Orkney Islands · Scotland
Fire Rated Sealant in Brinian
Intumescent and fire-rated sealant around gaps, frames and service penetrations for householders, landlords and businesses in Brinian. Fully insured, ARBOMaster approved and guaranteed for a year.
- Gaps flagged on a fire risk assessment
- Damaged fire sealant left by other trades
- Gaps around pipes and cables through fire-resisting walls
Fire rated sealant around Brinian
If you run a hotel, guest house or holiday let in a coastal place like Brinian, heavy use in the busy months is hard on washroom and kitchen sealant, and any building work there should leave fire-rated joints made good. Work on the islands has to be planned around ferry crossings and the weather, so the more notice, the better.
Around Brinian, as everywhere, fire rated sealant is only as good as the preparation behind it.
Brinian is about 10 miles north of Kirkwall, in the Orkney Islands. For fire rated sealant in and around Brinian, it’s easy to get a quote: please drop us a line at info@mrmastic.co.uk. We cover the Orkney Islands from our Crawley base, Brinian included. Our the Orkney Islands coverage runs to 51 places, and Brinian is one of them.
Postcode districts we cover here for fire rated sealant: KW17. Brinian is on the B9065, so it’s easy for us to get to. Close by, we work in Tingwall (4 miles south-west), Evie (5 miles west), Gorseness (5 miles south), Isbister (6 miles south-west) and Norseman (7 miles south-west). Being one of the Orkney Islands’s larger places, Brinian has homes, rented property and businesses of every kind. Island and remote addresses take a little more planning, so tell us where you are when you ask for a quote.
Around Brinian
Nearby you’ll also find Langskaill House (3.5 miles south). Open spaces near Brinian include Loch of Oorns and Blotchnie Fiold.
Fire rated sealant in Brinian
Intumescent sealant looks much like any other sealant until it gets hot; then it swells to help close the gap. Which product suits a gap depends on its width, the materials either side and what runs through it, so we work to the manufacturer’s details. Typical jobs include gaps filled with a product that isn’t fire-rated and cracked or shrunken fire-rated sealant, across service penetrations, linear gaps and flats & HMOs.
Work in a place like Brinian is planned ahead, journey included, so it can be fitted around bookings or opening times where possible.
The work is guaranteed for twelve months. If something is not right with it in that time, tell us and we will put it right.
- Place
- Brinian (KW17)
- Wider area
- Orkney Islands
- Cover
- A year, on every job
- Quotes
- A clear quote up front
- info@mrmastic.co.uk
- Page updated
- 26 October 2026
Why it’s worth doing now in Brinian
An open gap in a fire-resisting wall is a route for smoke and fire. A proper seal lets the wall do its job again, and the work involved is often modest. Out of town in Scotland, exposed walls take a lot of weather, and damp in stone or harled walls takes a long time to dry once water gets behind a joint.
Commercial jobs are quoted on the same basis as homes: the amount of work, the access and the products needed. Call for a quick quote and we will explain what it covers.
What you get with us
- Sanitary silicone with an anti-fungal additive in wet areas
- Old sealant always removed completely
- More than 20 years in sealant work
- Approved under the ARBOMaster scheme
See our cost guide and what customers say.
Landlords, agents and businesses in Brinian
For anyone letting property in or around Brinian, jobs at different addresses can go on one quote. Send us the addresses and the work at each, and pictures by email help.
Letting agents and landlords in Brinian can book us as well as homeowners. Sealant work between tenants keeps a property looking cared for.
What happens on the day
You don’t need to clear the whole room or building before we come, just the space around the work. We protect the rest, and the job takes from a few hours to a few days, depending on the number of gaps and the access for a typical job. Somewhere like Brinian may be a longer drive, and the journey is planned ahead. Mention tracks, gates, ferries or anything else about the route.
- Before starting, we go through the specification or action list with you.
- Each gap is measured and its substrate and service noted.
- Any non-fire-rated filler is removed and the gap cleaned.
- The specified fire-rated sealant goes in over any backing its detail requires.
