Moray · Scotland
Fire Rated Sealant in Rafford
Fire-stopping gaps in Rafford need attention? We cut out the old, prepare the joints and apply the right sealant.
- Gaps filled with a product that isn’t fire-rated
- Open gaps behind door architraves
- Gaps where walls meet ceilings or slabs
Landlord and commercial work in Rafford
We also work for businesses, from offices to washrooms and kitchens. On commercial sites, working times can be discussed when we quote.
Mouldy or split sealant often shows up at the end of a tenancy, and it’s easy to sort out between tenants. Several properties can be quoted together.
About our fire rated sealant in Rafford
Where services or frames pass through a fire-resisting wall or floor, the gap around them needs a fire-rated seal. Each gap is sealed to the product maker’s tested detail for its size and substrate, with a record of the products and locations if you need one. We work on pipe & cable gaps, plasterboard & masonry and door frames, and the jobs we see most are new service routes left unsealed after building work and ordinary sealant used where a fire-rated product was needed.
For holiday lets, guest houses and community buildings in or near Rafford, the washrooms and kitchens need the same care as any city building, and fire-rated joints should be kept in good order.
Whatever the size of the job, you get the same 12-month guarantee in Rafford and across Moray.
- Place
- Rafford (IV36)
- Wider area
- Moray
- Guarantee
- 12 months on all our work
- Quote
- Quoted before any work starts
- info@mrmastic.co.uk
- Last updated
- 26 October 2026
Surface by surface
Plasterboard walls
Holes in plasterboard are often cut roughly for services. Where a hole is bigger than the sealant’s tested range, it needs another approach.
Linear gaps
Linear gaps run along the head of walls, at floor edges and between panels. We seal them to the tested detail, with backing where it’s needed.
How we quote for fire rated sealant
We don’t publish a price list, because no two jobs are the same. The quote depends on:
- How easy the joints are to reach
- Whether old sealant or filler has to be cut out
- How many rooms, windows or areas are involved
- When we can work, for business premises
A failed joint rarely gets cheaper to fix by waiting, as water and mould keep getting in. If you’re not sure whether it needs doing, drop us a line at info@mrmastic.co.uk and we will give you an honest view and a quote.
What to tell us for a quote
Photos help, but a description is a good start. Please mention:
- If it’s domestic, commercial or a hotel
- Any previous sealing or DIY work
- How many joints, rooms or windows are involved
- How we’d reach the joints
For a quote, email us at info@mrmastic.co.uk and tell us where the job is and what the problem looks like. We will give you a clear price before any work starts.
Why act early in Rafford
Waiting for the next refit can leave a gap open for years. Sealing the gap now is a contained job on its own that doesn’t depend on other work. Exposed walls in smaller Scottish places take a lot of wind and rain, and once water gets behind a failed joint, damp in stone or harled walls is slow to dry out.
Commercial jobs are quoted on the same basis as homes: the amount of work, how we reach it and what it needs, plus any working-time requirements on site. Ask us for a quote and we will explain what it covers.
Why us?
- 20+ years of sealant experience
- Experience in homes, commercial sites and hotels
- We leave the area clean and tidy
- Arbo and Everbuild products
Read what affects the cost or customer reviews.
Honest limits
We’d rather tell you now than do work that will not last, so here’s what sealant can’t put right:
- Openings too large for sealant, which need batts, boards or another system
- Doors that aren’t fire doors in the first place
- Assessing a building’s fire safety
If in doubt, send an email to info@mrmastic.co.uk and we will say what we think.
Joints and surfaces we work on
- Door frames
- Plasterboard & masonry
- Flats & HMOs
- Service penetrations
- Pipe & cable gaps
- Linear gaps
Workplaces and buildings in Rafford
Scotland has its own building regulations, the Building (Scotland) Regulations, with technical handbooks. Fire-rated sealant is installed to the manufacturer’s tested details; we do not certify buildings or carry out fire risk assessments.
For site and facilities teams at buildings such as Forres Academy, service openings in fire-resisting walls need checking after any refurbishment. For landlords with property near Forres station, any gap left by new services in shared walls should be closed with a fire-rated product.
