Surrey · England
External & façade joints in Shipley Bridge, Surrey
Our applicators work in Shipley Bridge on sealing brickwork movement joints, render, cladding and façade joints. Old material cut out, joints cleaned and sealed neatly and every job guaranteed for a year.
- Water getting into walls through failed joints
- Joints where the bead has come unstuck
- Old sealant gone brittle and cracked
Shipley Bridge buildings and the weather
London and the South East are among the drier parts of the UK, but outside sealant still needs a dry, clean surface, so outdoor work is planned around the forecast.
If you live in an older home near Church of St Bartholomew, an extension built onto an older house moves differently, and the joint between them takes the strain. Schools such as Forge Wood Primary School are buildings too, and movement joints, cladding joints and gutters on larger buildings need the same care as a house’s.
Shipley Bridge is about 2 miles south-east of Horley, in Surrey. Wherever you are in the RH6 postcode area, our applicators can take on external mastic. Our area takes in 395 places across Surrey, large and small.
Our applicators cover all of the RH6 postcode area for external mastic and the streets around it. We cover properties on Antlands Lane, Antlands Lane East and Peeks Brook Lane and the roads around them. Nearby, we also carry out external mastic in Burstow (1 mile north-east), Fernhill (1 mile north), Tinsley Green (1 mile south-west), Copthorne (1 mile south-east) and Forge Wood (1 mile south-west). Further out, we also cover Epsom (14 miles north-west), Redhill (6 miles north), Ewell (15 miles north), Reigate (7 miles north-west), Caterham (10 miles north) and Dorking (10 miles north-west).
Landmarks near Shipley Bridge
Locally, jobs take us to homes and businesses close to Oakwood School, Worth Park Gardens and The Gatwick School. Shipley Bridge’s nearest station is Gatwick Airport station, roughly 1.2 miles north-west of the centre. Other landmarks nearby include Effingham Park Motor Museum (2.1 miles east) and County Mall (3.2 miles south-west). For a walk, there’s Hedgecourt Lake.
External mastic in Shipley Bridge, done properly
Getting the depth right is half the job. Closed-cell backing rod sets the depth and stops the sealant sticking to the back, so it bonds to the two sides only and can stretch. If you have brick movement joints where the sealant has split and failed seals between different materials, we can help.
Around Shipley Bridge, older buildings can be stone, brick or timber-framed, many with extensions added later. Where one material meets another is where water usually gets in, and they need the right sealant at the right depth.
All of our work is guaranteed for twelve months.
- Where
- Shipley Bridge (RH6)
- Wider area
- Surrey
- Guarantee
- A year, on every job
- Quote
- A clear price before any work starts
- Telephone
- 0345 464 0079
- Updated
- 26 October 2026
Also near Shipley Bridge
Also in Shipley Bridge
Questions from Shipley Bridge
Can you do external mastic in Shipley Bridge?
Yes. We work across London and the South East, and Shipley Bridge is part of that. Just phone 0345 464 0079 or send us an email with a few details of the job.
Do you cover smaller places like Shipley Bridge?
Yes, Shipley Bridge is covered. We work across London and the South East, and smaller places are part of that. Longer journeys are simply planned in advance.
Can you quote for more than one area?
Yes. More than one area can be quoted together.
What should I tell you?
Only a few details: where it is, what you’ve noticed and how we reach it. Then phone 0345 464 0079 or send us an email.
What colours does the sealant come in?
We aim for a joint that suits the wall rather than one that jumps out. We will talk through colour options before we start, matched as closely as the range allows.
What sealant do you use?
Each joint gets the product that suits it. Where it moves, gets wet or faces the weather makes a difference.
When is the sealant fully cured?
Most sealants are touch-dry well before they’re fully cured. We will give you the cure time for the product we used.
Do the sealants smell?
There can be a smell while the sealant cures, but it fades. Ventilation helps.
Can I do it myself?
Some jobs are best left to a professional: work at height, external movement joints, fire-rated sealant and large areas call for the right materials, safe access and experience.
