Buckinghamshire · England
Cadmore End Fire Rated Sealant
Fire rated sealant for Cadmore End and the surrounding area: the right sealant, proper preparation and a neat finish. Call for a quick quote.
- Open gaps behind door architraves
- Old fire sealant that has split or come away
- Gaps filled with a product that isn’t fire-rated
Fire rated sealant in Cadmore End: local notes
In England, the Regulatory Reform (Fire Safety) Order 2005 requires a fire risk assessment for workplaces and for the common parts of blocks of flats, and gaps around services are often picked up there. We work to the specification you’re given, installing the product to its tested details.
For site and facilities teams at buildings such as Cadmore End CofE School, fire-stopping around service openings should be restored whenever new services go in. Letting a property close to Saunderton station? Then new cables or pipes through a fire-resisting wall leave a gap that needs the right sealant.
Cadmore End is about 5 miles west of High Wycombe, in Buckinghamshire. If you need fire rated sealant in Cadmore End, please call 0345 464 0079 or send us an email for a quick quote. We are based in Crawley and cover Buckinghamshire. 263 places in Buckinghamshire are on our list. You can also see our page for Reading, roughly 13 miles from Cadmore End.
Jobs for fire rated sealant in HP14 works the same way as everywhere else we cover. Neighbouring places we cover for fire rated sealant include Bolter End (1 mile east), Fingest (1 mile south-west), Wheeler End (1 mile east), Little Frieth (1 mile south) and Horsleys Green (1 mile north). We also work in nearby towns such as Aylesbury (13 miles north), High Wycombe (5 miles east), Chesham (12 miles north-east), Marlow (5 miles south-east), Amersham (12 miles east) and Beaconsfield (9 miles east).
Near you in Cadmore End
Locally, jobs take us to homes and businesses close to The Peacock pub. Cadmore End’s nearest station is Saunderton station, about 3.8 miles north-east of the centre. Other landmarks nearby include Wycombe Hospital (4.8 miles east). For a walk, there’s Bald Hill and Yoesden.
Fire rated sealant in Cadmore End
Deciding which gaps need fire stopping is not our role; that comes from your fire risk assessor, designer or building control. Our part is applying the specified sealant carefully, to the right depth and with the right backing. We work on plasterboard & masonry, flats & HMOs and service penetrations, and the jobs we see most are gaps where walls meet ceilings or slabs and gaps around pipes and cables through fire-resisting walls.
For a small place like Cadmore End, the journey and timings are agreed in advance, so it can be fitted around guests, clients or events where possible.
Our work is backed for twelve months.
- Place
- Cadmore End (HP14)
- Wider area
- Buckinghamshire
- Guarantee
- A year, on every job
- Quotes
- A clear price before work begins
- Call
- 0345 464 0079
- Page updated
- 26 October 2026
Places near Cadmore End
Also in Cadmore End
Questions from Cadmore End
Do you cover smaller places like Cadmore End?
Yes, we do. Our work covers London and the South East, and smaller places are part of that. The journey is planned ahead, so it helps to know about access.
Do you cover Cadmore End for fire rated sealant?
Yes, Cadmore End is within the area we cover. We work across London and the South East. Just call 0345 464 0079 or send us an email with a few details of the job, and we’ll give you a clear quote.
Can I do it myself?
It depends on the job. High-level, external movement and fire-rated joints are professional jobs, while a short indoor joint may be within reach.
What information do you need?
Let us know what needs doing and where. We’ll ask anything else we need to know.
Does someone need to be in?
For indoor joints, yes, someone needs to let us in. After that, you can carry on with your day.
How long does fire rated sealant take?
As a guide, most jobs take anything from a few hours to several days, depending on how many gaps there are. Bigger jobs take longer, and we’ll say how long yours will take.
Will we have a record of what was sealed?
Yes. We record the locations we’ve sealed and the products used for your files.
Can you work in occupied buildings?
