West Berkshire · England
Wash Common Bathroom Resealing
We cover Wash Common for bath, shower, basin, wet room, worktop and sink resealing. Old material cut out, joints cleaned and sealed neatly and every job guaranteed for a year.
- Gaps where the bath or tray has moved
- Water getting behind the kitchen upstand
- Water escaping at the shower enclosure
How we handle bathroom resealing in Wash Common
Homes in Wash Common have the same weak spots as anywhere else: the long edge of the bath, the base of the shower tray, the back of the basin and the line along the worktop. Every joint is cut out, cleaned and left dry before it’s resealed. We work on baths, kitchen worktops & upstands and sinks & splashbacks, and people most often call us about damp behind the bath or under the tray and a reseal done over the top of the old bead.
Even in a smaller place like Wash Common, bathrooms and kitchens see heavy daily use. Whether it’s a cottage bathroom or a newer en suite, the approach is the same: old sealant or grout cut out, joints cleaned and dried, and a fresh finish laid.
Each job carries a 12-month guarantee, large or small.
- Place
- Wash Common (RG14, RG20)
- Wider area
- West Berkshire
- Guarantee
- 12 months on all our work
- Price
- Quoted before any work starts
- Telephone
- 0345 464 0079
- Last updated
- 26 October 2026
Wash Common homes and their sealant
Most of the South East has hard water, so limescale builds up on sealant, grout and fittings.
Rented homes near Newbury station change hands often, and a reseal between tenants is a quick way to make the bathroom and kitchen look cared for. In the older streets around St Luke Church, walls and floors in older homes can move, and sealant and grout show it first.
Wash Common is about 2 miles south-west of Newbury, in West Berkshire. For bathroom resealing in and around Wash Common, please call 0345 464 0079 or send us an email for a quick quote. We’re based in Crawley and cover West Berkshire, Wash Common included. Our area takes in 155 places across West Berkshire. Reading is on our list too, about 17 miles from Wash Common.
Work in RG14 and RG20 works the same way as everywhere else we cover. Whether your property is on Battle Road, Stuart Road and Warren Road or anywhere close by, our applicators can take on the job. Nearby, we also carry out bathroom resealing in Wash Water (1 mile south-west), Enborne Row (1 mile south-west), Skinners Green (1 mile north-west), Newtown Common (1 mile south-east) and Sandleford (1 mile east). Further out, we also cover Thatcham (4 miles north-east), Burghfield Common (12 miles east), Hungerford (8 miles west), Calcot (14 miles east), Lambourn (12 miles north-west) and Shaw (3 miles north-east).
What’s near Wash Common
In Wash Common, that means homes and buildings near Horris Hill School, Park House School and The Gun pub. For rail, the closest station is Newbury station, roughly 1.8 miles north-east of the centre. Well-known places in the area include British Balloon Museum & Library Ltd (2 miles north-east) and Hamstead Marshall 2 (2.7 miles north-west). Not far away are Sidown Hill and Audrey's Meadow.
DIY sealant or a professional job?
The biggest DIY mistake is sealing over old sealant. New silicone will not bond to old, so it lifts and traps water and mould underneath. Everything old must be removed first.
Some jobs are best left to a professional: high-level joints, fire-rated gaps, external movement joints and big jobs need the right product, the right access and the right method.
Keeping the joints in good condition
Good habits help new joints last longer. A few tips:
- Clean with a mild bathroom cleaner and a soft cloth
- Move toiletries away from the joint
- Give the silicone its full cure time
- Open a window or run the fan so the room dries
Wipe up standing water along the worktop joint and keep hot pans off the bead. The drier the joint stays, the longer it lasts.
A failed kitchen joint is easy to miss. Water gets behind the upstand and into the edge of a laminate worktop, and the board underneath can swell. Resealing before that happens protects the worktop.
The process
At the end, we look at the finished work together and tell you how long to leave it. The visit itself generally takes a couple of hours for one bath or shower, or most of a day for a full bathroom and kitchen, depending on the amount of work. For a job in Wash Common, we agree the time, the access and parking before the day. Outdoor jobs depend on a dry day, since sealant needs a dry surface.
