Kent · England
Bathroom & kitchen resealing in Wye, Kent
Baths, showers and worktops in Wye need attention? We cut out the old, prepare the joints and apply the right sealant.
- Black mould in the silicone that will not clean off
- Failed sealant on the screen profile
- Leaks into the floor or ceiling below
Bathroom resealing around Wye
Most of the South East has hard water, which leaves limescale on sealant, grout and fittings.
If you let a flat or house near Wye station, mouldy sealant is one of the first things a new tenant notices, so it’s worth renewing between lets. If you live in an older home near Church of Saint Gregory and Saint Martin, timber floors under older bathrooms flex, so joints need a sealant that moves with them. Managing a site like Lady Joanna Thornhill Endowed Primary School? Then its toilets, changing areas and kitchens need their sealant renewed like any other building’s.
Wye is about 4 miles north-east of Ashford, in Kent. Whether you are in the middle of Wye or further out, we cover bathroom resealing for every kind of property. We cover 922 towns and villages across Kent, from the larger towns to small villages. We also work in Chelmsford, around 43 miles away.
All of TN25 is covered for bathroom resealing, from the main roads to the quietest streets. Whether your property is on High Street, Church Street and The Green or a nearby road, our applicators can take on the job. Neighbouring places we cover for bathroom resealing include Kempe's Corner (1 mile west), Boughton Corner (1 mile north-west), Boughton Aluph (1 mile north-west), Brook (2 miles south-east) and Folly Town (2 miles south-east). We also work in nearby towns such as Ashford (4 miles south-west), Canterbury (9 miles north-east), Sittingbourne (14 miles north-west), Folkestone (12 miles south-east), Whitstable (12 miles north) and Faversham (9 miles north).
Near you in Wye
In Wye, that means homes and buildings near The New Flying Horse pub, Wye School and Wye School and the streets around them. Wye has its own railway station: Wye station. Nearby you’ll also find County Square (3.8 miles south-west) and William Harvey Hospital (3.1 miles south). For a walk, there’s Hatch Park.
How we handle bathroom resealing in Wye
Across Wye, the joints we reseal are the ones that fail in any home: the long edge of the bath, the base of the shower tray, the back of the basin and the line along the worktop. Every joint is cut out, cleaned and left dry before it’s resealed. If you have a messy, uneven bead from a previous reseal and failed sealant on the screen profile, we can help, whatever the surface.
Somewhere as small as Wye, homes tend to be cottages, farmhouses or converted buildings, with some newer houses too. Movement in older walls and floors tends to show first as cracked grout or split sealant.
We guarantee the work for a year. If there’s a problem with our work within the year, let us know and we will sort it.
- Where
- Wye (TN25)
- Region
- Kent
- Cover
- One year on every job
- Quotes
- Quoted before any work starts
- Phone
- 0345 464 0079
- Updated
- 26 October 2026
What affects the quote in Wye
There’s no set price list, because jobs vary so much. The quote depends on:
- How many areas need sealing
- How easy the joints are to reach
- The old material and how stubborn it is
- Any mould that needs treating
Homes and businesses are quoted the same way: the amount of work, the access and the products needed. Call for a quick quote and we will go through it with you.
Helping us quote
Before you ask for a quote, have a think about:
- Whether it’s a home or a business
- Photos by email, if that’s easy
- The address or postcode of the job
- The rough size of the job
There’s no standard price list, because every job is different. Instead, your job gets its own clear quote. To get started, call 0345 464 0079 or send us an email.
Keeping the joints in good condition
Joint life depends on how it’s used and looked after. Here’s what we suggest:
- Squeegee the walls and tray after use
- Use gentle cleaners on the silicone
- Check the joints every few months for splits or lifting
- Keep scourers and sharp tools away from the bead
Don’t stand bottles along the bead, as they hold water against it. A quick squeegee after showering keeps water from sitting on the joint.
