Isle of Wight · England
Fire-rated sealant in Pyle, Isle of Wight
Intumescent and fire-rated sealant around gaps, frames and service penetrations for homeowners, landlords and businesses in Pyle. Fully insured, ARBOMaster approved and guaranteed for a year.
- Door frames with gaps between frame and wall
- Joints picked up in a fire-stopping survey
- Old fire sealant that has split or come away
Fire rated sealant in Pyle
Until it’s heated, intumescent sealant behaves like an ordinary sealant; then it swells to help close the gap. Which product suits a gap depends on its width, the materials either side and what runs through it. If you’re dealing with gaps around pipes and cables through fire-resisting walls and gaps where walls meet ceilings or slabs, we can put it right.
If you have holiday lets, a converted barn used for business or a community building near Pyle, washroom and kitchen sealant and any fire-rated joints need the same attention as anywhere.
Whatever the size of the job, you get the same 12-month guarantee.
- Place
- Pyle (PO38)
- Wider area
- Isle of Wight
- Guarantee
- One year on every job
- Quote
- Quoted before any work starts
- Phone
- 0345 464 0079
- Page updated
- 26 October 2026
How the visit works
We work through the job in order: protection first, then preparation, sealing and a tidy-up. Typically it takes from a few hours to a few days, depending on the number of gaps and the access. In a small place like Pyle, access is generally the main thing to plan. For outside work, also let us know about exposed walls and any outbuildings involved.
- We plan the order of work and access, floor by floor or flat by flat.
- Old, damaged or unsuitable sealant is removed.
- Gaps are cleaned of dust and loose material.
- We apply and tool the sealant to the product’s tested detail.
- Locations and products are written up and any gaps unsuitable for sealant are flagged.
Preparing for the visit
- Tell us if parking is tricky
- For business premises, tell us about site rules or sign-in
- Mention any tricky access
Ask for a quote
Getting a quote is simple: tell us what needs doing and where, and roughly how big it is. Photos by email help us understand the job, and we’ll take it from there.
Read more
How we quote for fire rated sealant
The quote reflects the job in front of us. We take into account:
- Which sealant suits the joint
- How many rooms, windows or areas are involved
- The size of the job
- How easy the joints are to reach
Every job is a little different, so we quote each one individually. Size, access and the product the joint needs all play a part.
What to tell us for a quote
To make quoting easier, please include:
- Where the property is
- Access, such as stairs, a lift or height
- Photos by email, if that is easy
- Whether it’s a home or a business
To get a quote, call 0345 464 0079 or email us with the location and a short description of the problem. We’ll send you a clear quote before any work starts.
What happens if it’s left?
Squirting in whichever sealant is nearest doesn’t make a fire seal. Fire-rated products are tested in set gap sizes, depths and substrates, which is why we match the product and the method to each gap. Older cottages and farmhouses around Pyle can have timber floors and frames, and water through a failed joint can rot timber if it’s left.
Rather than a set price list, we look at what your job involves: the amount of work, the old material and the access. You’ll know the price before we begin.
Why choose Mr Mastic in Pyle
- Trusted Arbo and Everbuild sealants
- Any old sealant cut out fully, not covered over
- Fully insured
- Approved under the ARBOMaster scheme
See our cost guide and what customers say.
Work for landlords, hotels and businesses
Failed sealant is one of the commonest items on a check-out report, and it’s easy to sort out between tenants. We can quote for more than one property at once.
In hotels, rooms out of use cost money, so we plan the work room by room around your bookings where we can. Hotel work is part of what we do, alongside homes and businesses.
Commercial buildings in Pyle
For seaside hotels, guest houses and holiday lets around Pyle, busy months put washrooms and kitchens under pressure, so it’s worth checking the sealant before the busiest weeks. Workplaces and the common parts of blocks of flats in England need a fire risk assessment under the Regulatory Reform (Fire Safety) Order 2005, which is often where open fire-stopping gaps are first noticed. We work to the specification you are given, installing the product to its tested details.
