West Berkshire · England

Burghclere Common Bathroom Resealing

Bath, shower, basin, wet room, worktop and sink resealing in Burghclere Common, with a 12-month guarantee on every job. Call for a quick quote.

  • Two layers of silicone, both failing
  • Leaking joints on a shower screen
  • A bead that has pulled away from the tiles

Bathroom resealing in Burghclere Common

Bathroom resealing in Burghclere Common

A fresh bead of silicone changes how a bathroom looks more than most people expect. Black, patchy sealant makes clean tiles look tired, and a neat new joint puts that right in a short visit. It also seals the gaps that let water behind the bath. We work on wet rooms, baths and kitchen worktops & upstands, and the jobs we see most are lumpy, uneven sealant from a DIY attempt and sealant that has split, shrunk or peeled away.

In a village or hamlet like Burghclere Common, homes are often older cottages and farmhouses alongside a few newer houses. Older walls and timber floors can move a little, and cracked grout and split sealant are often the first signs.

We stand behind the work with a one-year guarantee, so you’re covered after we have gone.

Location
Burghclere Common (RG20)
Wider area
West Berkshire
Guarantee
A year, on every job
Quote
Quoted before any work starts
Telephone
0345 464 0079
Updated
26 October 2026
Silicone being applied where a shower enclosure meets beige wall tiles

Signs you need bathroom resealing in Burghclere Common

Sealing over old silicone is one of the commonest mistakes we find. New silicone won’t bond to old silicone, so it peels, leaks and hides mould behind it.

If you can see any of these, it’s time to have the joints looked at:

  • Black mould in the silicone that will not clean off
  • Smears of silicone across the tiles
  • Cracked, shrunken or lifting silicone
  • A joint torn by a bath that flexes

Managing a site like The Clere School? Then washroom and kitchen sealant there needs the same care as at home, and schools and businesses are part of our work as well as homes.

What to look for in a quote

  • What insurance they hold
  • Which colour the sealant will be
  • How the surfaces are prepared before sealing
  • When the joint can take water or movement

Our hiring checklist

What happens if it’s left?

You don’t need a new bathroom because the sealant looks bad. A new bead often brings the whole room back, as long as the fittings themselves are sound. If we find a deeper problem, you’ll hear it from us. Around Burghclere Common, older homes often have timber in their floors and frames, and water through a failed joint can rot timber if it’s left.

The cost depends on the size of the job, how hard the old material is to remove and access to the work. We give a clear quote before work begins.

What you get with us

  • Neat joints and a tidy finish
  • Trusted Arbo and Everbuild sealants
  • Any old sealant cut out fully, not covered over
  • 12-month guarantee on every job

See how sealant jobs are priced or customer reviews.

What bathroom resealing looks like in Burghclere Common

Hard water is the norm across most of the South East, so limescale builds up on sealant, grout and fittings.

If you let a flat or house near Newbury station, fresh sealant around the bath, shower and sink between tenancies helps a property present well and keeps leaks at bay. In the older streets around Church of the Ascension, older homes can move a little, which is hard on rigid grout and tired sealant.

Burghclere Common is about 3 miles south of Newbury, in West Berkshire. Homes, rented property, offices and hotels in Burghclere Common can book us for bathroom resealing, old or new, large or small. Every job comes with our 12-month guarantee. Our area takes in 155 places across West Berkshire. Our Reading page covers work nearby.

Here we cover the RG20 postcode area for bathroom resealing. We also cover the places around Burghclere Common: Earlstone Common (1 mile south), Newtown Common (1 mile north), Burghclere (1 mile south), Wash Water (1 mile west) and Sandleford (1 mile north). Larger places within reach include Newbury (3 miles north), Thatcham (4 miles north-east), Burghfield Common (12 miles east), Speenhamland (3 miles north), Hungerford (9 miles north-west) and Spencers Wood (15 miles east).

Local landmarks in Burghclere Common

Locally, jobs take us to homes and businesses close to Horris Hill School, Sandleford Priory and Burghclere Primary School and the streets around them. The closest station to Burghclere Common is Newbury station, about 2.7 miles north of the centre. Well-known places in the area include West Berkshire Community Hospital (3.6 miles north) and Old Chapel Textile Centre (2.1 miles north-east). Green spaces nearby include Audrey's Meadow and Beacon Hill.