Do not wait for a refit to deal with failed sealant. Like paintwork, sealant needs renewing from time to time, and replacing it when it fails protects the rest of the room.
Why act early in Wye
A clean new bead makes a room look cared for, which helps when a home is being let or put on the market. A smeared, uneven DIY bead does the opposite. Older cottages and farmhouses around Wye can have timber floors and frames, and water through a failed joint can rot timber if it’s left.
We do not show prices on the website, because each job is priced on what it involves. Call for a quick quote.
Why book with us
- You choose the colour before work begins
- Old sealant always removed completely
- A 12-month guarantee on all work
- Arbo and Everbuild products
Different surfaces, different methods
Kitchen worktops & upstands
Upstands and back edges are cut out, cleaned of grease and resealed, since cooking leaves a film that stops silicone sticking. Proper degreasing is what helps the new joint last.
Shower trays & enclosures
Water often gets past the wall profile of a shower enclosure. It’s resealed along with the tray joints, sealing the side the enclosure’s instructions call for.
Should I try it myself first?
The biggest DIY mistake is sealing over old sealant. Silicone doesn’t stick to old silicone, so it peels away and traps moisture behind it. Everything old must be removed first.
What a professional job adds is preparation and the right product. We take joints back to clean, dry surfaces, and the sealant is chosen for how the joint moves and where it is.
Towns and villages near Wye
Other services in Wye
What we do, step by step
On the day, we start by going over the job with you, so you know exactly what we are doing. Surfaces next to the work are protected before any work begins. Most jobs take half a day or less for one room, longer when the kitchen is included. For a village or hamlet like Wye, the journey is planned in advance: let us know about lanes, gates and parking. Everything for the job comes with us, so a second trip is avoided where possible.
- First, each joint is checked for movement and signs of water.
- Every trace of the old bead is removed, including the thin smear on the tiles.
- The joint is cleaned, degreased and treated for mould.
- When the joint is dry, and a bath has been filled with water, the new silicone goes on.
- We tool the bead to a neat finish and give you the cure time, normally around 24 hours.
Getting ready for the visit
- Let us know if you’ve seen damp or leaks
- For business premises, tell us about site rules or sign-in
- Let us know about stairs, lifts or work at height
Ask for a quote
Getting a quote is simple: let us know the job and the location. Photos by email help us understand the job, and we will take it from there.
Read more
Your questions about bathroom resealing in Wye
Is Wye in your area for bathroom resealing?
Yes, Wye is within the area we cover. Our work covers London and the South East. Just ring 0345 464 0079 or drop us an email with a few details of the job.
Will you come out to Wye?
Yes, we do. We work across London and the South East, and smaller places are part of that. Longer journeys are simply planned in advance.
Is there any odour?
That depends on the sealant. Some smell for a while, some hardly at all.
How long before the new sealant can get wet?
After around 24 hours in most cases. You will get the exact cure time before we leave.
How do I get a quote for bathroom resealing in Wye?
Size, access and the old material all affect the cost. Call for a quick quote.
Do you work for landlords and businesses?
Yes. As well as homeowners, we work for landlords, agents, businesses and hotels in Wye.
My sealant has gone black. Can you sort it?
Yes, by replacing the sealant. Cleaning products may lighten it, but the lasting fix is new anti-fungal silicone on a clean, treated joint. Good ventilation helps keep it away.
Is it messy?
We keep the work tidy. We protect what’s around the joints, and the area is left clean when we finish.
What we cannot put right
It helps to know what we cannot do:
- Damage behind the tiles that needs a tiler
- Water coming from the plumbing rather than the joint
- A bath or tray that moves because it is not properly supported
If you’re not sure, just call 0345 464 0079 or email us and we’ll give you a straight answer.
Surfaces we seal
- Baths
- Basins & vanity units
- Sinks & splashbacks
- Shower trays & enclosures
- Kitchen worktops & upstands
- Wet rooms