Buckinghamshire · England
External & façade joints in Easington, Buckinghamshire
We cover Easington for sealing brickwork movement joints, render, cladding and façade joints. Old material cut out, joints cleaned and sealed neatly and a 12-month guarantee.
- Damp patches traced to an open external joint
- Brick movement joints where the sealant has split
- Sealant pulling away from one side of the joint
How we handle external mastic in Easington
As ARBOMaster approved applicators, we choose exterior sealants to suit the joint and the surfaces. Porous or awkward surfaces are primed where the sealant needs it, and we do not skip that step. Common call-outs are for failed seals between different materials and sealant pulling away from one side of the joint, across brickwork movement joints, façade panels and concrete & block.
In a village or hamlet like Easington, older cottages and farm buildings often stand in the open, where walls and rooflines take the weather head on. Joints on those walls need a sealant that moves with the building and stays in place.
All of our work is guaranteed for twelve months, in Easington and everywhere else we cover.
- Where
- Easington (HP18)
- Wider area
- Buckinghamshire
- Cover
- 12 months on all our work
- Price
- A clear quote up front
- Phone
- 0345 464 0079
- Last updated
- 26 October 2026
What the job involves on each surface
Concrete and blockwork
Big joints in concrete need careful depth control. Backing rod sized to the joint sets it so the sealant isn’t too deep.
Joints between dissimilar materials
Different materials may need different primers. We prepare both faces so the sealant bonds properly.
Nearby places to Easington
Other services in Easington
What we’re called out for in Easington
Sometimes a movement joint was filled with mortar or a rigid filler, often by someone who didn’t know what it was for. With the joint locked solid, the movement turns into cracks elsewhere in the wall.
Look out for any of the following:
- Movement joints filled with mortar instead of sealant
- Damp patches traced to an open external joint
- Gaps where render, brick and frames meet
- Sealant pulling away from one side of the joint
If you let a flat or house near Haddenham & Thame Parkway station, failed wall and movement joints let damp in, so they’re worth checking between tenancies.
Questions to ask before you book
- Whether they’re fully insured
- Whether they seal over old material or remove it
- How hidden problems are handled
- What guarantee comes with the work
FAQs for Easington
I let a flat near Haddenham & Thame Parkway station. Can you help?
Yes, landlords and agents are among the people we work for. Just ring 0345 464 0079 or email us with the address and what needs doing, and we will give you a clear quote.
Is Easington within the area you cover?
Yes. Easington is within the area we cover, which takes in towns, villages and rural addresses. We work across London and the South East. Let us know about access, parking and anything unusual about getting there when you book.
Do you work for hotels and businesses?
Yes. Larger jobs can be planned room by room or area by area to suit the site.
Where do you work from?
We work from Crawley. We cover Easington and the rest of Buckinghamshire.
How do I get a quote for external mastic in Easington?
The cost depends on the size of the job, access and how much old sealant has to come out. Ask us for a quote.
When is the sealant fully cured?
Different products cure at different speeds, so please follow the time we give you.
Is it messy?
We keep the work tidy. We protect what’s around the joints.
Are you ARBOMaster approved?
Yes. We’re approved under the ARBOMaster scheme, which is run for the Arbo sealant brand.
Quotes for external mastic in Easington
You will get a clear quote before we start. It’s based on:
- When we can work, for business premises
- Whether the work is at height
- Which sealant suits the joint
- Whether old sealant or filler has to be cut out
The cost reflects the work involved, not a rough estimate. That is why we ask about the job first and give you a clear quote before we start.
Asking for a quote
You don’t need to know the technical terms. It helps if you can tell us:
- Pictures of the joints, sent by email
- Any access issues, like height or stairs
- The address or postcode of the job
- Roughly how big the job is
It all starts with a short chat. Tell us what’s wrong, where it is and how much there is, and we will talk you through what we’d do. Whenever you’re ready, call 0345 464 0079 or drop us an email.
