Buckinghamshire · England
Fire-rated sealant in Bolter End, Buckinghamshire
Intumescent and fire-rated sealant around gaps, frames and service penetrations for homeowners, landlords and businesses in Bolter End. ARBOMaster approved applicators, fully insured, with a one-year guarantee.
- Cracked or shrunken fire-rated sealant
- Gaps around pipes and cables through fire-resisting walls
- Linear gaps at the head of walls
What we can’t put right
New sealant cannot fix everything, and we’ll tell you before any work starts. It won’t solve:
- Assessing a building’s fire safety
- Issuing a fire rating or certificate for a building
- Openings too large for sealant, which need batts, boards or another system
If in doubt, call 0345 464 0079 or send us an email and we will say what we think before you book.
Where we work in Bolter End
- Plasterboard & masonry
- Pipe & cable gaps
- Service penetrations
- Linear gaps
- Flats & HMOs
- Door frames
Fire rated sealant in Bolter End, done properly
Bigger jobs can be worked through in stages, flat by flat or floor by floor. It gives you a list to keep with the building’s fire safety documents. If you have gaps around pipes and cables through fire-resisting walls and unsealed gaps around fire door frames, we can put it right, whatever the surface.
Somewhere as small as Bolter End, commercial jobs tend to be pubs, holiday lets, farm buildings or halls rather than offices. They all have washrooms, kitchens and service openings that need the right sealant.
Big or small, you get the same 12-month guarantee.
- Place
- Bolter End (HP14)
- Region
- Buckinghamshire
- Guarantee
- A year, on every job
- Quote
- A clear quote up front
- Phone
- 0345 464 0079
- Updated
- 26 October 2026
What we do, step by step
We bring everything the job needs with us, so there’s nothing for you to buy. Once we have agreed what’s being done, we protect the area and start. It normally takes anything from a few hours to several days, depending on how many gaps there are. Somewhere like Bolter End needs a little journey planning: tell us about narrow lanes, gates, long drives and where we can park. We bring what the job needs, so it can be finished in one trip where possible.
- We go through the gaps on your list or survey and check each one’s size and substrate.
- We remove any old or unsuitable filler and clean the gap.
- Backing or fill is fitted where the product’s tested detail calls for it.
- We apply the fire-rated or intumescent sealant to the specified depth and tool it.
- Finally, we list where we worked and what we used, for your records.
Preparing for the visit
- Plan for the work area to be out of bounds to pets and children
- Tell us if parking is tricky
- Mention any leaks or damp you’ve noticed
Getting a quote
We quote each job on its own, so the first step is telling us about yours. Just call 0345 464 0079 or send us an email with the details.
Related advice
Places near Bolter End
More services for Bolter End
Surface by surface
Door frames
The gap between a door frame and the wall around it needs sealing as well as the door itself. We seal that gap with a fire-rated sealant suited to the frame and wall.
Plasterboard walls
Service holes in plasterboard are often rough and oversized. Gaps that are too big for sealant alone need a different detail and we’ll flag it.
Common questions in Bolter End
Do you cover Bolter End for fire rated sealant?
Yes, Bolter End is within the area we cover. Our work covers London and the South East. You can call 0345 464 0079 or drop us an email and let us know what needs doing, and we will send you a clear quote.
I let a flat near Saunderton station. Can you help?
Yes, we work for letting agents and landlords. You can ring 0345 464 0079 or send us an email with the address and a few details, and we’ll give you a fixed price before work begins.
Do I need to be at home?
It depends on the job. For work indoors, someone needs to let us in, while outside work can sometimes be arranged differently.
How much does fire rated sealant cost in Bolter End?
Every job is different, so each one gets its own quote. For a quick quote, phone 0345 464 0079 or drop us an email with a short description of the job.
Do you hold any approvals?
Yes. We’re ARBOMaster approved, the scheme for applicators of Arbo sealants.
Is it messy?
Tidy work is part of the job. Nearby surfaces are protected, and we clear up when we’re done.
Can you quote for more than one area?
Yes. More than one area can be quoted together.
Will the old sealant be removed?
Yes. All of the old material is cut out and the joint cleaned before resealing.
