Surrey · England
Fire Rated Sealant in Frensham
Intumescent and fire-rated sealant around gaps, frames and service penetrations for homeowners, landlords and businesses in Frensham. Fully insured, ARBOMaster approved and guaranteed for a year.
- Seals cut through by electricians, plumbers or data installers
- Open holes round services passing through fire walls
- Gaps where walls meet ceilings or slabs
How it works
Most of a good job is in the preparation, so that is where we spend the time. Joints are cleaned back and dried before anything new goes in. In total, it normally takes a few hours for a handful of gaps, and longer for a whole building. Somewhere like Frensham needs a little journey planning: let us know about lanes, gates and parking. We bring what the job needs, so it can be finished in one trip where possible.
- We start with the survey or action list, checking the size and surfaces of every gap.
- Old or unsuitable sealant is cut out and the gap cleaned.
- Backing or fill is fitted where the product’s tested detail calls for it.
- The sealant goes in to the depth its detail sets, then it’s tooled off.
- Locations and products are noted so you have them on file.
Before we arrive
- Keep pets and children clear of the area while we work
- Let us know if you’ve seen damp or leaks
- Let us know about earlier repairs to the joints
Getting a quote
We do not publish a price list, because every job is different. Instead, we send you a clear quote for your job. To get started, phone 0345 464 0079 or drop us an email.
Read more
Fire rated sealant in Frensham, done properly
Filling a fire-stopping gap with standard silicone or caulk doesn’t make it fire-rated. We cut out the wrong material and reseal with a fire-rated product tested for that kind of gap. We work on service penetrations, plasterboard & masonry and pipe & cable gaps, and people most often call us about gaps around pipes and cables through fire-resisting walls and cracked or shrunken fire-rated sealant.
Somewhere as small as Frensham, commercial jobs tend to be pubs, holiday lets, farm buildings or halls rather than offices. They all have washrooms, kitchens and service openings that need the right sealant.
Our work is backed for twelve months, and the guarantee is the same wherever you are.
- Where
- Frensham (GU10)
- Region
- Surrey
- Cover
- One year on every job
- Price
- Quoted before any work starts
- Call
- 0345 464 0079
- Page updated
- 26 October 2026
Workplaces and buildings in Frensham
In England, the Regulatory Reform (Fire Safety) Order 2005 requires a fire risk assessment for workplaces and for the common parts of blocks of flats, which is often where open fire-stopping gaps are first noticed. We apply fire-rated sealant to the assessor’s or designer’s specification and the product’s tested details.
Community buildings like Church of St Mary the Virgin are part of the picture too: service openings in its walls need the right fire-rated sealant, as in any building. Managing a site like St Mary's CofE Aided Infant School? Then service openings in fire-resisting walls need checking after any refurbishment.
Frensham is about 3 miles south of Farnham, in Surrey. Frensham gets the same service as everywhere we cover: old sealant removed completely, careful preparation and a one-year guarantee. 395 places in Surrey are on our list, from the larger towns to small villages. There’s also a page for Reading, roughly 21 miles from Frensham.
Our applicators cover all of the GU10 postcode area for fire rated sealant. That includes homes and businesses on The Street and Peakfield and the roads around them. We also cover Millbridge (1 mile north), Shortfield Common (1 mile north), Crosswater (1 mile south-east), Tilford Reeds (2 miles north-east) and Tilford Common (2 miles east). Further out, we also cover Guildford (11 miles north-east), Woking (14 miles north-east), Camberley (12 miles north), Farnham (3 miles north), Frimley (11 miles north) and Haslemere (6 miles south-east).
Landmarks near Frensham
We work in homes and buildings around The Flashes and Edgeborough School. The nearest railway station is Farnham station, about 3.2 miles north. Nearby you’ll also find Farnham Castle (3.6 miles north) and Museum of Farnham (3.3 miles north). Not far away are Culverswell Hill and Farnham Heath.
Should I try it myself first?
