Shetland Islands · Scotland
Mossbank Fire Rated Sealant
Intumescent and fire-rated sealant around gaps, frames and service penetrations for homes and businesses in Mossbank and across the Shetland Islands. Fully insured, ARBOMaster approved and guaranteed for a year.
- Gaps flagged on a fire risk assessment
- Unsealed gaps where pipes and cables go through a wall
- New service routes left unsealed after building work
Fire rated sealant around Mossbank
For seaside hotels, guest houses and holiday lets around Mossbank, heavy use in the busy months is hard on washroom and kitchen sealant, and any building work there should leave fire-rated joints made good. Work on the islands has to be planned around ferry crossings and the weather, so the more notice, the better.
For jobs in and around Mossbank, choosing the right material for each joint is as important as a tidy finish. In and around Mossbank, as anywhere, good fire rated sealant starts with a clean, dry, properly prepared joint.
Mossbank is in the Shetland Islands. Whether you’re in the middle of Mossbank or further out, we cover fire rated sealant for every kind of property, from flats and houses to offices and hotels. Our the Shetland Islands coverage runs to 63 places, and Mossbank is one of them.
We work across the ZE2 postcode area for fire rated sealant and the streets around it. You’ll find streets such as Smuggabank, Rayburn Road and Burraness, all of which we cover. Nearby, we also carry out fire rated sealant in Firth (1 mile south-west), Scatsta (4 miles south-west), Burravoe (5 miles north-east), Ollaberry (6 miles north-west) and Vidlin (6 miles south). Island and remote addresses take a little more planning, so tell us where you are when you ask for a quote.
Near you in Mossbank
The countryside around Mossbank includes Neshion Water.
How we handle fire rated sealant in Mossbank
Later work by other trades often breaks through fire stopping, especially in flats, HMOs, offices and schools. A new cable run or a replaced pipe can leave an open hole behind. We seal them with a product tested for that kind of gap. We work on service penetrations, plasterboard & masonry and pipe & cable gaps, and people most often call us about ordinary sealant used where a fire-rated product was needed and unsealed gaps where pipes and cables go through a wall.
For holiday lets, guest houses and community buildings in or near Mossbank, washroom and kitchen sealant and any fire-rated joints need the same attention as anywhere.
There’s a 12-month guarantee on every job, large or small.
- Where
- Mossbank (ZE2)
- Wider area
- Shetland Islands
- Cover
- A year, on every job
- Quotes
- A clear quote up front
- info@mrmastic.co.uk
- Updated
- 26 October 2026
Different surfaces, different methods
Linear gaps
Head-of-wall gaps are often hidden above suspended ceilings. We seal them along their full length leaving no stretch unsealed.
Flats and HMOs
Flats and HMOs rely on fire separation between homes and the common parts. We work through the gaps on your assessment.
Landlord and commercial work in Mossbank
We regularly work with letting and managing agents. Tell us the address, the job and how access works.
Hotels need rooms back in use, so the work can be planned room by room. We’ve worked in hotels as well as homes and businesses.
Why act early in Mossbank
Items left open on a fire risk assessment tend to come back at the next review. Having them sealed and recorded now gives you evidence that the item was dealt with. When the nearest tradesperson is a drive away, it’s tempting to leave a small leak, but water behind a failed seal does the most damage when nobody’s watching.
A few things move the cost up or down: the old material and how easily it comes out, any mould to treat, and whether we need extra access for height. Your quote takes all of that into account.
Why us?
- Homes, businesses and hotels
- Tidy, careful work
- Quality sealants from Arbo and Everbuild
- ARBOMaster approved applicator
FAQs for Mossbank
Do you cover Mossbank for fire rated sealant?
Yes, Mossbank is within the area we cover. We work across all of Scotland. You can email us at info@mrmastic.co.uk and tell us what needs doing.
Do you cover smaller places like Mossbank?
Yes, we do. Our work covers the whole of Scotland, islands included, from towns to the smallest places. The journey is planned ahead, so it helps to know about access.
Are you insured?
Yes, we are fully insured for domestic and commercial work.
Do I need to be at home?
If the work is inside, we need someone to let us in. After that, you can carry on with your day.
Can you tell me which gaps need fire stopping?
No, we don’t assess buildings. Once you have a specification or action list from your assessor or designer, we can quote for the fire-rated sealant items.
Where do you work from?
Our base is in Crawley, West Sussex, and we work across South East England, London and Scotland.
Can you fill the gap behind a fire door frame?
Yes, if the gap is within the product’s tested range. We seal the frame-to-wall gap, not the door itself and we’ll tell you if we spot problems with the door.
Will the old sealant be removed?
Yes. Sealing over old sealant is the main reason resealing fails early, and it’s something we never do.
How to look after the new joints
Once the sealant has cured, a few habits help it last:
- Plan fire stopping into any work that goes through walls or floors
- Keep pictures of seals that will be hidden
- Check risers, ceiling voids and cupboards during building checks
- Keep general-purpose foam and caulk away from fire-stopping gaps
File the record of locations and products with your fire safety paperwork. It saves time at the next inspection or assessment.
When you plan work that goes through walls or ceilings, plan the fire stopping too. Catching it then saves a separate visit later.
The process
Most of a good job is in the preparation, so that is where we spend the time. Every joint is cleaned and dried before new material goes in. All told, the work takes a few hours for a handful of gaps, and longer for a whole building. Outside jobs in Mossbank need a dry day, because sealant will not bond to a wet joint, so external jobs may need to move if the day turns wet. Indoor work goes ahead whatever the weather.
- We plan the order of work and access, floor by floor or flat by flat.
- We take out any damaged or unsuitable sealant.
- Dust and loose debris are cleaned from each gap.
- We apply and tool the sealant to the product’s tested detail.
- We record what was done and flag anything that needs a different system.
Preparing for the visit
- For indoor joints, keep the area dry beforehand if you can
- For business premises, tell us about site rules or sign-in
- Mention any leaks or damp you’ve noticed
How to get a quote
There’s no standard price list. Instead, we give you a clear price for your job. To get started, email us at info@mrmastic.co.uk.
Read more
How we quote for fire rated sealant
Some jobs are bigger than they look, and some smaller. The main factors:
- How much there is to do
- How many rooms, windows or areas are involved
- Whether old sealant or filler has to be cut out
- The type of sealant required
There are no prices on our website, because each job is priced on what it involves. For a quick quote, please email us at info@mrmastic.co.uk.
What we need to know
A few details help us give you an accurate quote. When you ask for a quote, tell us:
- Whether it has been sealed before
- How many joints, rooms or windows are involved
- Where the property is
- What’s wrong with the joints now
Call for a quick quote, or send an email if you’d rather. Tell us about the joints that need doing and we’ll talk you through the work.
DIY sealant or a professional job?
What a professional job adds is preparation and the right product. We take joints back to clean, dry surfaces, and the sealant is matched to the joint and its conditions.
If you are set on DIY, put the effort into preparation: take out all the old sealant, make sure the joint is clean and dry, and give it the full cure time. If it doesn’t work out, we can still put it right.