Fire rated sealant around Bolter End
In England, the Regulatory Reform (Fire Safety) Order 2005 requires a fire risk assessment for workplaces and for the common parts of blocks of flats, which is often where open fire-stopping gaps are first noticed. We work to the specification you are given, installing the product to its tested details.
Rented homes near Saunderton station change hands often, and new cables or pipes through a fire-resisting wall leave a gap that needs the right sealant. For site and facilities teams at buildings such as Lane End Primary School, fire-stopping around service openings should be restored whenever new services go in.
Bolter End is about 4 miles west of High Wycombe, in Buckinghamshire. Every kind of property in Bolter End is covered for fire rated sealant. Every job comes with our one-year guarantee. Bolter End is one of 263 towns and villages in Buckinghamshire where we work. Reading is on our list too, about 13 miles from Bolter End.
Work in HP14 works the same way as everywhere else we cover. Fire rated sealant is available to properties on Bolter End Lane, New Road and Finings Road and the roads around them. If you’re just outside Bolter End, we cover Wheeler End (1 mile north-east), Cadmore End (1 mile west), Lane End (1 mile south-east), Piddington (1 mile north-east) and Little Frieth (1 mile south). Larger places within reach include Aylesbury (13 miles north), High Wycombe (4 miles east), Chesham (12 miles north-east), Marlow (5 miles south-east), Amersham (11 miles east) and Beaconsfield (9 miles east).
Local landmarks in Bolter End
Around Bolter End, our work takes us to homes and buildings near The Peacock pub. Bolter End’s nearest station is Saunderton station, about 3.6 miles north. Other landmarks nearby include Wycombe Hospital (4 miles east) and High Wycombe Castle (4.3 miles east). For a walk, there’s Yoesden and Bald Hill.
How we quote for fire rated sealant
We do not publish a price list. The quote depends on:
- Any working-time requirements on site
- How easy the joints are to reach
- Whether old sealant or filler has to be cut out
- Any mould that needs treating
Some things make a job bigger or smaller: how much old sealant there is and how stubborn it is, whether mould needs treating, and whether the work is at height. Your quote takes all of that into account.
What we need to know
Photos help, but a description is a good start. Try to tell us:
- Whether it has been sealed before
- If it’s domestic, commercial or a hotel
- A few pictures by email, if you can
- How many joints, rooms or windows are involved
Need a quote? Please ring 0345 464 0079 or drop us an email and tell us about the job. We will explain what we’d do and give you a clear quote before we start.
Common problems we fix in Bolter End
Over time, buildings change layout and use. Conversions to flats and HMOs, and office refits, create new walls and new routes for services, with gaps to match.
Signs it’s time to call us include:
- New service routes left unsealed after building work
- Fire stopping disturbed by later work
- Ordinary sealant used where a fire-rated product was needed
- Gaps flagged on a fire risk assessment
If you look after a church, hall or community building such as Church of the Holy Trinity, older buildings that have had new heating or wiring often have service gaps worth checking.
What to look for in a quote
- What the quote includes, VAT included or not
- How the colour is chosen
- The length of the guarantee
- When the joint can take water or movement
Aftercare tips
A little care helps the new joints last. We recommend:
- Never patch a fire seal with standard sealant
- Plan fire stopping into any work that goes through walls or floors
- Get damaged fire seals looked at promptly
- Include hidden areas like risers in routine checks
Follow the cure time we give you before decorating over the sealant. Some fire-rated sealants can be painted and some can’t and we will tell you which one you have.
Leave a fire-stopping gap open and smoke can move through the building much more easily. Closing it is generally a straightforward job.
Why it’s worth doing now in Bolter End
Waiting for the next refit can leave a gap open for years. On its own, sealing it now is a small job. Where a wall is exposed, as many are in small places like Bolter End, wind-driven rain gets into any failed joint, and older walls, once damp, take a long time to dry.
Leaving a failed joint usually makes the job bigger, not smaller, because water and mould keep working on it. If you’re unsure, phone 0345 464 0079 or send us an email for an honest opinion and a quote.
Why us?
- 180+ five-star Google reviews
- Experience in homes, commercial sites and hotels
- Every job guaranteed for a year
- Approved under the ARBOMaster scheme
Read how sealant jobs are priced and customer reviews.