Isle of Wight · England
Chale Fire Rated Sealant
Fire-stopping gaps in Chale need attention? We remove the old material, prepare the joints and seal them properly, with a one-year guarantee.
- Sealant items on a fire risk assessment action list
- Gaps around pipes and cables through fire-resisting walls
- Holes left by a change of layout
How we handle fire rated sealant in Chale
Ordinary silicone or decorators’ caulk in a fire-stopping gap isn’t a fire-rated seal. We cut out the wrong material and the gap is resealed with a product tested for that use. Common call-outs are for new service routes left unsealed after building work and gaps flagged on a fire risk assessment, across door frames, pipe & cable gaps and linear gaps.
In a village or hamlet like Chale, commercial work is more likely to be a pub, a farm shop, holiday lets or a village hall than an office block. Each still needs sound sealant in its washrooms and kitchens, and fire-rated joints where services pass through walls.
Each job carries a 12-month guarantee, whatever its size.
- Place
- Chale (PO38)
- Region
- Isle of Wight
- Cover
- One year on every job
- Price
- A clear quote up front
- Phone
- 0345 464 0079
- Page updated
- 26 October 2026
For landlords and businesses
Failed sealant is one of the commonest items on a check-out report, and it’s easy to sort out between tenants. Several properties can go on one quote.
We regularly work with letting and managing agents. Send the address, what’s needed and the access arrangements and we’ll quote.
Nearby places to Chale
Other services in Chale
When to call us in Chale
Door frames are a common weak spot. The architrave hides the gap between frame and wall, so it’s easy to leave unsealed when doors are changed.
Common reasons people contact us are:
- Gaps where walls meet ceilings or slabs
- Damaged fire sealant left by other trades
- Open gaps behind door architraves
- Unsealed gaps where pipes and cables go through a wall
For buildings such as St Andrew's Church, service openings in its walls need the right fire-rated sealant, as in any building.
Questions to ask before you book
- How the joint is cleaned and prepared
- Who turns up on the day
- What guarantee comes with the work
- How the colour is chosen
Can I do it myself?
If you do try it yourself, take your time over the preparation: remove every trace of old sealant, clean and dry the joint, and follow the product’s cure time. If it fails, we can still redo it.
Too much sealant is as bad as too little. A heavy bead looks messy and copes badly with movement, and getting the depth right matters as much as the look.
How it works
Once we’re on site, we check the joints match what you told us. If anything is different, we explain it before carrying on. Most jobs then take from a few hours to a few days, depending on the number of gaps and the access. In a small place like Chale, access is usually the main thing to plan. If the job is outside, mention outbuildings, exposed walls and how to reach them.
- Access to each area is agreed so the work can run in order.
- Old, damaged or unsuitable sealant is removed.
- Gaps are cleaned of dust and loose material.
- We apply and tool the sealant to the product’s tested detail.
- Locations and products are written up and any gaps unsuitable for sealant are flagged.
Getting ready for the visit
- Let us know about parking restrictions
- Keep children and pets away from the work area
- For indoor joints, keep the area dry beforehand if you can
Ask for a quote
For fire rated sealant in Chale, ring 0345 464 0079 or send us an email. Tell us what the problem is and where, and you’ll get a clear quote before any work starts.
Read more
When it isn’t the sealant
We will not take on work that will not last, so here’s what sealant can’t put right:
- Problems with the door itself rather than the gap around the frame
- Construction that does not provide fire resistance on its own
- Large holes that need a different fire-stopping system
If in doubt, call 0345 464 0079 or send us an email and we’ll say what we think before booking.
What we seal
- Flats & HMOs
- Linear gaps
- Plasterboard & masonry
- Service penetrations
- Door frames
- Pipe & cable gaps
What happens if it’s left?
A quick fill with any sealant to hand is not fire stopping. A fire-rated product only performs as tested when it’s installed to its tested detail, which is why we match the product and the method to each gap. Older cottages and farmhouses around Chale can have timber floors and frames, where water from a failed joint can cause rot if it’s left.
Rather than a set price list, we price the job in front of us: the amount of work, the old material and the access. The price is agreed before we begin.
What you get with us
- Anti-fungal sanitary silicone in wet areas
- Experience in homes, commercial sites and hotels
- Every job guaranteed for a year
- Neat joints and a tidy finish
Keeping the joints in good condition
Looking after new joints is easy, and it makes a real difference:
- Include hidden areas like risers in routine checks
- Keep pictures of seals that will be hidden
- Get damaged fire seals looked at promptly
- File the fire-stopping record where your assessor can find it
Look at the sealed gaps as part of your routine walk-rounds. Watch for cracking, gaps or seals that have been disturbed and have them put right.
A flagged gap shouldn’t wait for the next assessment. Get it sealed and recorded so the item can be closed.
Fire rated sealant around Chale
If you run a hotel, guest house or holiday let in a coastal place like Chale, busy months put washrooms and kitchens under pressure, so it’s worth checking the sealant before the busiest weeks. In England, the Regulatory Reform (Fire Safety) Order 2005 requires a fire risk assessment for workplaces and for the common parts of blocks of flats, which is often where open fire-stopping gaps are first noticed. We apply fire-rated sealant to the assessor’s or designer’s specification and the product’s tested details.
Around Chale, as everywhere, fire rated sealant is only as good as the preparation behind it.
Chale is about 7 miles south of Newport, in the Isle of Wight. Homes, rented property, offices and hotels in Chale can book us for fire rated sealant. The work is guaranteed for a year. Our area takes in 125 places across the Isle of Wight. Our Portsmouth page covers work nearby (18 miles or so).
Postcode districts we cover here for fire rated sealant: PO38. Streets in the area include Church Place, Upper House Lane and Blythe Shute, all of which we cover. Close by, we work in Blackgang (1 mile south-east), Pyle (1 mile north-west), Chale Green (1 mile north), Atherfield Green (1 mile north-west) and Niton (2 miles south-east). Further out, we also cover Newport (7 miles north), Ryde (11 miles north-east), Cowes (11 miles north), Sandown (8 miles north-east), Shanklin (7 miles east) and Ventnor (5 miles east). Island and remote addresses take a little more planning, so please mention your location when you call 0345 464 0079 or send us an email.
What’s near Chale
Other landmarks nearby include Whitecroft Hospital (5.2 miles north) and Blackgang Sawmill Museum (0.6 miles south). For a walk, there’s Stenbury Down.
Chale: your questions answered
Is fire rated sealant in Chale guaranteed?
All our work, in Chale and everywhere else, comes with a 12-month guarantee. We’re fully insured, and an ARBOMaster approved applicator.
Do you cover Chale for fire rated sealant?
Yes. Our work covers London and the South East, and Chale is part of that. You can ring 0345 464 0079 or drop us an email and tell us what needs doing.
Is intumescent sealant the same as fire-rated sealant?
An intumescent material expands when it’s heated. Many fire-rated sealants work this way, but not all and which one is used depends on the job.
What sealant do you use?
We choose the sealant for the joint, not the other way round. Movement, water and weather all affect the choice, and we will tell you what we are using.
Where is Mr Mastic based?
We are a Crawley-based firm. We work across South East England, London and Scotland.
Can you tell me which gaps need fire stopping?
No. We work from the specification you give us.
Do you offer different sealant colours?
In most cases you can choose. We will tell you which colours the right product comes in and agree one before work begins.
Is it messy?
Tidy work is part of the job. We protect what’s around the joints, and the area is left clean when we finish.