West Berkshire · England
Wash Water Bathroom Resealing
Professional bathroom resealing in and around Wash Water, with old sealant always removed completely and a one-year guarantee.
- Mouldy sealant that has gone black
- Lumpy, uneven sealant from a DIY attempt
- Leaking joints on a shower screen
Keeping the joints in good condition
After the cure time, these simple habits help:
- Wait for the cure time we give you
- Do not let bottles sit on the bead
- Look for lifting corners and small gaps now and then
- Wipe up water along the back of the worktop
Give the silicone time to cure before it gets wet, following the cure time we give you. After that, a quick wipe after showering helps keep it clean.
A few black dots in the silicone soon become a black line. Once it’s deep in the silicone, cleaning usually won’t remove it. Catching it early keeps it a simple reseal.
About our bathroom resealing in Wash Water
Mr Mastic has more than 20 years’ experience of sealant work, and our applicators reseal bathrooms and kitchens across Wash Water. We’re ARBOMaster approved and fully insured, and the work comes with a 12-month guarantee. If you have lumpy, uneven sealant from a DIY attempt and a reseal done over the top of the old bead, we can put it right, whatever the surface.
Somewhere as small as Wash Water, homes tend to be cottages, farmhouses or converted buildings, with some newer houses too. Older walls and timber floors can move a little, and cracked grout and split sealant are often the first signs.
Every job is covered by our 12-month guarantee.
- Where
- Wash Water (RG20)
- Region
- West Berkshire
- Guarantee
- A year, on every job
- Quote
- A clear price before any work starts
- Telephone
- 0345 464 0079
- Last updated
- 26 October 2026
Nearby places to Wash Water
More services for Wash Water
Common questions in Wash Water
Will you come out to Wash Water?
Yes, smaller places are covered as well as towns. Our work covers London and the South East. Just mention lanes, gates or anything else about the route when you book.
Do you cover Wash Water for bathroom resealing?
Yes. We work across London and the South East, and Wash Water is part of that. You can ring 0345 464 0079 or send us an email and let us know what needs doing.
Is white the only colour available?
White, clear and a range of colours are available. On a worktop we colour-match where the joint shows.
What do you put in the joint?
The product depends on the job: sanitary silicone where it gets wet, and sealants suited to movement or weather elsewhere. We use products from Arbo and Everbuild.
Can mouldy silicone be sorted out?
Yes, we replace the mouldy bead. Sprays can fade the marks, but cutting it out and resealing is what lasts. Airing the room well helps stop it returning.
I rent my home. Can I book you?
We can work for tenants, landlords or agents. Just make sure your landlord agrees.
Will it make a mess?
We keep the work tidy. We protect what’s around the joints.
What should I tell you?
Just the basics: where it is, what you’ve noticed and how we reach it. Then call 0345 464 0079 or email us.
Signs you need bathroom resealing in Wash Water
Mould is the reason many people want their sealant replaced. Bathrooms without good ventilation give mould all the damp it needs, and once it has grown into the bead, cleaning rarely gets it out.
People generally contact us after spotting something like this:
- Smears of silicone across the tiles
- New sealant laid over old sealant that is now lifting
- Damp behind the bath or under the tray
- Leaking joints on a shower screen
Schools such as Horris Hill School are buildings too, and washroom and kitchen sealant there needs the same care as at home, and schools and businesses are part of our work as well as homes.
Before booking anyone
- How long to leave it before use
- Which sealant they’ll use, and why
- What preparation is included
- Is VAT in the price?
When it isn’t the sealant
In fairness, there are a few things sealant will not fix:
- A cracked shower tray or bath (that needs repair or replacement)
- Movement from a bath with loose feet or no proper support
- Tiles that have come away from the wall
If you’re not sure, just call 0345 464 0079 or email us and we’ll give you a straight answer.
