Greater London · England
Wimbledon Bathroom Resealing
Problem with your baths, showers and worktops in Wimbledon? We remove the old material, prepare the joints and seal them properly.
- Leaks into the floor or ceiling below
- Water escaping at the shower enclosure
- Sealant that has split, shrunk or peeled away
How we handle bathroom resealing in Wimbledon
It isn’t only bathrooms. The joint between worktop and wall, the edge of the sink and the bottom of the splashback get wet every single day, and water behind a laminate worktop can make it swell. Kitchen joints get a sealant suited to kitchens, colour-matched where it shows. If you have a bead that has pulled away from the tiles and failed sealant on the screen profile, we can put it right, whatever the surface.
London’s water is hard, so limescale builds up along sealant lines, in grout and on fittings. For a bathroom or kitchen in Wimbledon, getting the joints right keeps water where it belongs and the room looking clean.
Each job carries a 12-month guarantee, whatever its size.
- Location
- Wimbledon (SW19, SW20, SW17, SW18)
- Region
- Greater London
- Cover
- A year, on every job
- Price
- A clear price before any work starts
- Phone
- 0345 464 0079
- Last updated
- 26 October 2026
When something else is needed
A few problems are outside what sealant work can do:
- Loose or hollow tiles, or failed tanking behind them
- Cracks in the tray itself rather than the joint
- Cracked or missing grout between tiles (that’s regrouting)
If you’re not sure, just phone 0345 464 0079 or send us an email and we’ll give you a straight answer before booking.
What we seal
- Kitchen worktops & upstands
- Baths
- Shower trays & enclosures
- Wet rooms
- Basins & vanity units
- Sinks & splashbacks
Landlord and commercial work in Wimbledon
We also work for businesses, from offices to washrooms and kitchens. On commercial sites, working times can be discussed when we quote.
Failed sealant is one of the commonest items on a check-out report, and it’s quick to put right between tenancies. Several properties can go on one quote.
Should I try it myself first?
The biggest DIY mistake is sealing over old sealant. New silicone will not bond to old, so it lifts and traps water and mould underneath. All the old material has to come out first.
A careful DIYer can reseal a simple joint, such as a straightforward joint indoors. The common mistakes are sealing over old sealant, sealing a damp joint and using far too much.
What we do, step by step
We bring everything the job needs with us, so you don’t need to buy or prepare anything. Once we’ve agreed what’s being done, we protect the area and start. Most jobs take a couple of hours for a single bath or shower. In a London area like Wimbledon, the main things to plan are parking and access: let us know about parking, the floor we will be working on and any lift or shared entrance.
- First, each joint is checked for movement and signs of water.
- The old silicone is cut out completely, along with the film it leaves on the tiles.
- Joints are degreased and any mould is treated.
- With the joint dry, and any bath loaded with water, a single bead of anti-fungal silicone is applied.
- The bead is tooled smooth and you’re told the cure time, normally around 24 hours.
Preparing for the visit
- Tell us about any previous sealing or DIY attempts
- On commercial sites, let us know about site rules
- Tell us about any water getting in
Ask for a quote
Want a quote for bathroom resealing? Please ring 0345 464 0079 or send us an email and tell us about the job. We’ll explain what we’d do and give you a clear quote before we start.
Related advice
Common problems we fix in Wimbledon
Plenty of failed sealant has been laid over the top of older sealant. Fresh silicone can’t grip the old bead underneath, so it lifts, lets water in and traps mould underneath.
People generally contact us after spotting something like this:
- Lumpy, uneven sealant from a DIY attempt
- Leaks into the floor or ceiling below
- Failed sealant on the screen profile
- Mouldy sealant that has gone black
If you let a flat or house near Wimbledon station, fresh sealant around the bath, shower and sink between tenancies helps a property present well and keeps leaks at bay.
Comparing quotes
- Which colour the sealant will be
- Are they insured?
- How long the guarantee is
- Is the old sealant removed completely?