A careful DIYer can reseal a simple joint, like a short, easy-to-reach joint indoors. Where it goes wrong is sealing over the old bead, working on a wet joint or overloading the gap.
The biggest DIY mistake is sealing over old sealant. Silicone doesn’t stick to old silicone, so it peels away and traps moisture behind it. Everything old must be removed first.
When something else is needed
We will not take on work that will not last, so here’s what sealant cannot put right:
- Sign-off of the building, which sits with building control or your assessor
- A wall that isn’t a fire-resisting element to begin with
- Large holes that need a different fire-stopping system
Not sure which it is? You can phone 0345 464 0079 or send us an email and we’ll tell you honestly before you book.
Joints and surfaces we work on
- Flats & HMOs
- Pipe & cable gaps
- Service penetrations
- Linear gaps
- Door frames
- Plasterboard & masonry
Frensham questions
Is Frensham in your area for fire rated sealant?
Yes, Frensham is within the area we cover. We work across London and the South East. Just ring 0345 464 0079 or send us an email with a few details of the job, and we will give you a clear price.
I let a flat near Farnham station. Can you help?
Yes. We work for landlords and letting agents as well as homeowners, and several properties can go on one quote. You can call 0345 464 0079 or email us with the details for a clear quote.
Do you certify the fire stopping?
That is not something we state or certify. The requirement comes from your assessor, designer or building control, and we fit a product whose tested details meet it.
How do I get a quote for fire rated sealant in Frensham?
It depends on the job, so we quote each one individually. To get one, ring 0345 464 0079 or email us with a short description of the job.
How long will you be here?
That depends on the amount of work, but most jobs take from a few hours to a few days, depending on the number of gaps and the access. We’ll give you a better idea when we quote.
What should I tell you?
A short description and the location, with pictures by email if possible. If we need more, we will ask.
Do the sealants smell?
There can be a smell while the sealant cures. Opening a window helps.
Will we have a record of what was sealed?
Yes. Locations and products are written up when we finish. If you need pictures or a set layout, ask when you get a quote.
Also in Frensham
Surface by surface
Door frames
Our work is the joint between frame and wall. Doors, seals and closers are for a door specialist and we’ll mention anything we notice.
Service penetrations
Service penetrations are where new gaps often appear. Old or unsuitable filler comes out before the right sealant goes in.
Do you need fire rated sealant in Frensham?
Gaps around door frames are easily missed. The gap between the frame and the wall is hidden behind the architrave, so it’s easy to leave unsealed when doors are changed.
Any of these means the joints need attention:
- Damaged fire sealant left by other trades
- Cracked or shrunken fire-rated sealant
- Gaps left after a refit or conversion
- Unsealed gaps around fire door frames
If you let a flat or house near Farnham station, fire-rated sealant around pipes and cables through walls and floors needs making good whenever new services go through.
Questions to ask before booking
- Whether they’re fully insured
- Whether the sealant suits the joint
- How the surfaces are prepared before sealing
- How hidden problems are handled
Quotes for fire rated sealant in Frensham
The price is agreed before any work begins. It’s based on:
- The product the joint needs
- How many rooms, windows or areas are involved
- Any working-time requirements on site
- The number and length of the joints
Combining jobs into one visit is normally more efficient than separate visits, so it’s worth mentioning everything you’d like done. We’ll send you a clear quote for the lot.
What we need to know
A few details help us give you an accurate quote. When you ask for a quote, tell us:
- Where the job is, and your postcode
- What’s wrong with the joints now
- Any access issues, like height or stairs
- If it’s domestic, commercial or a hotel
A good description makes for an accurate quote. Let us know the location, the problem and roughly how many joints, and email pictures if that’s easy.
Landlords, agents and businesses in Frensham
We also work for property managers and facilities teams in Frensham and across Surrey. Several sites can be quoted together.
From a single let to a portfolio, the work is the same standard: old sealant fully removed, joints prepared properly and a one-year guarantee.