Highland · Scotland
External & façade joints in Kingussie, Highland
Specialist external mastic for Kingussie: the right sealant, proper preparation and a neat finish. Ask us for a quick quote.
- Water getting into walls through failed joints
- Rigid filler in a joint that should flex
- Panel joints letting water in
Keeping the joints in good condition
Aftercare is simple, and it makes a real difference:
- Keep movement joints as flexible joints, not mortar
- Check external joints each spring
- Avoid pressure-washing directly into sealant joints
- Deal with leaking gutters that soak the joints below
Avoid pressure-washing straight into the joints. A strong jet can damage the edges of the bead over time.
Water getting behind cladding or render can go unnoticed for a long time. When it finally shows inside, the joint may have been open for years so early resealing is worth it.
External mastic for homes and businesses in Kingussie
For buildings in Kingussie, we reseal external joints of all kinds, from brick movement joints to cladding panels. Every joint gets the same careful preparation: clean, sound faces and a controlled depth. We are often asked to deal with rain getting behind render or cladding at a joint and failed sealant between panels on a façade, on joints between brick and frames, concrete & block and copings & trims.
Stone walls need a stone-friendly sealant, as acetoxy products can attack some stone. On newer homes, the movement joints and roofline trims are what need watching.
There’s a 12-month guarantee on every job, large or small.
- Where
- Kingussie (PH21)
- Wider area
- Highland
- Guarantee
- One year on every job
- Quote
- A clear quote up front
- info@mrmastic.co.uk
- Page updated
- 26 October 2026
More services for Kingussie
DIY sealant or a professional job?
The biggest DIY mistake is sealing over old sealant. New silicone will not bond to old, so it lifts and traps water and mould underneath. Everything old must be removed first.
A careful DIYer can reseal a simple joint, such as a straightforward joint indoors. Where it goes wrong is sealing over the old bead, working on a wet joint or overloading the gap.
Why it’s worth doing now in Kingussie
Water gets in through a failed movement joint, behind render and cladding. Dealing with it early keeps the repair to the joint, instead of the wall and finishes around it. Exposed walls in smaller Scottish places take a lot of wind and rain, and once water gets behind a failed joint, damp in stone or harled walls is slow to dry out.
Combining jobs into one visit is normally more efficient than separate visits, so it’s worth mentioning everything you’d like done. You will get one clear quote for the whole job.
Why us?
- ARBOMaster approved applicator
- Sealant colour chosen to suit
- Arbo and Everbuild products
- We are fully insured
Read what affects the cost and customer reviews.
Work for landlords, hotels and businesses
We work for landlords and letting agents as well as householders. Resealing between tenancies keeps a property looking cared for.
In hotels, rooms out of use cost money, so we plan the work room by room around your bookings where we can. We’ve worked in hotels as well as homes and businesses.
External mastic in Kingussie: local notes
The west of Scotland is wetter than the east, so there’s plenty of rain for movement joints and outside wall joints to keep out. Plenty of Scottish homes have harled walls, and joints where harling meets other materials need a sealant that can grip and flex.
Rented homes near Kingussie station change hands often, and outside joints that have cracked can let damp into a rental, so check them between lets.
Kingussie is about 28 miles south of Inverness, in Highland. Anywhere in PH21, we can carry out external mastic at your property. Kingussie is one of 253 places in Highland we cover for external mastic. You can also see our page for Dundee, roughly 58 miles from Kingussie.
Our applicators cover all of PH21 for external mastic and the streets around it. That includes homes and businesses on High Street, East Terrace and Green Lane. Kingussie sits on or near the A86 and B970, which makes travel easy. Close by, we work in Newtonmore (3 miles south-west), Kincraig (6 miles north-east), Etteridge (7 miles south-west), Laggan (10 miles south-west) and Gergask (10 miles south-west). For island and remote addresses, the job takes a little more planning.
Around Kingussie
There’s a railway station in Kingussie itself: Kingussie station. Nearby you will also find Highland Folk Museum (2.2 miles south-west) and St Vincent's Hospital (less than half a mile north-west). Not far away are Creag Bheag and Loch Gynack.
Questions from Kingussie
Is Kingussie within the area you cover?
Yes, Kingussie is covered. Our work covers the whole of Scotland, from towns to the smallest places. Longer journeys are simply planned in advance.
Can you do external mastic in Kingussie?
Yes. Our work covers the whole of Scotland, and Kingussie is part of that. Just drop us a line at info@mrmastic.co.uk with a few details of the job.
Which products do you use?
Products from Arbo and Everbuild, among others, chosen to suit the joint. We explain the product when we quote.
How long before the joint can be used?
Different products cure at different speeds, so follow the cure time we give you when we finish.
Do the sealants smell?
Some sealants have a smell while they cure. Opening a window helps.
Can you seal over the old sealant?
No, because it fails. We remove every bit of old sealant first, so the new joint bonds to clean surfaces.
Do you guarantee your work?
Yes: twelve months. If anything is not right with the work within the year, let us know and we will sort it.
What do you need from me for a quote?
Only a few details: the address or postcode, what’s wrong and any access issues. Then email us at info@mrmastic.co.uk.
What we are called out for in Kingussie
A lot of failed joints come down to preparation: joint faces that were dusty or damp, unprimed where they needed it, or still carrying old sealant. The new sealant then lets go long before it should.
Most people get in touch when they notice one of these:
- Weathered mastic that no longer stretches
- Gaps where render, brick and frames meet
- Movement joints with cracked, split or missing sealant
- Movement joints filled with mortar instead of sealant
In and around Kingussie, as anywhere, good external mastic starts with a clean, dry, properly prepared joint.
What to look for in a quote
- When the joint can take water or movement
- Which colour the sealant will be
- Whether the sealant suits the joint
- Whether they seal over old material or remove it
How the visit works
Before we leave, we go over the finished joints with you and tell you how long to leave it. The work normally takes a few hours for a handful of joints, longer for a whole elevation, depending on the size of the job. Somewhere like Kingussie may be a longer drive, and the journey is planned ahead. Tell us about tracks, gates, a ferry crossing or anything unusual about getting there.
- We start by walking round the building and agreeing the joints and the access.
- We cut out the old mastic and rake out anything in the joint.
- The faces are brushed clean and primed where the product requires it.
- Backing rod sized to the joint goes in to set the depth.
- We apply the sealant, tool it and check the whole run.
Getting ready for the visit
- Clear items away from the joints we’re working on
- Tell us about access, such as stairs, a lift or high-level joints
- Tell us if parking is tricky
Get a quote
For a quick quote, get us on the phone, or email us if that’s easier. Describe what needs sealing and we will talk you through the work before giving you a price.
Read more
When it isn’t the sealant
It helps to know what we cannot do too:
- Subsidence or other structural problems
- Cracked brickwork or render that needs a builder or plasterer
- Rising or penetrating damp from elsewhere in the wall
If you are not sure, just email us at info@mrmastic.co.uk and we’ll give you a straight answer.
Joints and surfaces we work on
- Concrete & block
- Render & cladding joints
- Façade panels
- Joints between brick and frames
- Brickwork movement joints
- Copings & trims