Bathroom resealing around Wimbledon
There are hotels and other places to stay in and around Wimbledon. As well as homes, we work in hotel bathrooms, where resealing and regrouting can be done room by room. In a London flat, water from a failed bath or shower seal can reach the neighbours below, so tired sealant is best dealt with early.
Wimbledon is in London, so parking needs planning: tell us about permits, visitor bays or off-street space when you book. If you look after a building such as Wimbledon High School, we reseal washrooms and kitchens in schools and businesses as well as homes.
Wimbledon is about 7 miles south of City of Westminster, in Greater London. Jobs in Wimbledon get the same care as everywhere else we work: the old material taken out, joints prepared properly and a 12-month guarantee. Across Greater London, we cover 764 places, Wimbledon among them. Our London page covers work nearby, about 7 miles away.
We work across the SW19, SW20, SW17 and SW18 postcode area for bathroom resealing. You’ll find streets such as High Street Mews, High Street and Church Road, all of which we cover. You will find Wimbledon on the A218 and B235, so it’s easy for us to get to with everything needed for bathroom resealing. Neighbouring places we cover for bathroom resealing include Crooked Billet (1 mile west), Wimbledon Park (1 mile north), Wimbledon Chase (1 mile south), Copse Hill (1 mile south-west) and Merton Park (1 mile south-east). Larger places within reach include London (7 miles north-east), City of Westminster (7 miles north), Marylebone (7 miles north-east), Kensington (5 miles north), St Pancras (8 miles north-east) and Shoreditch (9 miles north-east).
Near you in Wimbledon
Typical jobs here are in homes near Willington School, Dog & Fox pub and Cannizaro Park. Wimbledon has its own railway station: Wimbledon station. Nearby you’ll also find Atkinson Morley Hospital (1.2 miles west) and Wimbledon Museum (within half a mile west). For a walk, there’s Battersea Park Lake and Merton Park Green Walks.
Keeping the joints in good condition
Looking after new joints is easy, and it makes a real difference:
- Clean with a mild bathroom cleaner and a soft cloth
- Look for lifting corners and small gaps now and then
- Dry worktop joints after washing up
- Wait for the cure time we give you
Mould needs damp, so keep the room aired. Run the extractor fan during and after a shower, so the bead dries out between uses.
A few black dots in the silicone soon become a black line. When it has grown right through, it rarely cleans out, and nearby grout often goes the same way. Replacing the sealant early keeps the job small.
Places near Wimbledon
Also in Wimbledon
What the job involves on each surface
Kitchen worktops & upstands
Water behind a laminate worktop can make the edge swell. A continuous bead along the back keeps water out, as long as the worktop itself is firmly fixed.
Basins & vanity units
Vanity units have long, worktop-style joints against the wall. Water that gets behind can damage the unit, so a neat, continuous bead matters.
FAQs for Wimbledon
Is parking a problem for a job in Wimbledon?
London parking needs a little planning, so let us know about permits, bays or a driveway when you book. That way the visit can be planned around it.
Do you work in hotels near Wimbledon?
Yes, we work for hotels as well as homes and businesses. A room-by-room programme keeps most rooms in use while the work goes on.
Do you do kitchens as well as bathrooms?
Yes. Next to the sink we use a food-safe product where it’s needed.
My sealant has gone black. Can you sort it?
Yes. Once mould has grown into the silicone, it generally can’t be cleaned out for good, so we cut it out, treat the joint and reseal with anti-fungal silicone.
What do you put in the joint?
Products from Arbo and Everbuild, among others, chosen to suit the joint. We explain the product when we quote.
Are you ARBOMaster approved?
Yes. ARBOMaster is the approved applicator scheme for Arbo sealants, and we are part of it.
Do you cover Wimbledon?
Yes, we do. Wimbledon is part of the area we cover.
Where do you work from?
We’re based in Crawley, West Sussex, and we work across South East England, London and Scotland.