Hampshire · England
Fire-rated sealant in Burley Street, Hampshire
Fire rated sealant in Burley Street from a team with over 20 years’ experience. Rated 4.9 on Google from 180+ five-star reviews.
- Cracked or shrunken fire-rated sealant
- Open holes round services passing through fire walls
- Seals cut through by electricians, plumbers or data installers
Fire rated sealant in Burley Street, done properly
Intumescent sealant looks much like any other sealant until it gets hot; in a fire it expands into the joint. Which product suits a gap depends on its width, the materials either side and what runs through it, so we follow the tested detail for each one. If you have holes left by a change of layout and unsealed gaps around fire door frames, we can help, on service penetrations, flats & HMOs and plasterboard & masonry alike.
Somewhere as small as Burley Street, commercial jobs tend to be pubs, holiday lets, farm buildings or halls rather than offices. They all have washrooms, kitchens and service openings that need the right sealant.
The work is covered for a year after we finish. If anything isn’t right with it, call 0345 464 0079 or drop us an email.
- Place
- Burley Street (BH24)
- Region
- Hampshire
- Cover
- 12 months on all our work
- Quote
- A clear quote up front
- Call
- 0345 464 0079
- Updated
- 26 October 2026
Aftercare tips
Looking after new joints is easy, and it makes a real difference:
- Make resealing part of every contractor’s brief
- Never patch a fire seal with standard sealant
- Keep the record of products and locations with your fire safety documents
- Get damaged fire seals looked at promptly
Any fire seal that’s cut or drilled needs resealing to its tested detail. If you need new services through a sealed wall, plan the fire stopping as part of the job.
It’s easiest to seal gaps while they’re few and easy to reach. Leave them and each new job adds another hole and the list grows.
Landlord and commercial work in Burley Street
Whether it’s one flat or a portfolio, you get the same standard of work: the old material taken out, careful preparation and a 12-month guarantee.
We work for letting agents and landlords as well as homeowners. Resealing between tenancies keeps a property looking cared for before the next move-in.
Workplaces and buildings in Burley Street
Workplaces and the common parts of blocks of flats in England need a fire risk assessment under the Regulatory Reform (Fire Safety) Order 2005, and gaps around services are often picked up there. We work to the specification you are given, installing the product to its tested details.
Schools such as Burley Primary School are buildings too, and gaps opened by contractors for new cabling are a common finding in schools and offices.
Burley Street is in Hampshire. Our applicators cover fire rated sealant for homes and businesses in Burley Street and nearby. 683 places in Hampshire are on our list, large and small. You can also see our page for Southampton, roughly 15 miles from Burley Street.
All of BH24 is covered for fire rated sealant. We cover properties on Tyrells Lane, Ringwood Road and Forest Road. Neighbouring places we cover for fire rated sealant include Burley (1 mile south-east), Foulford (2 miles north-west), Forest Corner (2 miles north-west), Shobley (2 miles north-west) and Bagnum (2 miles south-west). Larger places within reach include Totton (11 miles north-east), Lymington (9 miles south-east), Romsey (15 miles north-east), Hythe (14 miles east), New Milton (6 miles south) and Ringwood (3 miles west).
Around Burley Street
Locally, jobs take us to homes and businesses close to The Queen's Head pub, among other places. Green spaces nearby include Linbrook Lake and Blashford Lakes.
What happens on the day
The work is kept neat and contained to the joints we’re treating, so you can carry on as normal. The job normally takes anything from a few hours to several days, depending on how many gaps there are. For a village or hamlet like Burley Street, the journey is planned in advance: let us know about lanes, gates and parking. Everything for the job comes with us, so a second trip is avoided where possible.
- We begin by agreeing the list of gaps from your assessor’s or designer’s requirements.
- Each gap is measured and its substrate and service noted.
- Any non-fire-rated filler is removed and the faces cleaned.
- The specified fire-rated sealant goes in over any backing its detail requires.
- We hand over a list of locations and products for your files.
Getting ready for the visit
- Tell us about access, such as stairs, a lift or high-level joints
- Clear the area around the work
- Keep pets and children clear of the area while we work
Ask for a quote
Asking for a quote is easy: let us know the job and the location. Photos by email help us understand the job, and we will come back to you with a quote.
Read more
Questions from Burley Street
Is fire rated sealant in Burley Street guaranteed?
All our work, in Burley Street and everywhere else, comes with a 12-month guarantee. We are also fully insured and ARBOMaster approved.
Do you cover Burley Street for fire rated sealant?
Yes, Burley Street is within the area we cover. Our work covers London and the South East. You can ring 0345 464 0079 or drop us an email and let us know what needs doing.
How long will you be here?
As a guide, most jobs take from a few hours to a few days, depending on the number of gaps and the access. Bigger jobs take longer, and we will tell you how long to expect.
What sealant do you use?
We choose the sealant for the joint, not the other way round. Movement, water and weather all affect the choice.
Are you fully insured?
Yes, we’re fully insured.
Do you provide details of the products used?
Yes. Locations and products are written up when we finish. Tell us if your assessor needs it in a particular format.
Should I try DIY first?
Sometimes. The key is preparation: remove all the old material and work on a clean, dry joint. We can always put it right if it fails.
Can you match the sealant colour?
We will suggest a colour to suit the surroundings. The product needed can limit the range.
Other services in Burley Street
Surface by surface
Flats and HMOs
Conversions normally leave a mix of old and new service holes. The gaps on your list are sealed with a fire-rated product and record where they are.
Service penetrations
New gaps tend to show up where services have been added. Old or unsuitable filler comes out before the right sealant goes in with backing where the detail needs it.
What affects the cost of fire rated sealant
There’s no set price list, because no two jobs are the same. What we look at:
- Mould in or behind the old joints
- Any working-time requirements on site
- How much there is to do
- The number of rooms or windows
Commercial jobs are quoted on the same basis as homes: the amount of work, the access and the products needed, along with when we can work on site. Call for a quick quote and we will explain what it covers.
What we need to know
To help us quote quickly, please include:
- The problem you’ve noticed
- The rough size of the job
- If someone has resealed it before
- Photos by email, if that is easy
Need a quote? Please call 0345 464 0079 or email us with a few details. We will explain what we’d do and give you a clear price before we start.
Signs you need fire rated sealant in Burley Street
Door frames are a common weak spot. The architrave hides the gap between frame and wall, so it’s easy to leave unsealed when doors are changed.
The most common problems we see are:
- Gaps left after a refit or conversion
- Linear gaps at the head of walls
- Old fire sealant that has split or come away
- Gaps flagged on a fire risk assessment
Around Burley Street, as everywhere, fire rated sealant is only as good as the preparation behind it.
What to look for in a quote
- Is the old sealant removed completely?
- How long the guarantee is
- Are they insured?
- Is VAT in the price?
Leave it or put it right?
Waiting for the next refit can leave a gap open for years. Sealing the gap now is a contained job on its own and needn’t wait for anything else. Where a wall is exposed, as many are in small places like Burley Street, wind-driven rain gets into any failed joint, and damp in older walls is slow to dry out.
Leaving a failed joint normally makes the job bigger, not smaller. If you are not sure whether it needs doing, ring 0345 464 0079 or email us for an honest opinion and a quote.
Why us?
- Any old sealant cut out fully, not covered over
- Over 20 years’ experience
- Fully insured
- Trusted Arbo and Everbuild sealants
Read our cost guide and our reviews.