Landlords, agents and businesses in Easington
Whether it’s one flat or a portfolio, you get the same standard of work: the old material taken out, careful preparation and a 12-month guarantee.
Water getting past a failed joint can damage the building, which is a bigger problem in a rented property. Resealing at the right time is simple maintenance.
What we do, step by step
When we get to you, we check the joints match what you told us. If anything is different, we explain it before carrying on. Most jobs then take a few hours for a handful of joints, longer for a whole elevation. For a village or hamlet like Easington, the journey is planned in advance: let us know about lanes, gates and parking. Everything for the job comes with us, so a second trip is avoided where possible.
- We inspect the joints and agree which need resealing and how they’ll be reached.
- We cut out the failed sealant and rake out any dirt or growth.
- We clean both faces of the joint and prime them where the product calls for it.
- Closed-cell backing rod is fitted to set the depth and stop three-sided bonding.
- The new sealant, chosen to suit the brick or render, is applied and tooled to a neat finish.
How to prepare
- Move anything stored near the joints
- Tell us about any water getting in
- Plan for the work area to be out of bounds to pets and children
Ask for a quote
Getting a quote is simple: tell us what needs doing and where, and roughly how big it is. Photos by email help us understand the job.
Read more
What external mastic looks like in Easington
The South East is one of the drier parts of the UK, but outside sealant still needs a dry, clean surface, so outdoor work is planned around the forecast. With historic houses such as Boarstall Tower (about 4.6 miles north-west) nearby, there’s older building stock in the area around Easington as well as newer homes. Where a home is older, older brick and stone need a sealant that suits them, at the right joint depth.
For an older house near a landmark such as Parish Church of St Mary, older walls, gutters and the joints where extensions meet them need a flexible sealant. Managing a site like Long Crendon School? Then its movement joints, gutters and trims need looking after like any other building’s.
Easington is about 3 miles north-west of Thame, in Buckinghamshire. Homes, rented property, offices and hotels in Easington is covered for external mastic, old or new, large or small. The work is guaranteed for a year. We cover 263 towns and villages across Buckinghamshire. There’s also a page for Oxford, roughly 10 miles from Easington.
Work in HP18 is quoted and booked the same way as anywhere else. External mastic is available to properties on Easington Lane and Chilton Road and the roads around them. If you’re just outside Easington, we cover Chilton (1 mile north), Shabbington (2 miles south-west), Little Ickford (3 miles south-west), North Weston (3 miles south) and Ickford (3 miles south-west). Within a short drive, we also cover Aylesbury (8 miles east), High Wycombe (15 miles south-east), Buckingham (15 miles north), Elmhurst (9 miles east), Southcourt (8 miles east) and Princes Risborough (9 miles south-east).
Local landmarks in Easington
Locally, jobs take us to homes and businesses close to The Mole & Chicken pub, among other places. Easington’s nearest station is Haddenham & Thame Parkway station, about 2.9 miles south-east of the centre. Other landmarks nearby include Thame Community Hospital (3.3 miles south-east) and Dinton Castle (4.9 miles east). The countryside around Easington includes Snakemoor.
Looking after it afterwards
Joint life depends on how it’s used and looked after. Here’s what we suggest:
- Keep water from gutters off the wall
- Walk round the building once a year and look at the joints
- Avoid pressure-washing directly into sealant joints
- Tell anyone working on the walls about the movement joints
Only paint over the joint if we have confirmed the sealant can take paint. Paint can crack on a flexible joint.
Gaps, plants or missing sealant in a joint are worth getting looked at. Early work is quicker and leaves a better finish.
DIY sealant or a professional job?
Some jobs are best left to a professional: high-level joints, fire-rated gaps, external movement joints and big jobs need the right product, the right access and the right method.
Too much sealant is as bad as too little. A thick, smeared bead looks untidy and does not move well, and the joint depth matters as much as the finish.