify the fire stopping?
Ratings and certification sit with the product’s test evidence and whoever specified the work. We apply the specified product to the manufacturer’s details and list the locations and products for you.
Do you remove the old sealant?
Yes. Sealing over old sealant is the main reason resealing fails early, so we never do it.
Do the sealants smell?
Possibly a little. It fades as the sealant cures, and ventilation helps.
DIY versus a professional finish
If you’re set on DIY, put the effort into preparation: remove every trace of old sealant, clean and dry the joint, and follow the product’s cure time. If it fails, we can still redo it.
A careful DIYer can reseal a simple joint, like a short, easy-to-reach joint indoors. The common mistakes are sealing over old sealant, sealing a damp joint and using far too much.