Kent · England
Hammill Park Fire Rated Sealant
Fire rated sealant across Hammill Park and nearby, with old sealant always removed completely.
- Unsealed gaps around fire door frames
- Seals cut through by electricians, plumbers or data installers
- Open joints along the top of partitions
Fire rated sealant in Hammill Park
Bigger jobs can be worked through in stages, flat by flat or floor by floor, with each location and product recorded. It gives you a list to keep with the building’s fire safety documents. If you’re dealing with door frames with gaps between frame and wall and fire seals that have cracked with movement, we can help, whatever the surface.
For a small place like Hammill Park, the journey and timings are agreed in advance, so it can be fitted around guests, customers or events where possible.
Whatever the size of the job, you get the same 12-month guarantee in Hammill Park and across Kent.
- Location
- Hammill Park (CT13)
- Wider area
- Kent
- Cover
- A year, on every job
- Price
- Quoted before any work starts
- Telephone
- 0345 464 0079
- Updated
- 26 October 2026
Why act early in Hammill Park
For some gaps, sealant isn’t the right answer and another system is needed. Large holes, cable bundles and plastic pipes can call for batts, collars or wraps. If a gap isn’t suitable for sealant, we’ll tell you. Around Hammill Park, older homes often have timber in their floors and frames, where water from a failed joint can cause rot if it’s left.
The cost reflects the work involved, not a rough estimate. That is why we ask about the job first and agree the price before starting.
Why choose Mr Mastic in Hammill Park
- ARBOMaster approved applicator
- We never seal over old sealant
- Every job guaranteed for a year
- Full insurance on every job
Other services in Hammill Park
DIY sealant or a professional job?
If you are set on DIY, put the effort into preparation: take out all the old sealant, make sure the joint is clean and dry, and give it the full cure time. If it fails, we can still redo it.
Sealing over old silicone is the commonest DIY error. Silicone does not stick to old silicone, so it lifts and traps water and mould underneath. Everything old must be removed first.
Landlords, agents and businesses in Hammill Park
Failed sealant is one of the commonest items on a check-out report. We can quote for more than one property at once.
Housing providers, facilities teams and property managers book us too in Hammill Park and across Kent. We can quote a run of properties together, and we are fully insured.
Your questions about fire rated sealant in Hammill Park
Can you do fire rated sealant in Hammill Park?
Yes. We work across London and the South East, and Hammill Park is part of that. Just phone 0345 464 0079 or send us an email with a few details of the job.
Do you work for landlords with property near Sandwich station?
Yes, landlords and agents are among the people we work for. Just phone 0345 464 0079 or email us with the address and what needs doing, and we will send you a clear quote.
Can you quote for more than one area?
Yes, we can. Several rooms, windows or areas can go on one quote.
Can you work in occupied buildings?
Yes, in flats, HMOs, schools, offices and other buildings, occupied or empty. Tell us how the building is used and we will plan around it.
Can I choose the sealant colour?
In most cases you can choose. We will tell you which colours the right product comes in.
Can you fill the gap behind a fire door frame?
Yes. We often seal open gaps hidden behind the architrave. The door and its fittings are a separate job for a door specialist.
What information do you need?
The location, the problem and the rough size of the job. Photos by email help too.
Are you ARBOMaster approved?
Yes. Mr Mastic is an ARBOMaster approved applicator.
Commercial buildings in Hammill Park
In England, the Regulatory Reform (Fire Safety) Order 2005 requires a fire risk assessment for workplaces and for the common parts of blocks of flats, and gaps around services are often picked up there. We work to the specification you are given, installing the product to its tested details.
Letting a property close to Sandwich station? Then any gap left by new services in shared walls should be closed with a fire-rated product. If you look after a building such as Eastry Church of England Primary School, fire-stopping around service openings should be restored whenever new services go in.
Hammill Park is about 5 miles north-west of Deal, in Kent. Anywhere in CT13, we can carry out fire rated sealant at your property. Our Kent coverage runs to 922 places, and Hammill Park is one of them. We also work in Chelmsford, about 48 miles from Hammill Park.
Here we cover the CT13 postcode area for fire rated sealant. If you need fire rated sealant at a property on Elizabeth Drive and Colliery Lane or anywhere close by, we can help. If you’re just outside Hammill Park, we cover Flemings (1 mile north), Heronden (1 mile south), Barnsole (1 mile north-west), Coombe (1 mile north) and Staple (1 mile north-west). We also work in nearby towns such as Canterbury (9 miles west), Margate (10 miles north-east), Dover (8 miles south), Folkestone (13 miles south-west), Ramsgate (8 miles north-east) and Broadstairs (10 miles north-east).
Around Hammill Park
We work in homes and buildings around Sandwich Technology School, among other places. For rail, the closest station is Sandwich station, about 2.7 miles north-east of the centre. Other landmarks nearby include White Mill (2.6 miles north-east). Green spaces nearby include Monk's Wall nature reserve.
Common problems we fix in Hammill Park
Over time, buildings change layout and use. A house turned into flats or an HMO, or an office split into smaller units, brings new walls, new service routes and new gaps.
The problems people normally mention when they call include:
- Gaps flagged on a fire risk assessment
- Gaps left after a refit or conversion
- Ordinary sealant used where a fire-rated product was needed
- Gaps where walls meet ceilings or slabs
Community buildings like Church of St Mary the Virgin are part of the picture too: older buildings that have had new heating or wiring often have service gaps worth checking.
What your quote should include
- Are they insured?
- What happens if the job turns out different
- Which sealant they’ll use, and why
- Whether all the old sealant comes out first
Aftercare tips
No joint lasts for ever, but care makes a real difference. Our tips:
- Tell trades working in the building that fire seals must be put back
- Ask which product was used before you paint
- Check risers, ceiling voids and cupboards during building checks
- Allow for resealing whenever new services are run
File the record of locations and products with your fire safety paperwork. It helps whoever checks the building next.
An open gap is not only a fire issue: noise, draughts and even pests can come through too. Dealing with them early helps with all of these.
What we can’t put right
In fairness, some problems need a different trade:
- Certifying a building or signing off its fire safety
- Walls or floors that weren’t built to resist fire
- Fire risk assessments, which need a qualified assessor
Not sure which it is? You can phone 0345 464 0079 or drop us an email and we will tell you honestly.
Where we work in Hammill Park
- Flats & HMOs
- Linear gaps
- Service penetrations
- Plasterboard & masonry
- Door frames
- Pipe & cable gaps
What happens on the day
We bring everything the job needs with us, so there’s nothing for you to buy. After a quick look at the joints together, we protect the area and start. Most jobs take anything from a few hours to several days, depending on how many gaps there are. For a village or hamlet like Hammill Park, the journey is planned in advance: tell us about narrow lanes, gates, long drives and where we can park. We bring what the job needs, so it can be finished in one trip where possible.
- We begin by agreeing the list of gaps from your assessor’s or designer’s requirements.
- We measure every gap and note what it’s in and what passes through.
- Unsuitable material such as ordinary foam or silicone is cut out and the faces cleaned.
- We fit backing where needed and apply the fire-rated sealant to depth.
- Every location is recorded with the product used.
Preparing for the visit
- For indoor joints, keep the area dry beforehand if you can
- Let us know about earlier repairs to the joints
- Move anything stored near the joints
Get a quote
Every job is quoted individually, so the first step is telling us about yours. Simply call 0345 464 0079 or send us an email and describe the job.