Rafford is about 2 miles south-east of Forres, in Moray. For fire rated sealant in and around Rafford, please drop us a line at info@mrmastic.co.uk for a quick quote. We are based in Crawley and cover Moray, Rafford included. We cover 58 towns and villages across Moray, large and small. You can also see our page for Aberdeen, roughly 62 miles from Rafford.
Jobs for fire rated sealant in IV36 is quoted and booked the same way as anywhere else. Nearby, we also carry out fire rated sealant in Moor of Granary (1 mile south-east), Forres (2 miles north-west), Mundole (3 miles west), Red Craig (3 miles west) and Kinloss (4 miles north). Within a short drive, we also cover Elgin (11 miles north-east), Lossiemouth (14 miles north-east), Ashgrove (11 miles east), Burghead (9 miles north), Hopeman (10 miles north-east) and Lhanbryde (14 miles east). If you’re somewhere remote, a little more planning is needed.
Landmarks near Rafford
The closest station to Rafford is Forres station, roughly 2.6 miles north-west. Other landmarks nearby include Leanchoil Hospital (1.5 miles north-west) and DALLAS DHU HISTORIC DISTILLERY (1.2 miles west). For a walk, there’s Cluny Hill and Sanquhar Loch.
How the visit works
We keep the work tidy and contained to the area we’re working on, so you can carry on as normal. Expect the work to take anything from a few hours to several days, depending on how many gaps there are, and we tell you how long to leave it before we go. For a place like Rafford, longer drives are planned in advance. Mention tracks, gates, ferries or anything else about the route.
- First we work through your list or survey, measuring each gap and checking what it’s formed in.
- Old or unsuitable sealant is cut out and the gap cleaned.
- Where the tested detail needs backing or fill, we fit it.
- We apply the fire-rated or intumescent sealant to the specified depth and tool it.
- Locations and products are noted so you have them on file.
Before we arrive
- Let us know if you’ve seen damp or leaks
- Plan for the work area to be out of bounds to pets and children
- For indoor joints, keep the area dry beforehand if you can
Getting a quote
For fire rated sealant in Rafford, send an email to info@mrmastic.co.uk. A short description of the job and where it is helps us quote, and you will get a clear quote before work begins.
Advice
Other services in Rafford
Your questions about fire rated sealant in Rafford
Can you help a landlord with a rental near Forres station?
Yes, rental work is part of what we do. Just send an email to info@mrmastic.co.uk and tell us about the property, and we will send you a clear quote.
Will you come out to Rafford?
Yes, Rafford is covered. We work across all of Scotland, from towns to the smallest places. Longer journeys are simply planned in advance.
How long does fire rated sealant take?
That depends on how much there is to do, but as a guide it takes anything from a few hours to several days, depending on how many gaps there are. We’ll give you a better idea when we quote.
Can you work in occupied buildings?
Yes. We regularly work in flats, HMOs, schools and offices while they’re in use, with access planned around residents or staff. Early starts or out-of-hours work can be arranged where it’s needed.
Can you tell me which gaps need fire stopping?
No, assessment is not something we do. When your assessor or designer has set out what’s needed, we’ll quote for the sealant work on it.
Are you an approved applicator?
Yes. We hold ARBOMaster approved applicator status, and we’re fully insured.
Will there be a smell?
There can be a smell while the sealant cures. Ventilation helps.
Do you seal gaps around fire door frames?
Yes, where the gap suits a sealant detail. Our work is the gap around the frame.
Common problems we fix in Rafford
Movement in the structure can open gaps too: a seal that cracks or pulls away leaves a path for smoke. Damage from cleaning, knocks and maintenance adds to it.
The most common problems we see are:
- Cracked or shrunken fire-rated sealant
- Fire stopping disturbed by later work
- Standard silicone or caulk in a fire-stopping gap
- Open joints along the top of partitions
Community buildings like Old Parish Church and Burial Ground are part of the picture too: service openings in its walls need the right fire-rated sealant, as in any building.
What to look for in a quote
- What product goes in the joint
- How the colour is chosen
- Whether they’re fully insured
- Whether all the old sealant comes out first