Hampshire · England
Bathroom & kitchen resealing in Stanmore, Hampshire
Problem with your baths, showers and worktops in Stanmore? We remove the old material, prepare the joints and seal them properly.
- Shrunken sealant along the back of a worktop
- Cracked, shrunken or lifting silicone
- Two layers of silicone, both failing
Different surfaces, different methods
Baths
Baths move more than any other fitting, so we fill it with water before sealing. That way the joint is laid with the bath at its heaviest and isn’t stretched when it’s used.
Wet rooms
In a wet room, the joints between floor and walls take standing water. They’re resealed with anti-fungal sanitary silicone, working on the surface joints, not the tanking or drainage.
Bathroom resealing in Stanmore
The secret of a lasting bead is the preparation. The old sealant is removed to the last smear, after which the joint is degreased and any mould treated. New silicone goes on only when the joint is fully dry. If you have a reseal done over the top of the old bead and failed sealant on the screen profile, we can put it right, on shower trays & enclosures, sinks & splashbacks and wet rooms alike.
In a smaller place like Stanmore, homes are mostly houses and bungalows rather than flats, from older cottages to newer builds. Bathrooms and kitchens here get the same daily wear as anywhere, and the sealant and grout show it first.
All our work is covered by a 12-month guarantee, wherever you are in Hampshire.
- Location
- Stanmore (SO22, SO23)
- Region
- Hampshire
- Cover
- One year on every job
- Quotes
- Quoted before any work starts
- Call
- 0345 464 0079
- Page updated
- 26 October 2026
What we are called out for in Stanmore
Silicone does not last for ever. Every shower, every splash and every wipe with a cleaner take their toll over the years, so its life depends on how the room is used, cleaned and aired.
These are the problems we’re asked about most:
- Damp behind the bath or under the tray
- Black mould in the silicone that will not clean off
- Sealant that has split, shrunk or peeled away
- A messy, uneven bead from a previous reseal
For site and facilities teams at buildings such as Stanmore Primary School, washroom and kitchen sealant there needs the same care as at home, and schools and businesses are part of our work as well as homes.
Before you book anyone
- Which colour the sealant will be
- How much experience the applicator has
- What insurance they hold
- Whether the sealant suits the joint
Common questions in Stanmore
Can you help a landlord with a rental near Winchester station?
Yes, rental work is part of what we do. You can ring 0345 464 0079 or email us with the address and a few details, and we will give you a fixed price before we start.
Do you take on hotel work around Stanmore?
Yes, we work for hotels as well as homes and businesses. A room-by-room programme keeps most rooms in use while the work goes on.
Are you fully insured?
Yes. We are fully insured for domestic and commercial work.
Do I have to be there?
Access is agreed with you when the job is booked. For inside work, that normally means someone being in.
Will the old sealant be removed?
Yes, always, and completely. New silicone doesn’t stick to old silicone, so any old material comes out before anything new goes in.
Do you come to Stanmore?
Yes. We are based in Crawley and work across South East England, London and Scotland, and that includes Stanmore.
Which products do you use?
Quality sealants from brands including Arbo and Everbuild, chosen to suit the joint. We explain the product when we quote.
When can I use the bath or shower again?
The surface skins over fairly quickly, but the bead needs longer to cure right through. Leave it around 24 hours before it gets wet, or follow the cure time we give you.
Why act early in Stanmore
Sorting it now is quick: it takes a couple of hours for a single bath or shower. Wait for a leak and you may be looking at panels off, drying out and redecorating too. Homes in smaller places like Stanmore can face more weather, and failed outside joints let damp into walls. Indoors, a failed seal lets water into floors and panels as it would anywhere.
Homes and businesses are quoted the same way: the amount of work, how we reach it and what it needs. Call for a quick quote and we’ll explain what it covers.
Why us?
- A 12-month guarantee on all work
- Arbo and Everbuild products
- Colour agreed with you before any work starts
- White, clear, grey or coloured to suit, where the product allows
See our cost guide and what customers say.
Quotes for bathroom resealing in Stanmore
The price is agreed before any work begins. It takes into account:
- Access and height
- Mould in or behind the old joints
- How many areas need sealing
- Working hours on commercial sites
A few things move the cost up or down: the old material and how easily it comes out, whether mould needs treating, and whether the work is at height. Your quote takes all of that into account.