Map of Burghclere Common © OpenStreetMap contributors

Your questions about bathroom resealing in Burghclere Common

Can you do bathroom resealing in Burghclere Common?

Yes. Our work covers London and the South East, and Burghclere Common is part of that. Just ring 0345 464 0079 or send us an email with a few details of the job, and we will give you a clear price.

I let a flat near Newbury station. Can you help?

Yes, we work for landlords and agents. You can phone 0345 464 0079 or send us an email with the address and a few details, and we’ll give you a fixed price before any work starts.

Should I try DIY first?

Sometimes. The key is preparation: remove all the old material and work on a clean, dry joint. We can always put it right if it fails.

How long before the new sealant can get wet?

The surface skins over fairly quickly, but the bead needs longer to cure right through. Leave it around 24 hours before it gets wet, or follow the cure time we give you.

Can new silicone go straight over the old?

No. Fresh silicone can’t stick to the old bead, so it lifts and traps water and mould underneath. All the old sealant comes out first.

Which products do you use?

It depends on the joint: sanitary silicone where it gets wet, and sealants suited to movement or weather elsewhere. We use products from Arbo and Everbuild.

Will you leave a mess?

No. The area is protected while we work and cleaned up afterwards.

What does bathroom resealing cost?

Every job is different, so each one gets its own quote. For a quick quote, phone 0345 464 0079 or send us an email and tell us what needs doing and where.

What we do, step by step

You do not need to clear the whole room or building before we come, only the area right around the joints. We protect the rest, and the work takes a couple of hours for a single bath or shower for a typical job. Somewhere like Burghclere Common needs a little journey planning: tell us about narrow lanes, gates, long drives and where we can park. We bring what the job needs, so it can be finished in one trip where possible.

  1. Protection goes down around the bath, shower or worktop.
  2. Old sealant is sliced away and the residue removed.
  3. Mould is treated, then the joint is left to dry thoroughly.
  4. Baths are filled first, then anti-fungal sanitary silicone is applied in a colour to suit.
  5. The joint is finished neatly and we explain when it can get wet.

Getting ready for the visit

  • Mention any leaks or damp you’ve noticed
  • Keep children and pets away from the work area
  • Clear the area around the work

Getting a quote

Getting a quote is simple: let us know the job and the location and its rough size. Photos by email help us understand the job, and we will come back to you with a quote.

Get a price

Related advice

When something else is needed

Some problems need a builder, plumber or other trade rather than us:

  • A tray that rocks until it’s re-bedded
  • Cracked or missing grout between tiles (that’s regrouting)
  • A leaking waste, trap or valve

If in doubt, call 0345 464 0079 or send us an email and we’ll say what we think.

Where we work in Burghclere Common

  • Baths
  • Kitchen worktops & upstands
  • Shower trays & enclosures
  • Basins & vanity units
  • Sinks & splashbacks
  • Wet rooms

Keeping the joints in good condition

Simple care keeps the joints in good condition. Our advice:

  • Wait for the cure time we give you
  • Keep bottles off the sealant line
  • Squeegee the walls and tray after use
  • Open a window or run the fan so the room dries

Keep water off the new bead until it has cured, following the cure time we give you. After that, a quick wipe after showering helps keep it clean.

Mould that starts as a few spots spreads through the bead. Once it’s deep in the silicone, cleaning usually won’t remove it. Replacing the sealant early keeps the job small.

Work for landlords, hotels and businesses

Hotels need rooms back in use, so the work can be planned room by room around your bookings where we can. We’ve worked in hotels as well as homes and businesses.

We also work for property managers and facilities teams. We can quote a run of properties together, and we are fully insured.

Should I try it myself first?

If you’ve already had a go yourself, that’s fine. We remove it and do the joint properly.

Sealing over old silicone is the commonest DIY error. New silicone won’t bond to old, so it peels away and traps moisture behind it. Everything old must be removed first.

20+ yearsMastic and sealant specialists
ARBOMaster approvedApproved applicator for Arbo sealants
Fully insuredDomestic, commercial and hotels
One-year guaranteeOn every job