Aberdeenshire · Scotland
Roadside of Kinneff External Mastic
Specialist external mastic for Roadside of Kinneff: the right sealant, proper preparation and a neat finish. Call for a quick quote.
- Gaps where render, brick and frames meet
- Panel joints letting water in
- Sealant pulling away from one side of the joint
External mastic in Roadside of Kinneff, done properly
Movement joints let brickwork, render and cladding expand and shrink without cracking. Its sealant has to flex with the building, season after season, so once it splits or hardens, the joint stops working and water gets in. We’re often asked to deal with old sealant gone brittle and cracked and sealant that has lost its bond to the brick or render, across façade panels, concrete & block and joints between brick and frames.
Stone walls need a stone-friendly sealant, as acetoxy products can attack some stone. Newer houses need their movement joints and roofline trims kept sound.
You are covered for a year from the day we finish. If anything isn’t right with it, drop us a line at info@mrmastic.co.uk.
- Where
- Roadside of Kinneff (DD10)
- Wider area
- Aberdeenshire
- Cover
- One year on every job
- Quote
- A clear price before any work starts
- info@mrmastic.co.uk
- Updated
- 26 October 2026
What happens if it’s left?
Resealing a run of joints in one go is generally better than patching one at a time. They’ve weathered the same way, and access only has to be arranged once. Exposed walls in smaller Scottish places take a lot of wind and rain, and once water gets behind a failed joint, damp in stone or harled walls is slow to dry out.
Every job is a little different, so we quote each one individually. Size, access and the product the joint needs all play a part, and we will explain the quote if you ask.
Why us?
- Any old sealant cut out fully, not covered over
- Homes, businesses and hotels
- We are fully insured
- Over 20 years’ experience
Take a look at what affects the cost or our reviews.
How it works
On the day, we start by going over the job with you, so there are no surprises. We protect the surfaces around the joints before we start. Most jobs take a few hours to a few days, depending on the length of joint and the access. In smaller Scottish places, parking is usually less of an issue than access and distance. Let us know how to find you and how to reach the joints, and the visit is planned around that.
- We start by checking each joint, agreeing the ones to redo and how we’ll reach them.
- The old mastic and anything lodged in the joint is removed.
- The joint faces are cleaned and primed where the sealant needs it.
- Backing rod goes in next, setting the depth and keeping the sealant off the back of the joint.
- A flexible exterior sealant is applied and tooled in a colour to suit the wall.
How to prepare
- Mention any parking rules near the property
- Tell us about any water getting in
- Mention any tricky access
Ask for a quote
For a quote, send an email to info@mrmastic.co.uk and tell us where the job is and what the problem looks like. You’ll have a clear quote before any work starts.
Read more
When something else is needed
To be straight with you, there are a few things sealant will not fix:
- Subsidence or other structural problems
- Loose or hollow render, which needs re-rendering
- Rising or penetrating damp from elsewhere in the wall
Not sure which it is? You can email us at info@mrmastic.co.uk and we will tell you honestly.
Joints and surfaces we work on
- Brickwork movement joints
- Joints between brick and frames
- Render & cladding joints
- Concrete & block
- Copings & trims
- Façade panels
Roadside of Kinneff: your questions answered
Do you cover smaller places like Roadside of Kinneff?
Yes. Roadside of Kinneff is within the area we cover, which takes in towns, villages and rural addresses. Our work covers the whole of Scotland. Just mention lanes, gates or anything else about the route when you book.
Can you do external mastic in Roadside of Kinneff?
Yes, Roadside of Kinneff is within the area we cover. We work across all of Scotland. You can email us at info@mrmastic.co.uk and tell us what needs doing.
How long before the joint can be used?
That depends on the sealant used, so follow the cure time we give you when we finish.
Which products do you use?
Quality sealants from brands including Arbo and Everbuild, picked for each joint. We’ll tell you what we’re using and why.
Can you do several jobs on one visit?
Of course. Doing several areas at once is usually more efficient, so mention them when you ask for a quote.
Will it make a mess?
Tidy work is part of the job. Nearby surfaces are protected, and the area is left clean when we finish.
Do I have to be there?
We need access to the joints, so we will agree that with you when we book. For inside work, that normally means someone being in.
Can you match the colour of my brickwork?
Exterior sealants are made in a range of colours, from greys and browns to whites and stone shades. We choose the closest to your brick or render.
For landlords and businesses
We regularly work with letting and managing agents. Send the address, what’s needed and the access arrangements.
A neglected joint can let water reach the structure, which is a bigger problem in a rented property. Keeping joints in good order is simple maintenance.
Signs you need external mastic in Roadside of Kinneff
Some movement joints have been pointed up with mortar. The joint cannot move, so the wall cracks somewhere else instead.
People normally contact us after spotting something like this:
- Rain getting behind render or cladding at a joint
- Rigid filler in a joint that should flex
- Sealant that has lost its bond to the brick or render
- Weeds or debris growing in open joints
For an older house near a landmark such as Kinneff And Catterline Parish Church, the joints between older walls, newer extensions and the roofline need a sealant that can move.
Questions to ask before you book
- When the joint can take water or movement
- Is the old sealant removed completely?
- Who does the work, and how experienced they are
- Whether they’re fully insured
External mastic in Roadside of Kinneff: local notes
Roadside of Kinneff is within about 2 miles of the coast, and homes near the sea take more wind-driven rain, with salt in the air closer to the shore. Both are hard on movement joints and outside wall joints, which can dry out and crack sooner where a building faces the weather. Private landlords in Scotland must meet the Repairing Standard, which includes keeping a home wind and watertight, and failed outside joints work against that.
Around Roadside of Kinneff, as everywhere, external mastic is only as good as the preparation behind it.
Roadside of Kinneff is about 14 miles north-east of Montrose, in Aberdeenshire. If you need external mastic in Roadside of Kinneff, please drop us a line at info@mrmastic.co.uk for a quick quote. We cover Aberdeenshire from our Crawley base, Roadside of Kinneff included. Our Aberdeenshire coverage runs to 161 places, and Roadside of Kinneff is one of them. Our Aberdeen page covers work nearby (19 miles or so).
We cover every part of the DD10 postcode area for external mastic. Close by, we work in Catterline (2 miles north-east), Inverbervie (3 miles south), Arbuthnott (3 miles west), Gourdon (4 miles south) and Drumlithie (4 miles north-west). We also work in nearby towns such as Montrose (14 miles south-west), Stonehaven (6 miles north), Banchory (15 miles north-west), Laurencekirk (9 miles south-west), Newtonhill (11 miles north) and St Cyrus (10 miles south-west).
Landmarks near Roadside of Kinneff
Other landmarks nearby include Woodcot Hospital (5.7 miles north) and Benholm Castle (4.7 miles south-west). Open spaces near Roadside of Kinneff include Carmont Hill.
Also near Roadside of Kinneff
What else we do in Roadside of Kinneff
DIY versus a professional finish
If you do try it yourself, take your time over the preparation: remove every trace of old sealant, clean and dry the joint, and follow the product’s cure time. If it fails, we can still redo it.
Not every job suits DIY: high-level joints, fire-rated gaps, external movement joints and big jobs call for the right materials, safe access and experience.
Keeping the joints in good condition
Looking after new joints is easy:
- Deal with leaking gutters that soak the joints below
- Make sure movement joints are not pointed over
- Show decorators and builders where the movement joints are
- Clear growth from the base of walls and joints
Keep the joints clear of soil, plants and climbing growth. Damp material against the sealant shortens its life.
Leave a failed movement joint and water keeps getting into the wall. That can lead to damp patches, staining and frost damage which cost more to put right than the joint.