Shetland Islands · Scotland
Fire Rated Sealant in Aywick
Intumescent and fire-rated sealant around gaps, frames and service penetrations in Aywick, with a one-year guarantee on every job. Call for a quick quote.
- Open gaps behind door architraves
- Holes left by a change of layout
- Gaps flagged on a fire risk assessment
Fire rated sealant in Aywick, done properly
Intumescent sealant looks much like any other sealant until it gets hot; in a fire it expands into the joint. Which product suits a gap depends on its width, the materials either side and what runs through it. Typical jobs include sealant items on a fire risk assessment action list and gaps left after a refit or conversion, across service penetrations, flats & HMOs and door frames.
Commercial work around smaller Scottish places tends to mean hotels, guest houses, schools and halls rather than offices. Each needs sound sealant in its washrooms and kitchens, and fire-rated joints kept in good order.
Big or small, you get the same one-year guarantee in Aywick and across the Shetland Islands.
- Place
- Aywick (ZE2)
- Region
- Shetland Islands
- Guarantee
- 12 months on all our work
- Price
- Quoted before any work starts
- info@mrmastic.co.uk
- Page updated
- 26 October 2026
Quotes for fire rated sealant in Aywick
The quote reflects the job in front of us. We look at:
- The size of the job
- Which sealant suits the joint
- How much old sealant there is and how hard it is to remove
- Any mould that needs treating
Doing several joints on one visit usually makes better use of the time than several visits, so tell us about everything that needs sealing. We will send you a clear quote for the lot.
What we need to know
There’s no need for technical detail. It helps if you can tell us:
- If it’s domestic, commercial or a hotel
- Roughly how big the job is
- How we’d reach the joints
- Where the job is, and your postcode
There’s no standard price list, because every job is different. Instead, we send you a clear quote for your job. To arrange one, drop us a line at info@mrmastic.co.uk.
When something else is needed
In fairness, there are a few things sealant won’t fix:
- A wall that isn’t a fire-resisting element to begin with
- Issuing a fire rating or certificate for a building
- Large holes that need a different fire-stopping system
If in doubt, email us at info@mrmastic.co.uk and we’ll say what we think.
Where we work in Aywick
- Pipe & cable gaps
- Service penetrations
- Plasterboard & masonry
- Linear gaps
- Flats & HMOs
- Door frames
Aywick: your questions answered
Will you come out to Aywick?
Yes, smaller places are covered as well as towns. We work across all of Scotland, including the islands, where work is planned around ferry crossings. Let us know about access, parking and anything unusual about getting there when you book.
How do Scotland’s building regulations apply to fire-rated sealant in Aywick?
Scotland has its own building regulations, the Building (Scotland) Regulations, with their own technical handbooks. Fire-rated sealant has to go in to the product’s tested details, and we follow them. We do not certify buildings or carry out fire risk assessments, so your fire risk assessor or building control will advise on what’s needed.
Can I do it myself?
It depends on the job. Work at height, movement joints, fire-rated gaps and large areas are best left to a professional, while a short indoor joint may be within reach.
Do I have to be there?
If the work is inside, we need someone to let us in. After that, you can carry on with your day.
Is there any odour?
That depends on the sealant. Some products have a noticeable smell, others very little.
How long does fire rated sealant take?
Typically it takes a few hours for a handful of gaps, and longer for a whole building. Bigger jobs take longer, and we will say how long yours will take.
What fire rating will the seal have?
Ratings and certificates are not something we issue. The performance comes from the product’s tested details and the specification from your assessor or designer.
Can you give us a record of the work?
Yes. We record the locations we have sealed and the products used to keep with your fire safety documents.
Should I try it myself first?
If you’ve already had a go yourself, that’s fine. We cut it out and start again, so just mention it when you contact us.
Not every job suits DIY: high-level joints, fire-rated gaps, external movement joints and big jobs call for the right materials, safe access and experience.
How the visit works
On the day, there’s very little for you to do. Show us the job and we will take it from there. The work itself takes from a few hours to a few days, depending on the number of gaps and the access, including the tidy-up. For a place like Aywick, longer drives are planned in advance. Mention tracks, gates, ferries or anything else about the route.
- Before starting, we go through the specification or action list with you.
- Each gap is measured and its substrate and service noted.
- Unsuitable material such as ordinary foam or silicone is cut out and the faces cleaned.
- The specified fire-rated sealant goes in over any backing its detail requires.
- Every location is recorded with the product used for your files.
Before we arrive
- Tell us if parking is tricky
- Try not to wet indoor joints just before the visit
- Mention any tricky access
Get a quote
Need a quote? Please send an email to info@mrmastic.co.uk with a few details. You will know what we plan to do, and what it will cost, before any work begins.
Advice
What fire rated sealant looks like in Aywick
For seaside hotels, guest houses and holiday lets around Aywick, heavy use in the busy months is hard on washroom and kitchen sealant, and any building work there should leave fire-rated joints made good. Scotland has its own building regulations, the Building (Scotland) Regulations, with technical handbooks. We install fire-rated sealant to the product’s tested details, though we do not certify buildings or do fire risk assessments.
For jobs in and around Aywick, choosing the right material for each joint is as important as a tidy finish.
Aywick is in the Shetland Islands. Whether you’re in the middle of Aywick or further out, we cover fire rated sealant for every kind of property, from flats and houses to offices and hotels. Across the Shetland Islands, we cover 63 places, Aywick among them.
All of ZE2 is within our area for fire rated sealant, from the main roads to the quietest streets. Close by, we work in Mid Yell (3 miles north), Camb (4 miles north), Burravoe (4 miles south), Houbie (6 miles north-east) and Mossbank (9 miles south-west). For island and remote addresses, the job takes a little more planning.
Landmarks near Aywick
Open spaces near Aywick include Loch of Quheyin and White Hill of Vatsetter.
Looking after it afterwards
A little care helps the new joints last. Our advice:
- File the fire-stopping record where your assessor can find it
- Do not paint over fire sealant until it has cured
- Make resealing part of every contractor’s brief
- Plan fire stopping into any work that goes through walls or floors
Leave the sealant to cure fully before painting near it. Not every fire-rated sealant takes paint and we will tell you which one you have.
A gap left open in a fire-resisting wall or floor lets smoke spread in ways the building wasn’t designed for. Closing it is normally a straightforward job.
What we are called out for in Aywick
Over time, buildings change layout and use. A house turned into flats or an HMO, or an office split into smaller units, brings new walls, new service routes and new gaps.
The problems people generally mention when they call include:
- Door frames with gaps between frame and wall
- Gaps where walls meet ceilings or slabs
- Open holes round services passing through fire walls
- Gaps left after a refit or conversion
In and around Aywick, as anywhere, good fire rated sealant starts with a clean, dry, properly prepared joint.
Before you book anyone
- Whether the sealant suits the joint
- How the joint is cleaned and prepared
- How the colour is chosen
- The length of the guarantee
Why act early in Aywick
An unsealed gap lets smoke and fire get round a wall that was built to hold them back. Sealing it properly restores what the wall was there to do, and the work involved is often modest. Around Aywick, water from a failed joint in an older stone home can soak into timber and plaster, which is a far bigger job than the sealant.
What it costs depends on the size of the job, how hard the old material is to remove and access to the work. You’ll have a clear quote before any work starts.
Why Aywick clients choose us
- 4.9 on Google from 180+ five-star reviews
- Neat joints and a tidy finish
- Old sealant always removed completely
- We are fully insured