Hampshire · England
Fire-rated sealant in Burley, Hampshire
Professional fire rated sealant in and around Burley, with old sealant always removed completely and a 12-month guarantee.
- Holes left by a change of layout
- Open holes round services passing through fire walls
- Open gaps behind door architraves
For landlords and businesses
Whether it’s one flat or a portfolio, you get the same standard of work: the old material taken out, careful preparation and a 12-month guarantee.
If you manage several properties in or around Burley, several properties can be quoted together. Send us the addresses and the work at each.
How we handle fire rated sealant in Burley
In flats, HMOs, offices and schools, fire stopping is often disturbed by later work. A new cable run or a replaced pipe can leave an open hole behind. Those are the gaps we close, using a tested fire-rated product. We work on service penetrations, pipe & cable gaps and plasterboard & masonry, and the jobs we see most are linear gaps at the head of walls and fire seals that have cracked with movement.
If you have holiday lets, a converted barn used for business or a community building near Burley, the washrooms, kitchens and any fire-rated joints need the same care as a big site.
The work is covered for a year after we finish. If there’s a problem with it, please call 0345 464 0079 or send us an email.
- Where
- Burley (BH24)
- Wider area
- Hampshire
- Guarantee
- 12 months on all our work
- Price
- A clear price before any work starts
- Telephone
- 0345 464 0079
- Page updated
- 26 October 2026
What the job involves on each surface
Service penetrations
New gaps tend to show up where services have been added. Old or unsuitable filler comes out before the right sealant goes in.
Masonry and concrete
Preparation counts on brick, block and concrete. The gap is cleaned and backed where required.
What affects the cost of fire rated sealant
There’s no set price list, because no two jobs are the same. What we look at:
- The old material and how stubborn it is
- Any mould that needs treating
- The type of sealant required
- Access and height
Every job is a little different, so we quote each one individually. Size, access and the product the joint needs all make a difference.
Asking for a quote
What to tell us when you ask for a quote:
- If it’s domestic, commercial or a hotel
- How we’d reach the joints
- Where the property is
- The problem you’ve noticed
The more we know about the job, the more useful the quote. Let us know the location, the problem and roughly how many joints.
Burley: your questions answered
Do you cover smaller places like Burley?
Yes, smaller places are covered as well as towns. We work across London and the South East. Just mention lanes, gates or anything else about the route when you book.
I let a flat near Sway station. Can you help?
Yes, landlords and agents are among the people we work for, and several properties can go on one quote. You can call 0345 464 0079 or drop us an email with the details for a clear quote.
What do you put in the joint?
Each joint gets the product that suits it. Where it moves, gets wet or faces the weather makes a difference.
Can you tell me how many minutes the seal will last?
We don’t give ratings or certificates for our work. Your specification sets the requirement, and we fit a product whose tested details meet it.
Are you fully insured?
Yes, we’re fully insured.
Is the work guaranteed?
Yes. All our work carries our 12-month guarantee.
Can you do several jobs on one visit?
Yes, and it often makes sense. Doing several areas at once is generally more efficient, so mention them when you ask for a quote.
Is it messy?
Not at all. The area is protected while we work and cleaned up afterwards.
When to call us in Burley
If the sealant is too shallow, has the wrong backing or sits on a dusty surface, it isn’t installed as tested. Rushed fire stopping is common particularly when it was the last job before handover.
It’s worth asking for a quote if you see:
- Standard silicone or caulk in a fire-stopping gap
- Sealant items on a fire risk assessment action list
- Gaps left after a refit or conversion
- Seals cut through by electricians, plumbers or data installers
Community buildings like Church of St John the Baptist are part of the picture too: older buildings that have had new heating or wiring often have service gaps worth checking.
What your quote should include
- Whether the sealant suits the joint
- Whether they seal over old material or remove it
- What insurance they hold
- How the colour is chosen
What fire rated sealant looks like in Burley
Workplaces and the common parts of blocks of flats in England need a fire risk assessment under the Regulatory Reform (Fire Safety) Order 2005, which is often where open fire-stopping gaps are first noticed. We apply fire-rated sealant to the assessor’s or designer’s specification and the product’s tested details.
Rented homes near Sway station change hands often, and fire-rated sealant around pipes and cables through walls and floors needs making good whenever new services go through. Managing a site like Burley Primary School? Then fire-stopping around service openings should be restored whenever new services go in.
Burley is in Hampshire. Jobs in Burley get the same care as everywhere else we work: the old material taken out, joints prepared properly and a 12-month guarantee. Burley is one of 683 towns and villages in Hampshire where we work for fire rated sealant. You can also see our page for Southampton, roughly 15 miles from Burley.
Every address in BH24 is covered for fire rated sealant. We cover properties on The Mall, The Cross and Doveys Close. We also cover the places around Burley: Burley Street (1 mile north-west), Bagnum (2 miles west), Foulford (2 miles north-west), Crow (3 miles west) and Forest Corner (3 miles north-west). Further out, we also cover Totton (11 miles north-east), Lymington (8 miles south-east), Romsey (15 miles north-east), Hythe (13 miles east), New Milton (5 miles south) and Ringwood (4 miles west).
What’s near Burley
Typical jobs here are in homes near The Burley Inn and the streets around them. The closest station to Burley is Sway station, roughly 5 miles south-east. The countryside around Burley includes Blashford Lakes and Linbrook Lake.
When something else is needed
A few problems are outside what sealant work can do:
- Certifying a building or signing off its fire safety
- Doors that are not fire doors in the first place
- Fire risk assessments, which need a qualified assessor
If you are not sure, just phone 0345 464 0079 or email us and we’ll give you a straight answer.
What we seal
- Door frames
- Pipe & cable gaps
- Linear gaps
- Plasterboard & masonry
- Service penetrations
- Flats & HMOs
Also near Burley
Other services in Burley
Aftercare tips
A little care helps the new joints last. We recommend:
- Take photos of fire stopping before ceilings or boxing go back
- Check whether a sealant can be painted before decorating over it
- Flag any open gap you spot round a pipe or cable
- Allow for resealing whenever new services are run
Look at the sealed gaps as part of your routine walk-rounds. Look for cracks, gaps or sealant that has been cut or pulled out and have them put right.
An open gap isn’t only a fire issue: noise, draughts and even pests can come through too. Dealing with them early helps with all of these.
How the visit works
Most of a good job is in the preparation, so that’s where we spend the time. Every joint is cleaned and dried before new material goes in. All told, the work takes a few hours for a handful of gaps, and longer for a whole building. For a village or hamlet like Burley, the journey is planned in advance: tell us about narrow lanes, gates, long drives and where we can park. We bring what the job needs, so it can be finished in one trip where possible.
- We start with the survey or action list, checking the size and surfaces of every gap.
- Old or unsuitable sealant is cut out and the gap cleaned.
- We put in whatever backing or fill the product detail specifies.
- We apply the fire-rated or intumescent sealant to the specified depth and tool it.
- We record the locations and products used for your records.
Before we arrive
- Let us know about parking restrictions
- Move anything stored near the joints
- On commercial sites, let us know about site rules
Getting a quote
Want a quote for fire rated sealant? Please call 0345 464 0079 or email us with a few details. You will know what we plan to do, and what it will cost, before any work begins.