Where we work in Wash Water
- Shower trays & enclosures
- Baths
- Kitchen worktops & upstands
- Wet rooms
- Basins & vanity units
- Sinks & splashbacks
How the job changes by surface
Sinks & splashbacks
Splashbacks in glass, tile or acrylic meet the worktop in a long joint. We renew it in clear, white or a matched colour.
Kitchen worktops & upstands
The joint between worktop and wall takes splashes, crumbs and cleaning sprays. The new bead is colour-matched where it shows.
How we quote for bathroom resealing
There’s no set price list, because no two jobs are the same. What we look at:
- Access and height
- Whether there’s mould to deal with
- The product the joint needs
- Any working-time requirements on site
Every job is a little different, so we quote each one individually. Size, access and the product the joint needs all make a difference, and we will explain the quote if you ask.
Helping us quote
There’s no need for technical detail. Just tell us:
- How we’d reach the joints
- What’s wrong with the joints now
- Whether it has been sealed before
- Roughly how big the job is
For a quote, ring 0345 464 0079 or drop us an email and tell us where the job is and what the problem looks like. You will have a clear quote before we start.
What bathroom resealing looks like in Wash Water
Hard water is the norm across most of the South East, which leaves limescale on sealant, grout and fittings.
For an older house near a landmark such as St Luke Church, bathrooms in older houses have often been refitted more than once, with sealant laid over sealant. If you let a flat or house near Newbury station, fresh sealant around the bath, shower and sink between tenancies helps a property present well and keeps leaks at bay.
Wash Water is about 3 miles south-west of Newbury, in West Berkshire. Every kind of property in Wash Water is covered for bathroom resealing, old or new, large or small. Every job comes with our one-year guarantee. Across West Berkshire, we cover 155 places, and Wash Water is one of them. Reading is on our list too, around 17 miles away.
Every address in RG20 is covered for bathroom resealing. Local streets include Penwood Road and Andover Road, and we cover them all. If you are just outside Wash Water, we cover Enborne Row (1 mile north-west), Wash Common (1 mile north-east), Newtown Common (1 mile east), Penwood (1 mile south-west) and Woolton Hill (1 mile south-west). Larger places within reach include Newbury (3 miles north-east), Thatcham (5 miles north-east), Burghfield Common (13 miles east), Speenhamland (3 miles north), Hungerford (8 miles north-west) and Calcot (14 miles east).
Near you in Wash Water
Typical jobs here are in homes near Park House School, Falkland Primary School and The Woodpecker pub, among other places. For rail, the closest station is Newbury station, about 2.5 miles north-east. Other landmarks nearby include British Balloon Museum & Library Ltd (2.8 miles north-east) and Hamstead Marshall 2 (2.9 miles north-west). The countryside around Wash Water includes Sidown Hill and Audrey's Meadow.
DIY versus a professional finish
If you do try it yourself, take your time over the preparation: remove every trace of old sealant, clean and dry the joint, and follow the product’s cure time. If it does not work out, we can still put it right.
Some sealant jobs are within reach of a careful DIYer, like a short, easy-to-reach joint indoors. The common mistakes are sealing over old sealant, sealing a damp joint and using far too much.
What happens on the day
When we arrive, we look over the joints with you first, so there are no surprises. We protect the surfaces around the joints before work begins. The work generally takes two to three hours for a typical bath, depending on how much old sealant there is. For a village or hamlet like Wash Water, the journey is planned in advance: tell us about narrow lanes, gates, long drives and where we can park. We bring what the job needs, so it can be finished in one trip where possible.
- Protection goes down around the bath, shower or worktop.
- Old sealant is sliced away and the residue removed.
- Mould is treated, then the joint is left to dry thoroughly.
- Any bath is filled with water, then we lay a bead of anti-fungal silicone in white, clear or a matching colour.
- The joint is finished neatly and we explain when it can get wet.
Preparing for the visit
- Mention any tricky access
- Let us know about parking restrictions
- Keep children and pets away from the work area
How to get a quote
Want a quote for bathroom resealing? Please call 0345 464 0079 or drop us an email with a few details. We will explain what we’d do and give you a clear price before work begins.