- Every location is recorded with the product used for your records.
How to prepare
- Keep pets and children clear of the area while we work
- On commercial sites, let us know about site rules
- Let us know if you’ve seen damp or leaks
Ask for a quote
There’s no standard price list. Instead, we send you a clear quote for your job. To arrange one, drop us a line at info@mrmastic.co.uk.
Advice
What else we do in Brinian
Looking after it afterwards
After the cure time, these simple habits help:
- Ask which product was used before you paint
- Report cracked or damaged seals as soon as you notice them
- Ask every contractor to reseal any fire stopping they disturb
- Keep photos of seals that will be hidden
Do not add foam, filler or ordinary sealant over a fire seal. Repairs should use a matching fire-rated product. We can tell you which product we used.
It’s easiest to seal gaps while they’re few and easy to reach. Over time, more work adds more holes and the list grows.
Brinian questions
Do Scottish building rules affect fire-rated sealant work in Brinian?
Scotland has its own building regulations, the Building (Scotland) Regulations, with their own technical handbooks. Whatever the rules, fire-rated sealant has to be installed to the manufacturer’s tested details, and that’s how we fit it. We do not certify buildings or carry out fire risk assessments, so your fire risk assessor or building control will advise on what’s needed.
Do you cover smaller places like Brinian?
Yes, Brinian is covered. Our work covers the whole of Scotland, islands included, from towns to the smallest places. Longer journeys are simply planned in advance.
Which products do you use?
The product depends on the job: anti-fungal sanitary silicone in wet areas, and other sealants where joints move or face the weather. Brands we use include Arbo and Everbuild.
Is standard sealant good enough for a fire gap?
No. Where a fire-rated seal is needed, it has to be a product tested for that use.
Are you fully insured?
Yes. Full insurance covers our work.
Will the old sealant be removed?
Yes, every time. New sealant won’t bond properly to old, so the joint is cleaned back first.
Can you fill the gap behind a fire door frame?
Yes. We seal the gap between the frame and the wall with a suitable fire-rated product. The door, its seals and closer are for a door specialist.
Do I have to be there?
That depends on where the joints are. Inside work needs someone to give us access, while outside work can sometimes be arranged differently.
What we can’t put right
It helps to know what we can’t do too:
- Fire risk assessments, which need a qualified assessor
- A wall that is not a fire-resisting element to begin with
- Openings too large for sealant, which need batts, boards or another system
If in doubt, drop us a line at info@mrmastic.co.uk and we’ll say what we think before booking.
Joints and surfaces we work on
- Plasterboard & masonry
- Door frames
- Pipe & cable gaps
- Flats & HMOs
- Linear gaps
- Service penetrations
Quotes for fire rated sealant in Brinian
Every job gets its own quote. This is what makes a difference:
- The type of sealant required
- The old material and how stubborn it is
- How many areas need sealing
- How much there is to do
A few things move the cost up or down: the old material and how easily it comes out, any mould to treat, and whether we need extra access for height. Your quote takes all of that into account.
Helping us quote
There’s no need for technical detail. Just tell us:
- What the problem is, such as mould, gaps, leaks or cracking
- If it’s domestic, commercial or a hotel
- The address or postcode of the job
- A few photos by email, if you can
For a quick quote, get us on the phone, or send an email if you’d rather. Describe what needs sealing and we will talk you through the work and give you a clear quote.
Signs you need fire rated sealant in Brinian
Lots of unsealed gaps appear long after the building was completed. Electricians, plumbers and data installers drill through walls and ceilings and the hole they leave doesn’t always get resealed.
Signs it’s time to call us include:
- Ordinary sealant used where a fire-rated product was needed
- Unsealed gaps around fire door frames
- Gaps around pipes and cables through fire-resisting walls
- Old fire sealant that has split or come away
For jobs in and around Brinian, choosing the right material for each joint is as important as a tidy finish.
Comparing quotes
- Are they insured?
- Which colour the sealant will be
- Whether all the old sealant comes out first
- How the joint is cleaned and prepared