Moray · Scotland
External Mastic in Burghead
External mastic for Burghead, by sealant specialists with 20+ years’ experience. Rated 4.9 on Google from 180+ five-star reviews.
- Water getting into walls through failed joints
- Sealant that has lost its bond to the brick or render
- Gaps where render, brick and frames meet
Should I try it myself first?
If you do try it yourself, take your time over the preparation: take out all the old sealant, make sure the joint is clean and dry, and give it the full cure time. If it doesn’t work out, we can still put it right.
Not every job suits DIY: work at height, external movement joints, fire-rated sealant and large areas call for the right materials, safe access and experience.
External mastic in Burghead, done properly
A movement joint is only as good as its depth. Closed-cell backing rod sets the depth and stops the sealant sticking to the back, so it bonds to the two sides only and can stretch. Typical jobs include leaking joints around cladding and façade panels and gaps where render, brick and frames meet, on joints between brick and frames, façade panels and concrete & block.
Outside joints can only be sealed when they’re dry, so work in Burghead depends on the weather, and longer journeys are planned in advance. Let us know about access to every wall and roofline.
The work is guaranteed for twelve months. If there’s a problem with our work within the year, let us know and we will sort it.
- Where
- Burghead (IV30)
- Wider area
- Moray
- Cover
- One year on every job
- Quotes
- A clear quote up front
- info@mrmastic.co.uk
- Last updated
- 26 October 2026
What the job involves on each surface
Copings and trims
Coping and trim joints face rain and sun head on. We reseal them with an exterior sealant suited to the material.
Brickwork movement joints
Vertical joints in long brick walls let the brickwork expand without cracking. They’re resealed over backing rod with a low-modulus sealant.
Quotes for external mastic in Burghead
We quote each job individually. These are the things that affect it:
- Whether the work is at height
- The product the joint needs
- Any working-time requirements on site
- How many areas need sealing
What it costs depends on how much there is to do, how much old material has to come out and how easy the joints are to reach. You’ll have a clear quote before any work starts.
Asking for a quote
Photos by email are helpful but not essential. Try to tell us:
- The problem you’ve noticed
- Whether it’s a home or a business
- A few photos by email, if you can
- If someone has resealed it before
For a quote, send an email to info@mrmastic.co.uk with the location and a short description of the problem. You will have a clear quote before we start.
Questions from Burghead
Does living near the coast affect external mastic in Burghead?
Coastal homes put outside sealant through more weather than inland ones, so the choice of sealant and the preparation matter even more. Walls facing the sea are normally the first to need attention.
Do you cover smaller places like Burghead?
Yes, Burghead is covered. We work across all of Scotland, and smaller places are part of that. The journey is planned ahead, so it helps to know about access.
Can you do several jobs on one visit?
Yes, and it often makes sense. Doing several areas at once is usually more efficient, so mention them when you ask for a quote.
Will it make a mess?
Not at all. The area is protected while we work and cleaned up afterwards.
When will the joints need doing again?
There’s no fixed answer: joints on exposed walls or with a lot of movement age sooner. Check them each year and reseal when they split or harden. Every job carries our one-year guarantee.
How do I get a quote for external mastic in Burghead?
There’s no set price, as it depends on the job: how much there is, what’s there now, how we reach it and what it needs. You will get a clear quote before any work starts.
Are you ARBOMaster approved?
Yes. We’re an ARBOMaster approved applicator, the approved applicator scheme for Arbo sealants.
Should I point up the gap in my brickwork?
No, not if it’s a movement joint. Pointing it stops it working, and the wall may crack nearby. We’ll reseal it with a flexible sealant.
What sealant work can’t fix
A few problems are outside what sealant work can do:
- Damp that isn’t coming from the joint
- Movement that’s more than a sealant joint can take
- Cracking across the wall rather than at a joint
Not sure which it is? You can send an email to info@mrmastic.co.uk and we will tell you honestly.
Surfaces we seal
- Façade panels
- Joints between brick and frames
- Copings & trims
- Render & cladding joints
- Concrete & block
- Brickwork movement joints
Walls and rooflines in Burghead
Burghead is close to the coast, where wind-driven rain is a fact of life and, nearer the shore, so is salt air. Both are hard on movement joints and outside wall joints, which can dry out and crack sooner where a building faces the weather. Plenty of Scottish homes have harled walls, and joints where harling meets other materials need a sealant that can grip and flex.
Around Burghead, as everywhere, external mastic is only as good as the preparation behind it.
Burghead is about 7 miles north-west of Elgin, in Moray. Every kind of property in Burghead can book us for external mastic, old or new, large or small. The work is guaranteed for a year. Burghead is one of 58 towns and villages in Moray we cover. Our Aberdeen page covers work nearby, about 63 miles away.
We cover every part of IV30 for external mastic and the streets around it. If you need external mastic at a property on Station Road, Kinloss Street and Mcdonald Crescent or anywhere close by, our applicators can take on the job. With the B9013 and B9040 close by, Burghead is easy for our applicators to reach. Other places close to Burghead include Cummingston (1 mile east), Backlands (2 miles east), Hopeman (2 miles east), College of Roseisle (2 miles south-east) and Duffus (3 miles east). Within a short drive, we also cover Elgin (7 miles south-east), Forres (8 miles south-west), Lossiemouth (7 miles east), Ashgrove (8 miles south-east), Lhanbryde (11 miles south-east) and Kinloss (5 miles south-west). As one of the bigger places in Moray, Burghead has homes, rented property and businesses of every kind. For island and remote addresses, the job takes a little more planning, so let us know when you get in touch.
Around Burghead
Nearby you’ll also find Inverugie Castle (2.3 miles east).
Landlord and commercial work in Burghead
Failed sealant is one of the commonest items on a check-out report. Several properties can go on one quote.
We work for letting agents and landlords as well as householders. Resealing between tenancies is a simple way to keep a property in good order before the next move-in.
When to call us in Burghead
Poor preparation causes many early failures: joint faces that were dusty or damp, unprimed where they needed it, or still carrying old sealant. The new sealant then lets go long before it should.
Most people get in touch when they notice something like this:
- Water getting into walls through failed joints
- Sealant pulling away from one side of the joint
- Movement joints filled with mortar instead of sealant
- Gaps where render, brick and frames meet
For jobs in and around Burghead, choosing the right material for each joint is as important as a tidy finish.
Before booking anyone
- What guarantee comes with the work
- When the joint can take water or movement
- Who does the work, and how experienced they are
- Which sealant they’ll use, and why
Towns and villages near Burghead
More services for Burghead
How it works
You don’t need to clear the whole room or building before we come, only the area right around the joints. We protect the rest, and the job takes anything from a few hours to several days, depending on the building in most cases. Outdoor work around Burghead depends on the weather, as sealant needs a dry surface, so external jobs may need to move if the day turns wet. Work indoors isn’t affected.
- We start by walking round the building and agreeing the joints and the access.
- Every bit of old sealant and any mortar or debris is cut out.
- The faces are brushed clean and primed where the product requires it.
- We fit closed-cell backing rod to control the depth.
- We apply the sealant, tool it and check the whole run.
Getting ready for the visit
- Let us know about stairs, lifts or work at height
- Mention any sign-in or site rules at work premises
- Clear the area around the work
Getting a quote
Every job is quoted individually. Simply drop us a line at info@mrmastic.co.uk and describe the job and send photos if you have them.