Surrey · England
Fire-rated sealant in Millbridge, Surrey
Fire rated sealant across Millbridge and nearby, with old sealant always removed completely and a 12-month guarantee.
- Joints picked up in a fire-stopping survey
- Old fire sealant that has split or come away
- Holes left by a change of layout
Fire rated sealant for homes and businesses in Millbridge
Filling a fire-stopping gap with standard silicone or caulk does not make it fire-rated. Anything unsuitable comes out first and reseal with a fire-rated product tested for that kind of gap. We work on flats & HMOs, pipe & cable gaps and service penetrations, and the jobs we see most are seals cut through by electricians, plumbers or data installers and gaps where walls meet ceilings or slabs.
Work in a small place like Millbridge is planned ahead, journey included, so the job can fit around bookings, guests or opening times where possible.
There’s a 12-month guarantee on every job, whatever its size.
- Location
- Millbridge (GU10)
- Wider area
- Surrey
- Cover
- 12 months on all our work
- Quotes
- A clear price before we start
- Telephone
- 0345 464 0079
- Last updated
- 26 October 2026
Aftercare tips
How long the joints last depends on use and care. We suggest:
- Include fire stopping when you schedule refits
- Keep pictures of seals that will be hidden
- Store the list of sealed gaps with your building paperwork
- Tell trades working in the building that fire seals must be put back
Leave the sealant to cure fully before painting near it. Not every fire-rated sealant takes paint.
If a fire risk assessment has flagged a gap, don’t leave it for the next one. Get it sealed and recorded.
How the job changes by surface
Plasterboard walls
Service holes in plasterboard are often rough and oversized. Gaps that are too big for sealant alone need a different detail and we’ll flag it.
Linear gaps
Long, narrow gaps appear where walls meet slabs and ceilings. They’re sealed with a fire-rated sealant over backing where the detail calls for it.
Your questions about fire rated sealant in Millbridge
Can you help a landlord with a rental near Farnham station?
Yes, we work for letting agents and landlords. You can phone 0345 464 0079 or send us an email with the address and a few details, and we will give you a fixed price before work begins.
Will you come out to Millbridge?
Yes, we do. Our work covers London and the South East, and smaller places are part of that. The journey is planned ahead, so it helps to know about access.
Do you seal gaps around fire door frames?
Yes. Gaps behind architraves are a common job for us. Doors, seals and closers need a door specialist.
Is the work guaranteed?
Yes, always. There’s a 12-month guarantee on every job, wherever you are.
What sealant do you use?
The product depends on the job: sanitary silicone where it gets wet, and sealants suited to movement or weather elsewhere. We use products from Arbo and Everbuild.
Will you assess my building’s fire safety?
No, assessment isn’t something we do. Once you have a specification or action list from your assessor or designer, we can quote for the fire-rated sealant items.
Do you certify the fire stopping?
We do not give ratings or certificates for our work. The requirement comes from your assessor, designer or building control, and we fit a product whose tested details meet it.
What’s the difference between intumescent and fire-rated sealant?
Intumescent means it swells when heated, helping close the gap. It’s one type of fire-rated sealant; which product suits depends on the gap, the substrate and the service.
Quotes for fire rated sealant in Millbridge
Every job gets its own quote. These are the things that affect it:
- How many areas need sealing
- Which sealant suits the joint
- The number and length of the joints
- Mould in or behind the old joints
What it costs depends on the amount of work, how much old material has to come out and how easy the joints are to reach. You’ll have a clear quote before any work starts.
What to tell us for a quote
What to tell us when you ask for a quote:
- How we’d reach the joints
- Whether it has been sealed before
- What’s wrong with the joints now
- Roughly how big the job is
The more we know about the job, the more useful the quote. Tell us where the job is, what’s wrong and how much there is, and add pictures by email if you can.
Do you need fire rated sealant in Millbridge?
Movement in the structure can open gaps too: cracked or debonded sealant leaves an open route through the wall. Knocks, maintenance and building work damage it further.
