Moray · Scotland
Fire-rated sealant in Findhorn, Moray
Intumescent and fire-rated sealant around gaps, frames and service penetrations in Findhorn, with a 12-month guarantee on every job. Call for a quick quote.
- Unsealed gaps around fire door frames
- Standard silicone or caulk in a fire-stopping gap
- Sealant items on a fire risk assessment action list
Workplaces and buildings in Findhorn
For seaside hotels, guest houses and holiday lets around Findhorn, busy months put washrooms and kitchens under pressure, so it’s worth checking the sealant before the busiest weeks. Scotland has its own building regulations, the Building (Scotland) Regulations, with technical handbooks. We install fire-rated sealant to the product’s tested details, though we do not certify buildings or do fire risk assessments.
Community buildings like Findhorn Parish Church and Church Hall are part of the picture too: gaps around pipes and cables are worth checking after any building work there.
Findhorn is about 4 miles north of Forres, in Moray. Homes, rented property, offices and hotels in Findhorn can book us for fire rated sealant, old or new, large or small. Every job comes with our 12-month guarantee. Our Moray coverage runs to 58 places, and Findhorn is one of them. For nearby work, see our Aberdeen page, about 65 miles away.
Work in IV36 is quoted and booked the same way as anywhere else. Streets in the area include Elvin Place, Cromarty Court and Fyrish Road, and we cover them all. Close by, we work in Kinloss (2 miles south-east), Forres (4 miles south), Red Craig (4 miles south-west), Mundole (5 miles south-west) and Dyke (5 miles south-west). Further out, we also cover Elgin (11 miles east), Lossiemouth (12 miles east), Ashgrove (11 miles east), Burghead (5 miles north-east), Hopeman (7 miles north-east) and Lhanbryde (14 miles east). Remote and island addresses need a little more planning, so tell us where you are when you ask for a quote.
Around Findhorn
Findhorn’s nearest station is Forres station, about 3.2 miles south. Well-known places in the area include Findhorn Heritage Centre (0.5 miles north-west) and Forres Castle (3.3 miles south). Not far away are Sanquhar Loch and Culbin Sandhills.
About our fire rated sealant in Findhorn
A fire seal relies on being installed the way it was tested: correct depth, correct backing and a product suited to the surfaces. That is the part we focus on, gap by gap. We’re often asked to deal with joints picked up in a fire-stopping survey and standard silicone or caulk in a fire-stopping gap, on plasterboard & masonry, pipe & cable gaps and flats & HMOs.
If you look after holiday lets, a guest house or a community building in or near Findhorn, washroom and kitchen sealant and any fire-rated joints need the same attention as anywhere.
You’re covered for a year from the day we finish. If there’s a problem with it, please email us at info@mrmastic.co.uk.
- Location
- Findhorn (IV36)
- Region
- Moray
- Cover
- 12 months on all our work
- Price
- A clear quote up front
- info@mrmastic.co.uk
- Page updated
- 26 October 2026
The process
You do not need to clear the whole room or building before we come, only the area right around the joints. Everything nearby is protected, and the work takes a few hours for a handful of gaps, and longer for a whole building for a typical job. Outdoor work around Findhorn depends on the weather, as sealant needs a dry surface, so external jobs may need to move if the day turns wet. Work indoors isn’t affected.
- We go through the gaps on your list or survey and check each one’s size and substrate.
- We remove any old or unsuitable filler and clean the gap.
- Where the tested detail needs backing or fill, we fit it.
- Fire-rated or intumescent sealant is applied to the right depth and tooled.
- We record the locations and products used for your records.
Before we arrive
- Keep children and pets away from the work area
- Mention any parking rules near the property
- Move anything stored near the joints
How to get a quote
Getting a quote is simple: let us know what needs doing and where. Photos by email help us understand the job, and we’ll take it from there.
Related advice
Also in Findhorn
What we are called out for in Findhorn
Sometimes the wrong product was used from the start: ordinary expanding foam, standard silicone or decorators’ caulk in a place that needed a tested fire seal. It may look fine, but it is not a fire-rated seal.
