Highland · Scotland
Kingussie New Build Mastic
Plot mastic for developers and snagging failed sealant in new homes for homes and businesses in Kingussie and across Highland. Fully insured, ARBOMaster approved and guaranteed for a year.
- Internal frame sealant that has split
- Sealant work across a run of new homes
- Cracks appearing as a new home settles
New build mastic in Kingussie, done properly
Failed shower seals, gaps along the skirting and messy beads are common items on a new-home snagging list. While the builder’s snagging or warranty period runs, report it to them first and if that stalls, we can do it. We work on windows & doors, plot handovers and show homes, and the jobs we see most are gaps behind new kitchen upstands and untidy sealant flagged on a snagging list.
New homes in smaller Scottish places are often single plots, self-builds or small developments. Each needs its sealant and floor joints finished as carefully as on a big site.
The work is covered for a year after we finish. If anything isn’t right with it, send an email to info@mrmastic.co.uk.
- Location
- Kingussie (PH21)
- Region
- Highland
- Guarantee
- 12 months on all our work
- Quotes
- A clear price before work begins
- info@mrmastic.co.uk
- Updated
- 26 October 2026
What we cannot put right
Some problems need a builder, plumber or other trade rather than us:
- Baths and trays that move too much for sealant to cope with
- Structural cracks in walls or ceilings
- Leaking fittings rather than failed sealant
If in doubt, send an email to info@mrmastic.co.uk and we will say what we think before you book.
Joints and surfaces we work on
- Show homes
- Kitchens
- Windows & doors
- Skirting & floors
- Plot handovers
- Bathrooms & en suites
What new build mastic looks like in Kingussie
Timber frame is common in newer Scottish homes, so skirting and sealant joints can open up as the building settles. The west of Scotland is wetter than the east, which means plot mastic and the sealant in new homes has to cope with a lot of rain.
If you’ve bought a new home near Kingussie station, the sealant around baths, showers and frames is worth checking in the first year or two. In and around Kingussie, as anywhere, good new build mastic starts with a clean, dry, properly prepared joint.
Kingussie is about 28 miles south of Inverness, in Highland. Anywhere in PH21, we can carry out new build mastic at your property. Kingussie is one of 253 towns and villages in Highland we cover. Our Dundee page covers work nearby (58 miles or so).
We work across the PH21 postcode area for new build mastic and the streets around it. If you need new build mastic at a property on High Street, East Terrace and Green Lane or anywhere close by, we can help. Kingussie sits on or near the A86 and B970, which makes travel easy. Other places close to Kingussie include Newtonmore (3 miles south-west), Kincraig (6 miles north-east), Etteridge (7 miles south-west), Laggan (10 miles south-west) and Gergask (10 miles south-west). For island and remote addresses, a little more planning is needed, so let us know when you get in touch.
What’s near Kingussie
There’s a railway station in Kingussie itself: Kingussie station. Other landmarks nearby include Highland Folk Museum (2.2 miles south-west) and St Vincent's Hospital (less than half a mile north-west). The countryside around Kingussie includes Creag Bheag and Loch Gynack.
Landlord and commercial work in Kingussie
Landlords and agents in Kingussie can book us as well as householders. Resealing between tenancies keeps a property looking cared for.
Failed sealant is one of the commonest items on a check-out report. We can quote for more than one property at once.
More services for Kingussie
The process
The work is kept neat and contained to the joints we are treating. The job normally takes anything from a few hours to several days, depending on the number of plots, and we tell you how long to leave it before we go. Around Kingussie, distance and access matter more than parking. Tell us how to find the property and how to reach the work.
- First, the list of joints is agreed from your snagging sheet or plot schedule.
- Every bit of the old builder’s sealant is cut out down to clean surfaces.
- We clean out the dust and grit left from the build.
- Primer goes on where the surface and product need it, then the new sealant.
- Each bead is tooled and the cure times explained.
Before we arrive
- Mention if the joints have been sealed before
- Clear items away from the joints we’re working on
- Keep children and pets away from the work area
Ask for a quote
For a quote, email us at info@mrmastic.co.uk and tell us where the job is and what the problem looks like. We’ll send you a clear quote before any work starts.
Read more
DIY versus a professional finish
Some sealant jobs are within reach of a careful DIYer, such as a straightforward joint indoors. Where it goes wrong is sealing over the old bead, working on a wet joint or overloading the gap.
Sealing over old silicone is the commonest DIY error. Silicone doesn’t stick to old silicone, so it peels away and traps moisture behind it. Everything old must be removed first.
What affects the quote in Kingussie
We quote each job individually. These are the things that affect it:
- The number and length of the joints
- The product the joint needs
- The old material and how stubborn it is
- The number of rooms or windows
Commercial jobs are quoted on the same basis as homes: how much there is to do, how we reach it and what it needs. Call for a quick quote and we’ll explain what it covers.
Asking for a quote
The more you tell us, the more accurate the quote. When you get in contact, it helps to mention:
- The rough size of the job
- If someone has resealed it before
- The address or postcode of the job
- A few pictures by email, if you can
For new build mastic in Kingussie, drop us a line at info@mrmastic.co.uk. Tell us what the problem is and where, and we’ll agree the price before any work begins.
Common questions in Kingussie
Is Kingussie in your area for new build mastic?
Yes. Our work covers the whole of Scotland, and Kingussie is part of that. You can email us at info@mrmastic.co.uk and tell us what needs doing, and we will send you a clear quote.
I let a flat near Kingussie station. Can you help?
Yes. We work for landlords and letting agents as well as homeowners. Just send an email to info@mrmastic.co.uk with the address and what needs doing, and we’ll send you a clear quote.
How long before the joint can be used?
That depends on the sealant used, so please follow the time we give you when we finish.
What information do you need?
A short description and the location. We’ll ask anything else we need to know.
Do you work for developers?
Yes. We seal plots to the developer’s programme ready for handover. Tell us the plots and the joints involved for a clear quote.
Why has my new-build shower seal failed already?
A new house dries and settles for a year or two, and sealant is often rushed onto dusty, unprimed surfaces. Both lead to early failure.
Can new sealant go on top of the old bead?
No. We always remove the existing bead, the joint cleaned and primed where needed, before resealing.
What colour sealant will you use?
The colour is chosen to suit the tiles, worktop or frame. Tell us what you’d like when you get a quote.
Keeping the joints in good condition
So the new joints stay in good condition:
- Record problems with dated photos
- Open a window or run the fan after bathing
- Wait for the cure time before using a resealed shower
- Wipe joints with warm soapy water
Ventilation matters in a new home, which is still drying out. Use the extractor fan or open a window after showers so moisture does not sit on the sealant.
If a shower tray or bath seal splits in the first year, look for movement. Have it resealed, and the tray or bath checked, before it gets worse.
Why it’s worth doing now in Kingussie
The builder is usually the first port of call while the snagging or warranty period runs. If it’s slow, or the same joint keeps failing, a proper reseal from a specialist is the next step. In an older home around Kingussie, damp from a failed joint can get into timber and plaster.
Combining jobs into one visit generally makes better use of the time than several visits. You’ll get one clear quote for the whole job.
Why book with us
- Homes, businesses and hotels
- A 12-month guarantee on all work
- Sanitary silicone with an anti-fungal additive in wet areas
- Colour picked to suit the job
Take a look at what affects the cost and customer reviews.