Keep an eye out for these signs:
- Seals cut through by electricians, plumbers or data installers
- Gaps flagged on a fire risk assessment
- Open holes round services passing through fire walls
- Fire seals that have cracked with movement
Managing a site like St Mary's CofE Aided Infant School? Then fire-stopping around service openings should be restored whenever new services go in.
Comparing quotes
- What insurance they hold
- What preparation is included
- Is the old sealant removed completely?
- What the cure time is
Fire rated sealant in Millbridge: local notes
Workplaces and the common parts of blocks of flats in England need a fire risk assessment under the Regulatory Reform (Fire Safety) Order 2005, which is often where open fire-stopping gaps are first noticed. We work to the specification you’re given, installing the product to its tested details.
If you let a flat or house near Farnham station, new cables or pipes through a fire-resisting wall leave a gap that needs the right sealant. Community buildings like Church of St Mary the Virgin are part of the picture too: older buildings that have had new heating or wiring often have service gaps worth checking.
Millbridge is about 2 miles south of Farnham, in Surrey. We provide fire rated sealant to householders, landlords and businesses in Millbridge and the surrounding area, as part of our work across Surrey. Our area takes in 395 places across Surrey, large and small. There’s also a page for Reading, about 21 miles away.
Jobs for fire rated sealant in GU10 is quoted and booked the same way as anywhere else. If you need fire rated sealant at a property on Shortfield Common Road, The Reeds Road and Fifield Lane or anywhere close by, we can help. Neighbouring places we cover for fire rated sealant include Shortfield Common (1 mile west), Frensham (1 mile south), Tilford Reeds (1 mile north-east), Lower Bourne (2 miles north) and Tilford Common (2 miles east). Within a short drive, we also cover Guildford (11 miles north-east), Woking (14 miles north-east), Camberley (11 miles north), Frimley (10 miles north), Haslemere (7 miles south-east) and Cranleigh (14 miles east).
Local landmarks in Millbridge
Around Millbridge, our work takes us to homes and buildings near Edgeborough School, Weydon School and Underdown nature reserve and the streets around them. Millbridge’s nearest station is Farnham station, roughly 2.6 miles north. Well-known places in the area include Museum of Farnham (2.7 miles north) and Farnham Castle (3.1 miles north). Open spaces near Millbridge include Culverswell Hill and Farnham Heath.
Towns and villages near Millbridge
What else we do in Millbridge
Landlords, agents and businesses in Millbridge
Failed sealant is one of the commonest items on a check-out report, and it’s easy to sort out between tenants. Several properties can be quoted together.
We regularly work with letting and managing agents. Tell us the address, the job and how access works.
What sealant work can’t fix
A few problems are outside what sealant work can do:
- Problems with the door itself rather than the gap around the frame
- Big openings where sealant alone isn’t the tested solution
- Issuing a fire rating or certificate for a building
Not sure which it is? You can ring 0345 464 0079 or send us an email and we’ll tell you honestly before you book.
Where we work in Millbridge
- Plasterboard & masonry
- Service penetrations
- Door frames
- Flats & HMOs
- Linear gaps
- Pipe & cable gaps
What we do, step by step
A visit follows a simple pattern: we check the joints, mask and protect the surrounding surfaces, carry out the job and tidy away. Most jobs take a few hours for a handful of gaps, and longer for a whole building. Somewhere as small as Millbridge, access is often the only tricky part. For outside work, also let us know about exposed walls and any outbuildings involved.
- First we work through your list or survey, measuring each gap and checking what it’s formed in.
- Old or unsuitable sealant is cut out and the gap cleaned.
- We put in whatever backing or fill the product detail specifies.
- Fire-rated or intumescent sealant is applied to the right depth and tooled.
- Locations and products are noted so you have them on file.
How to prepare
- Move anything stored near the joints
- Mention if the joints have been sealed before
- Where the joints are inside, avoid wetting them before we arrive
Getting a quote
For a quote, call 0345 464 0079 or send us an email with the location and a short description of the problem. We will send you a clear quote before any work starts.