Around Pyle, as everywhere, fire rated sealant is only as good as the preparation behind it.
Pyle is about 6 miles south of Newport, in the Isle of Wight. Anywhere in PO38, our applicators can take on fire rated sealant. Our the Isle of Wight coverage runs to 125 places, and Pyle is one of them. For nearby work, see our Portsmouth page (18 miles or so).
Here we cover the PO38 postcode area for fire rated sealant. Streets in the area include Pyle Shute, Westside Lane and Atherfield Road, all of which we cover. If you are just outside Pyle, we cover Chale Green (1 mile north-east), Atherfield Green (1 mile north-west), Little Atherfield (1 mile north-west), Shorwell (3 miles north-west) and Thorncross (3 miles north-west). Larger places within reach include Newport (6 miles north), Ryde (11 miles north-east), Cowes (10 miles north), Sandown (8 miles north-east), Shanklin (7 miles east) and Ventnor (5 miles east). For island and remote addresses, a little more planning is needed.
Local landmarks in Pyle
Other landmarks nearby include Blackgang Sawmill Museum (1.4 miles south-east) and Whitecroft Hospital (4.5 miles north). For a walk, there’s Stenbury Down.
How the job changes by surface
Linear gaps
Some linear gaps have to cope with movement as well as fire. The product and depth are chosen to suit both.
Masonry and concrete
Holes through concrete and block are rarely neat. We measure the gap at its widest point against the product’s tested range.
Also in Pyle
Do you need fire rated sealant in Pyle?
Much fire stopping is hidden: above ceilings, inside risers and behind panels. Out of view, damage sits unnoticed until someone inspects.
It’s worth asking for a quote if you see:
- Gaps where walls meet ceilings or slabs
- Fire seals that have cracked with movement
- Gaps around pipes and cables through fire-resisting walls
- Standard silicone or caulk in a fire-stopping gap
Community buildings like St Andrew's Church are part of the picture too: gaps around pipes and cables are worth checking after any building work there.
Questions to ask before booking
- How the joint is cleaned and prepared
- What guarantee comes with the work
- What happens if the job turns out different
- Who does the work, and how experienced they are
FAQs for Pyle
Is Pyle in your area for fire rated sealant?
Yes. Our work covers London and the South East, and Pyle is part of that. You can ring 0345 464 0079 or drop us an email and let us know what needs doing, and we’ll give you a clear quote.
What guarantee comes with fire rated sealant in Pyle?
All our work, in Pyle and everywhere else, comes with a 12-month guarantee. We are fully insured, and an ARBOMaster approved applicator.
What information do you need?
Just the basics: the address or postcode, what’s wrong and any access issues. Then phone 0345 464 0079 or drop us an email.
Will it make a mess?
No. We protect the surfaces around the joints, and we tidy up before we go.
How long does the job take?
It depends on the size of the job, but most jobs take from a few hours to a few days, depending on the number of gaps and the access. We’ll give you a better idea when we quote.
What does intumescent mean?
An intumescent sealant expands when it gets hot, helping close the gap. Intumescent sealants are one kind of fire-rated sealant; which product suits depends on the gap, the substrate and the service.
Can I choose the sealant colour?
Normally, yes. Sealants come in white, clear, grey and other colours for many products, and we’ll agree it with you first.
Can you fill the gap behind a fire door frame?
Yes. We often seal open gaps hidden behind the architrave. Doors, seals and closers need a door specialist.
DIY versus a professional finish
Sealing over old silicone is the commonest DIY error. New silicone won’t bond to old, so it peels away and traps moisture behind it. Everything old must be removed first.
Some sealant jobs are within reach of a careful DIYer, like a short, easy-to-reach joint indoors. The common mistakes are sealing over old sealant, sealing a damp joint and using far too much.