Falkirk · Scotland
External & façade joints in Laurieston, Falkirk
Sealing brickwork movement joints, render, cladding and façade joints for Laurieston, backed by a one-year guarantee. Ask us for a quote.
- Movement joints filled with mortar instead of sealant
- Hard, crazed mastic that has stopped moving
- Damp patches traced to an open external joint
Surface by surface
Concrete and blockwork
Concrete and block walls shrink as they dry and move with temperature. Their movement joints are sealed over backing rod with a flexible sealant.
Joints between dissimilar materials
Different materials may need different primers. We prepare both faces so the sealant bonds properly.
External mastic in Laurieston
We cut out failed sealant, set the joint depth with closed-cell backing rod and reseal with a low-modulus exterior sealant. We pick a colour that sits well with the wall so the line blends in. We work on copings & trims, façade panels and render & cladding joints, and common reasons people get in touch are plants rooting in failed movement joints and rigid filler in a joint that should flex.
Stone walls need a stone-friendly sealant, as acetoxy products can attack some stone. On newer homes, the movement joints and roofline trims are what need watching.
Every job comes with a one-year guarantee, wherever you are in Falkirk.
- Where
- Laurieston (FK2)
- Wider area
- Falkirk
- Guarantee
- A year, on every job
- Quotes
- A clear quote up front
- info@mrmastic.co.uk
- Page updated
- 26 October 2026
Aftercare tips
Good habits help new joints last longer. A few tips:
- Fix overflowing gutters above sealed joints
- Have failed joints looked at early
- Leave the joints unpainted unless we’ve said otherwise
- Do not let climbing plants root in the sealant
Only paint over the joint if we’ve confirmed the sealant can take paint. Paint can crack on a flexible joint, and paint can crack as the joint moves.
Leave a failed movement joint and water keeps getting into the wall. Over time it can mean damp inside, stained render or frost-damaged brick.
Common questions in Laurieston
Do you work for landlords with property near Polmont station?
Yes. We work for letting agents and landlords as well as householders. You can email us at info@mrmastic.co.uk with the details for a clear quote.
Will you come out to Laurieston?
Yes, Laurieston is covered. Our work covers the whole of Scotland, and smaller places are part of that. The journey is planned ahead, so it helps to know about access.
Do you do commercial work?
Yes. We have worked for hotels, offices and other businesses and we’re fully insured.
When is the sealant fully cured?
Different products cure at different speeds, so please follow the time we give you when we finish.
Is it worth trying it myself?
Sometimes. Preparation is everything: all the old sealant out, and a clean, dry joint. We can always put it right if it fails.
Do you work at height?
It depends on the building. Tell us the height, the number of joints and what’s below them.
Is there a guarantee?
Yes. Each job is guaranteed for twelve months.
Can you match the colour of my brickwork?
We aim for a joint that suits the wall rather than one that jumps out. We’ll talk through colour options before any work starts.
For landlords and businesses
We regularly work with letting and managing agents. Tell us the address, the job and how access works.
Landlords and letting agents in Laurieston can book us as well as homeowners. Resealing between tenancies keeps a property looking cared for before the next move-in.
What happens on the day
We work through the job in order: protection first, then preparation, sealing and a tidy-up. Typically it takes a few hours for a handful of joints, longer for a whole elevation, and the area is left clean. Somewhere like Laurieston may be a longer drive, and the journey is planned ahead. Tell us about tracks, gates, a ferry crossing or anything unusual about getting there.
- We start by checking each joint, agreeing the ones to redo and how we’ll reach them.
- We cut out the failed sealant and rake out any dirt or growth.
- We clean both faces of the joint and prime them where the product calls for it.
- Backing rod goes in next, setting the depth and keeping the sealant off the back of the joint.
- A flexible exterior sealant is applied and tooled in a colour to suit the wall.
Before we arrive
- Mention any sign-in or site rules at work premises
- Clear items away from the joints we’re working on
- Let us know about stairs, lifts or work at height
Get a quote
Getting a quote is simple: tell us what needs doing and where, and roughly how big it is. A few pictures by email make the job easier to understand.
Related advice
Nearby places to Laurieston
What else we do in Laurieston
What we cannot put right
In fairness, some problems need a different trade:
- Cutting new joints into brickwork, which is building work rather than sealant work
- Damp from another source, such as a leaking gutter or a bridged damp-proof course
- Subsidence or other structural problems
If you’re not sure, just drop us a line at info@mrmastic.co.uk and we will give you a straight answer.
Joints and surfaces we work on
- Concrete & block
- Brickwork movement joints
- Copings & trims
- Façade panels
- Render & cladding joints
- Joints between brick and frames
Walls and rooflines in Laurieston
Laurieston is close to the coast, and homes near the sea take more wind-driven rain, with salt in the air closer to the shore. Both are hard on movement joints and outside wall joints, which can dry out and crack sooner where a building faces the weather. Harled (roughcast) walls are common in Scotland, and where harling meets frames, pipes and other materials, the joint needs a flexible sealant that grips a rough surface.
If you live in an older home near Christ Church Episcopal Church, older walls, gutters and the joints where extensions meet them need a flexible sealant. Letting a property close to Polmont station? Then failed wall and movement joints let damp in, so they’re worth checking between tenancies. Managing a site like Graeme High School? Then movement joints, cladding joints and gutters on larger buildings need the same care as a house’s.
Laurieston is about 1 mile south-west of Grangemouth, in Falkirk. Anywhere in FK2, we can carry out external mastic at your property. Laurieston is one of 50 towns and villages in Falkirk where we work for external mastic. Our Edinburgh page covers work nearby (21 miles or so).
All of FK2 is within our area for external mastic. Whether your property is on James Street, Mary Street and School Road or a nearby road, our applicators can take on the job. If you are just outside Laurieston, we cover Westquarter (1 mile south-east), Redding (1 mile south-east), Reddingmuirhead (1 mile south), Hallglen (1 mile south-west) and Wallacestone (1 mile south). Within a short drive, we also cover Bo'ness (6 miles east), Larbert (4 miles north-west), Stenhousemuir (3 miles north-west), Denny (7 miles west), Bonnybridge (5 miles west) and Kinneil (5 miles east).
Local landmarks in Laurieston
We work in homes and buildings around Callendar Park and Beancross Primary School, among other places. The nearest railway station is Polmont station, roughly 1.5 miles south-east. Nearby you’ll also find Carribber Castle (4.3 miles south-east) and Falkirk Community Hospital (1.7 miles west). Not far away are Callendar Lake.
What affects the quote in Laurieston
There’s no set price list. The quote depends on:
- How many rooms, windows or areas are involved
- Mould in or behind the old joints
- Whether the work is at height
- Any working-time requirements on site
What you pay reflects the work, not guesswork. That’s why we ask a few questions first.
Asking for a quote
Before you ask for a quote, have a think about:
- The address or postcode of the job
- Pictures of the joints, sent by email
- What the problem is, such as mould, gaps, leaks or cracking
- If someone has resealed it before
It all starts with a short chat. Tell us what’s wrong, where it is and how much there is. Whenever you’re ready, drop us a line at info@mrmastic.co.uk.
Can I do it myself?
Some jobs are best left to a professional: work at height, external movement joints, fire-rated sealant and large areas call for the right materials, safe access and experience.
If you are set on DIY, put the effort into preparation: remove every trace of old sealant, clean and dry the joint, and follow the product’s cure time. If it doesn’t work out, we can still put it right.