Asking for a quote
To make quoting easier, please include:
- The problem you’ve noticed
- Access, such as stairs, a lift or height
- Photos by email, if that’s easy
- Any previous sealing or DIY work
We quote each job on its own, so the first step is telling us about yours. Just call 0345 464 0079 or send us an email with the details and send photos if you have them.
Also near Stanmore
Other services in Stanmore
What bathroom resealing looks like in Stanmore
There are hotels and other places to stay in and around Stanmore. Hotel bathrooms are part of our work as well as homes, and can be done room by room. Hard water is the norm across most of the South East, which leaves limescale on sealant, grout and fittings.
Rented homes near Winchester station change hands often, and fresh sealant around the bath, shower and sink between tenancies helps a property present well and keeps leaks at bay. If you live in an older home near Saint Luke, bathrooms in older houses have often been refitted more than once, with sealant laid over sealant.
Stanmore is about 1 mile south-west of Winchester, in Hampshire. Across the SO22 area, our applicators can take on bathroom resealing. Our Hampshire coverage runs to 683 places, Stanmore among them. Our Southampton page covers work nearby, about 10 miles away.
Work in SO22 and SO23 works the same way as everywhere else we cover. Whether your property is on Fox Lane, Kings Road and Romsey Road or a nearby road, our applicators can take on the job. Stanmore is on the A3090, which makes it straightforward to reach with everything needed for bathroom resealing. We also cover the places around Stanmore: Badger Farm (1 mile south), St Cross (1 mile south-east), Oliver's Battery (1 mile south-west), Winchester (1 mile north-east) and Weeke (1 mile north). Larger places within reach include Eastleigh (6 miles south), Fareham (15 miles south-east), Andover (13 miles north-west), Totton (12 miles south-west), Chandler's Ford (5 miles south-west) and Hedge End (10 miles south).
Landmarks near Stanmore
Locally, jobs take us to homes and businesses close to White Horse Public House, Kings' School and St. Cross Park, among other places. Stanmore’s nearest station is Winchester station, roughly 1.2 miles north-east. A little further out are Winchester Castle (0.9 miles north-east) and Balfour Museum of Hampshire Red Cross History (0.5 miles north-west). For a walk, there’s Winnall Moors and Twyford Down.
How to look after the new joints
Joint life depends on how it’s used and looked after. Here’s what we suggest:
- Never pick at the silicone with a blade
- Clean with a mild bathroom cleaner and a soft cloth
- Open a window or run the fan so the room dries
- Look for lifting corners and small gaps now and then
Keep water off the new bead until it has cured, which is generally around 24 hours. Once it’s cured, wiping it down after use keeps it looking new.
A failed kitchen joint is easy to miss. Water gets behind the upstand and into the edge of a laminate worktop, where it can make the board swell. A reseal in time can save the worktop.
Work for landlords, hotels and businesses
A neglected joint can let water reach the structure, which matters even more when someone else lives there. Keeping joints in good order is simple maintenance.
Whether it’s one flat or a portfolio, you get the same standard of work: the old material taken out, careful preparation and a 12-month guarantee.
How the visit works
We bring everything the job needs with us, so you don’t need to buy or prepare anything. Once we’ve agreed what’s being done, the area is protected and the work begins. Most jobs take a couple of hours for one bath or shower, or most of a day for a full bathroom and kitchen. Parking around Stanmore is usually easier than in a town centre, but mention any lanes, gates or long drives. For outside work, side access and the height of the joints help us plan.
- First the area is protected and every bit of old sealant removed, including the film left on the tiles.
- We clean and degrease the joint and treat any mould.
- We let it dry fully and fill the bath with water before sealing.
- New anti-fungal silicone goes on in a colour to suit and is tooled to a clean finish.
- We clear away and tell you when it can get wet, usually after around 24 hours.
How to prepare
- Let us know about earlier repairs to the joints
- Keep children and pets away from the work area
- Mention any leaks or damp you’ve noticed
Get a quote
A good description makes for an accurate quote. Let us know the location, the problem and roughly how many joints.