Keep an eye out for these signs:
- Linear gaps at the head of walls
- Unsealed gaps where pipes and cables go through a wall
- Gaps filled with a product that isn’t fire-rated
- Sealant items on a fire risk assessment action list
If you let a flat or house near Forres station, new cables or pipes through a fire-resisting wall leave a gap that needs the right sealant.
Comparing quotes
- Which sealant they’ll use, and why
- How long to leave it before use
- Whether VAT is included
- How the joint is cleaned and prepared
Work for landlords, hotels and businesses
We also work for businesses, from offices to washrooms and kitchens. On commercial sites, working times can be discussed when we quote.
Housing providers, facilities teams and property managers book us too in Findhorn and across Moray. We can quote a run of properties together.
Quotes for fire rated sealant in Findhorn
You will get a clear quote before work begins. It’s based on:
- Any working-time requirements on site
- Whether old sealant or filler has to be cut out
- The number of rooms or windows
- Which sealant suits the joint
Commercial jobs are quoted on the same basis as homes: the amount of work, the access and the products needed. Ask us for a quote and we will explain what it covers.
Asking for a quote
Photos help, but a description is a good start. Please mention:
- Any access issues, like height or stairs
- The address or postcode of the job
- The rough size of the job
- Whether it’s a home or a business
Call for a quick quote, or send an email if you’d rather. Describe what needs sealing and we’ll talk you through the work before giving you a price.
Common questions in Findhorn
Do you cover smaller places like Findhorn?
Yes, smaller places are covered as well as towns. Our work covers the whole of Scotland. Let us know about access, parking and anything unusual about getting there when you book.
I let a flat near Forres station. Can you help?
Yes, we work for letting agents and landlords. You can drop us a line at info@mrmastic.co.uk with the address and a few details, and we’ll give you a fixed price before we start.
Do you take out the old sealant first?
Yes, always, and completely. New sealant won’t bond properly to old, so the joint is cleaned back first.
Where are you based?
We work from Crawley. We cover Findhorn and the rest of Moray, along with the rest of our area.
Can you tell me how many minutes the seal will last?
Ratings and certification sit with the product’s test evidence and whoever specified the work. We apply the specified product to the manufacturer’s details and giving you a record of where it went.
Do I have to be there?
It depends on the job. Inside work needs someone to give us access, and for outside work we will agree access with you when we book.
Will it make a mess?
We keep the work tidy. We protect what’s around the joints.
Will there be a smell?
Possibly a little. It fades as the sealant cures, and ventilation helps.
Why act early in Findhorn
Doing it once, properly, beats doing it twice. If the details weren’t followed, the seal may need redoing once someone inspects it. Out of town in Scotland, exposed walls take a lot of weather, and once water gets behind a failed joint, damp in stone or harled walls is slow to dry out.
A failed joint rarely gets cheaper to fix by waiting, because water and mould keep working on it. If you are unsure, drop us a line at info@mrmastic.co.uk and we’ll give you an honest view and a quote.
Why choose Mr Mastic in Findhorn
- Domestic, commercial and hotel work
- Approved under the ARBOMaster scheme
- Old sealant always removed completely
- 20+ years of sealant experience
Read what affects the cost or what customers say.
Keeping the joints in good condition
Aftercare is simple, and it makes a real difference:
- Include fire stopping when you schedule refits
- Report cracked or damaged seals as soon as you notice them
- Store the list of sealed gaps with your building paperwork
- Don’t paint over fire sealant until it has cured
Look at the sealed gaps as part of your routine walk-rounds. Look for cracks, gaps or sealant that has been cut or pulled out and get them seen to.
Small gaps around services are simple to deal with while there are only a few. Over time, more work adds more holes.
When something else is needed
In fairness, there are a few things sealant will not fix:
- Certifying a building or signing off its fire safety
- Walls or floors that weren’t built to resist fire
- Fire doors that need new seals, closers or hardware
Not sure which it is? You can drop us a line at info@mrmastic.co.uk and we will tell you honestly before booking.
Surfaces we seal
- Linear gaps
- Door frames
- Plasterboard & masonry
- Flats & HMOs
- Pipe & cable gaps
- Service penetrations