Yes. Flats, HMOs, offices, schools and other occupied buildings are all part of our work. We agree access and the order of work with you first.
Signs you need fire rated sealant in Cadmore End
Sealant applied too thin, without the backing its detail needs, or onto dust won’t perform as it was tested. Rushed fire stopping is common.
The most common problems we see are:
- Gaps left after a refit or conversion
- Sealant items on a fire risk assessment action list
- Gaps filled with a product that is not fire-rated
- Seals cut through by electricians, plumbers or data installers
Community buildings like Church of St Mary Le Moor are part of the picture too: older buildings that have had new heating or wiring often have service gaps worth checking.
What to look for in a quote
- How the colour is chosen
- How the surfaces are prepared before sealing
- What the quote includes, VAT included or not
- What guarantee comes with the work
Keeping the joints in good condition
How long the joints last depends on use and care. We suggest:
- Store the list of sealed gaps with your building paperwork
- Include fire stopping when you schedule refits
- Include hidden areas like risers in routine checks
- Flag any open gap you spot round a pipe or cable
Avoid covering a sealed gap with anything that isn’t part of the tested detail. If it needs repair, use the same type of product. Ask us if you are not sure which product was used.
A gap left open in a fire-resisting wall or floor lets smoke spread in ways the building wasn’t designed for. Sealing it early is a simple step to take.
What happens if it’s left?
Leaving a gap until a refurbishment comes round can mean years with it open. Sealing the gap now is a contained job on its own that does not depend on other work. Where a wall is exposed, as many are in small places like Cadmore End, wind-driven rain gets into any failed joint, and damp in older walls is slow to dry out.
Every job is a little different, so we quote each one individually. The number of joints, how easy they are to reach and the sealant needed all make a difference, and we will explain the quote if you ask.
What you get with us
- Approved under the ARBOMaster scheme
- Every job guaranteed for a year
- Domestic, commercial and hotel work
- Quality sealants from Arbo and Everbuild
Take a look at what affects the cost and our reviews.
When something else is needed
Before booking, it’s worth knowing the limits:
- Deciding what fire stopping a building needs
- Issuing a fire rating or certificate for a building
- Big openings where sealant alone isn’t the tested solution
Not sure which it is? You can phone 0345 464 0079 or drop us an email and we’ll tell you honestly.
What we seal
- Flats & HMOs
- Door frames
- Linear gaps
- Service penetrations
- Pipe & cable gaps
- Plasterboard & masonry
DIY versus a professional finish
A DIY attempt does not rule out a professional job. We remove it and do the joint properly, so just mention it when you contact us.
Sealing over old silicone is the commonest DIY error. Silicone does not stick to old silicone, so it peels away and traps moisture behind it. All the old material has to come out first.
What happens on the day
The work is kept neat and contained to the joints we’re treating, so you can get on with your day. Expect the work to take anything from a few hours to several days, depending on how many gaps there are, and we tell you how long to leave it before we go. Somewhere as small as Cadmore End, access is often the only tricky part. If the job is outside, mention outbuildings, exposed walls and how to reach them.
- Before starting, we go through the specification or action list with you.
- Each gap is measured and its substrate and service noted.
- Unsuitable material such as ordinary foam or silicone is cut out and the gap cleaned.
- We fit backing where needed and apply the fire-rated sealant to depth.
- Every location is recorded with the product used for your files.
Before we arrive
- Let us know about earlier repairs to the joints
- On commercial sites, let us know about site rules
- Try not to wet indoor joints just before the visit
Getting a quote
Every job is quoted individually, so the first step is telling us about yours. Simply ring 0345 464 0079 or email us and describe the job, and pictures are welcome.
Related advice
Work for landlords, hotels and businesses
Failed sealant is one of the commonest items on a check-out report. We can quote for more than one property at once.
Businesses can book us for washrooms, kitchens, offices and more. For commercial premises, we can talk through working times when we quote.