If you’ve already had a go yourself, that is fine. We remove it and do the joint properly, so tell us about it when you ask for a quote.
Looking after it afterwards
Joint life depends on how it’s used and looked after. We suggest:
- Check the sealant is paintable before painting near it
- Act on the first splits you see
- Check external joints each spring
- Keep water from gutters off the wall
Keep pressure washers away from the sealant. A strong jet can damage the edges of the bead over time.
If you can see gaps, plants or bare sections in a joint, have it checked. Earlier resealing means a smaller job and a better result.
What we do, step by step
Most of a good job is in the preparation, so that is where we spend the time. Joints are cleaned back and dried before anything new goes in. In total, it generally takes a few hours for a handful of joints, longer for a whole elevation. Somewhere like Shipley Bridge needs a little journey planning: tell us about narrow lanes, gates, long drives and where we can park. Everything for the job comes with us, so a second trip is avoided where possible.
- Each joint is checked and the colour of the new sealant agreed.
- We take out the old sealant until the faces are sound.
- Backing rod goes in so the sealant can stretch between the two faces.
- We prime the faces where required.
- A low-modulus exterior sealant is gunned in and tooled to a neat finish.
Before we arrive
- Tell us if parking is tricky
- On commercial sites, let us know about site rules
- Keep children and pets away from the work area
How to get a quote
If you’re in Shipley Bridge and need external mastic, phone 0345 464 0079 or email us. Tell us what the problem is and where, and you will get a clear quote before we start.
Advice
Do you need external mastic in Shipley Bridge?
If plants are growing out of a joint, the sealant has usually failed or was never there. Roots and dirt hold water against the wall and speed up the damage.
Look out for these signs:
- Movement joints filled with mortar instead of sealant
- Weeds or debris growing in open joints
- Weathered mastic that no longer stretches
- Failed sealant between panels on a façade
For landlords with property near Gatwick Airport station, failed wall and movement joints let damp in, so they’re worth checking between tenancies.
Before you book anyone
- Is VAT in the price?
- Are they insured?
- How hidden problems are handled
- Who does the work, and how experienced they are
What we can’t put right
We’d rather tell you now than do work that will not last, so here’s what sealant can’t put right:
- Walls that need new movement joints cut into them
- Cracked brickwork or render that needs a builder or plasterer
- Render that’s blown, hollow or coming away
Not sure which it is? You can phone 0345 464 0079 or email us and we’ll tell you honestly.
Surfaces we seal
- Copings & trims
- Brickwork movement joints
- Façade panels
- Joints between brick and frames
- Render & cladding joints
- Concrete & block
How we quote for external mastic
For a quick quote, just ask. What matters most is:
- Whether old sealant or filler has to be cut out
- Which sealant suits the joint
- When we can work, for business premises
- Access and height
Commercial jobs are quoted on the same basis as homes: the amount of work, the access and the products needed, plus any working-time requirements on site. Ask us for a quote and we will go through it with you.
What to tell us for a quote
A few details help us give you an accurate quote. When you ask for a quote, tell us:
- Any access issues, like height or stairs
- Pictures of the joints, sent by email
- The problem you’ve noticed
- The rough size of the job
To get a quote, phone 0345 464 0079 or send us an email and tell us where the job is and what the problem looks like. We will give you a clear quote before any work starts.
Why act early in Shipley Bridge
Mortar or ordinary filler might look like a quick way to close an open joint, but it stops the joint moving. The wall then cracks somewhere else. The correct repair is a flexible sealant with the right backing. Around Shipley Bridge, older homes often have timber in their floors and frames, where water from a failed joint can cause rot if it’s left.
What it costs depends on the size of the job, how much old material has to come out and how easy the joints are to reach. You will have a clear quote before any work starts, so you know where you stand.
Why book with us
- 180+ five-star Google reviews
- You choose the colour before work begins
- More than 20 years in sealant work
- Experience in homes, commercial sites and hotels
Take a look at how sealant jobs are priced and what customers say.