- First, each joint is checked for movement and signs of water.
- Every trace of the old bead is removed, including the thin smear on the tiles.
- Joints are degreased and any mould is treated.
- With the joint dry, and any bath loaded with water, a single bead of anti-fungal silicone is applied.
- The bead is tooled smooth and you are told the cure time, usually around 24 hours.
How to prepare
- Let us know if you’ve seen damp or leaks
- For indoor joints, keep the area dry beforehand if you can
- On commercial sites, let us know about site rules
How to get a quote
We don’t publish a price list, because every job is different. Instead, your job gets its own clear quote. To arrange one, phone 0345 464 0079 or email us.
Read more
Surface by surface
Shower trays & enclosures
If a tray moves underfoot, new silicone won’t last. Movement is checked before anything is resealed, and tell you if it needs re-bedding first.
Basins & vanity units
Basin joints are short and close to eye level: so we keep the line tidy and even, in white, clear or a colour to suit.
What sealant work can’t fix
We won’t take on work that won’t last, so these are the limits:
- Leaks from a shower valve, waste or pipework (a plumber’s job)
- A bath or tray that moves because it isn’t properly supported
- Water getting in through the grout rather than the sealant
Not sure which it is? You can call 0345 464 0079 or email us and we will tell you honestly before booking.
Where we work in Wash Common
- Basins & vanity units
- Baths
- Shower trays & enclosures
- Wet rooms
- Kitchen worktops & upstands
- Sinks & splashbacks
Signs you need bathroom resealing in Wash Common
Sealing over old silicone is one of the commonest mistakes we find. New silicone won’t bond to old silicone, so it lifts, lets water in and traps mould underneath.
The problems people normally mention when they call are:
- Two layers of silicone, both failing
- Water getting behind the bath panel
- A messy, uneven bead from a previous reseal
- Mouldy sealant that has gone black
For site and facilities teams at buildings such as Falkland Primary School, its toilets, changing areas and kitchens need their sealant renewed like any other building’s.
What to look for in a quote
- When the joint can take water or movement
- Is the old sealant removed completely?
- What insurance they hold
- How the surfaces are prepared before sealing
How we quote for bathroom resealing
We do not publish a price list, because no two jobs are the same. What we look at:
- Which sealant suits the joint
- How many rooms, windows or areas are involved
- The size of the job
- How much old sealant there is and how hard it is to remove
A failed joint rarely gets cheaper to fix by waiting. If you’re unsure, ring 0345 464 0079 or send us an email for an honest opinion and a quote.
Asking for a quote
What to tell us when you ask for a quote:
- Pictures of the joints, sent by email
- The problem you’ve noticed
- Whether it has been sealed before
- The address or postcode of the job
It all starts with a short chat. Describe the problem, the location and the size of the job, and we will explain how we’d tackle it. When it suits you, phone 0345 464 0079 or email us.
Wash Common questions
I let a flat near Newbury station. Can you help?
Yes, landlords and agents are among the people we work for, and several properties can go on one quote. You can phone 0345 464 0079 or send us an email with the details for a clear quote.
Do you cover Wash Common for bathroom resealing?
Yes, Wash Common is within the area we cover. Our work covers London and the South East. You can call 0345 464 0079 or drop us an email and tell us what needs doing.
What information do you need?
Where the job is, what the problem is and roughly how big it is. Photos by email help too.
Do you have insurance?
Yes. We are fully insured.
Does the resealing come with a guarantee?
Yes. Our one-year guarantee covers every job, and we are ARBOMaster approved applicators.
Is white the only colour available?
There’s a choice: clear, white and colours chosen to suit the room. We will talk it through when we quote.
Will you leave a mess?
Not at all. The area is protected while we work and cleaned up afterwards.
Which products do you use?
Each joint gets the product that suits it. Movement, water and weather all affect the choice.