Hampshire · England

Bathroom & kitchen resealing in St Mary Bourne, Hampshire

Bath, shower, basin, wet room, worktop and sink resealing for St Mary Bourne, backed by a 12-month guarantee. Ask us for a quote.

  • Shrunken sealant along the back of a worktop
  • A joint torn by a bath that flexes
  • Damp behind the bath or under the tray

Trusted bathroom resealing in St Mary Bourne

Bathroom resealing in St Mary Bourne

Sealant is the soft line between a bath, shower or worktop and the wall. When it splits, shrinks or turns black, water gets behind it into walls, panels and floors. Our team cut the old bead out completely and lay a new one in anti-fungal sanitary silicone. If you have black mould in the silicone that won’t clean off and splits where the tray meets the wall, we can put it right, whatever the surface.

For a small place like St Mary Bourne, bathroom resealing is planned like any other job: the journey and access are simply agreed in advance. Once we’re there, the bathroom or kitchen gets the same care as anywhere else.

You’re covered for a year from the day we finish. If anything is not right with it, ring 0345 464 0079 or send us an email.

Place
St Mary Bourne (SP11)
Region
Hampshire
Cover
One year on every job
Quotes
Quoted before any work starts
Phone
0345 464 0079
Updated
26 October 2026
Fresh white silicone going into the corner where a shower screen meets the tiled wall

What the job involves on each surface

Wet rooms

In a wet room, the joints between floor and walls take standing water. They get anti-fungal sanitary silicone, and our work is on the visible joints only.

Sinks & splashbacks

Where a splashback meets the worktop, there’s a joint that catches every splash. We renew it in clear, white or a matched colour.

The process

A visit follows a simple pattern: we check the joints, protect the area around them, do the work and clear up. It usually takes two to three hours for a typical bath, depending on how much old sealant there is. For a village or hamlet like St Mary Bourne, the journey is planned in advance: tell us about narrow lanes, gates, long drives and where we can park. Everything for the job comes with us, so a second trip is avoided where possible.

  1. First, each joint is checked for movement and signs of water.
  2. The old silicone is cut out completely, along with the film it leaves on the tiles.
  3. The joint is cleaned, degreased and treated for mould.
  4. With the joint dry, and any bath loaded with water, a single bead of anti-fungal silicone is applied.
  5. The bead is tooled smooth and you are told the cure time, normally around 24 hours.

Before we arrive

  • Let us know about stairs, lifts or work at height
  • Move anything stored near the joints
  • Try not to wet indoor joints just before the visit

Get a quote

Need a quote? Please ring 0345 464 0079 or email us and tell us about the job. You will know what we plan to do, and what it will cost, before any work begins.

Ask for a quote

Related advice

DIY versus a professional finish

Too much sealant is as bad as too little. A heavy bead looks messy and copes badly with movement, and getting the depth right matters as much as the look.

What a professional job adds is preparation and the right product. We take joints back to clean, dry surfaces, and the sealant is chosen for how the joint moves and where it is, and the work is guaranteed for a year.

What happens if it’s left?

Running new silicone over the old joint can look tidy for a few weeks, but it will not bond. It lifts, traps water and grows mould behind it. Where a wall is exposed, as many are in small places like St Mary Bourne, wind-driven rain gets into any failed joint, and damp in older walls is slow to dry out.

The cost reflects the work involved, not guesswork. That is why we ask a few questions first and agree the price before starting.

Why choose Mr Mastic in St Mary Bourne

  • We agree the colour with you first
  • Approved under the ARBOMaster scheme
  • Every job guaranteed for a year
  • 4.9 on Google from 180+ five-star reviews

See what affects the cost and what customers say.

Bathroom resealing around St Mary Bourne

Most of the South East has hard water, which leaves limescale on sealant, grout and fittings, and it has to be cleaned off before new sealant goes in.

Rented homes near Whitchurch (Hampshire) station change hands often, and mouldy sealant is one of the first things a new tenant notices, so it’s worth renewing between lets. In the older streets around Church of St Peter, older homes can move a little, which is hard on rigid grout and tired sealant.

St Mary Bourne is about 5 miles north-east of Andover, in Hampshire. If you need bathroom resealing in St Mary Bourne, please call 0345 464 0079 or send us an email for a quick quote. We are based in Crawley and cover Hampshire. St Mary Bourne is one of 683 towns and villages in Hampshire we cover. For nearby work, see our Southampton page.

Jobs for bathroom resealing in SP11 works the same way as everywhere else we cover. That includes homes and businesses on Spring Hill Lane, Springhill and Bells Meadow and the roads around them. Neighbouring places we cover for bathroom resealing include Binley (2 miles north), Wadwick (2 miles north-east), Hurstbourne Priors (3 miles south), Cole Henley (3 miles east) and Whitchurch (3 miles south-east). Larger places within reach include Basingstoke (13 miles east), Winchester (14 miles south), Andover (5 miles south-west), Tadley (13 miles north-east), Hyde (13 miles south) and Popley (14 miles east).

Near you in St Mary Bourne

Typical jobs here are in homes near Coronation Arms, among other places. The closest station to St Mary Bourne is Whitchurch (Hampshire) station, roughly 2.9 miles south-east. Nearby you will also find Finkley Down Farm Museum (3.2 miles south-west) and Andover War Memorial Hospital (4.9 miles south-west). Green spaces nearby include Sidown Hill and Anton Lakes.

Map of St Mary Bourne © OpenStreetMap contributors

St Mary Bourne: your questions answered

Do you cover St Mary Bourne for bathroom resealing?

Yes. We work across London and the South East, and St Mary Bourne is part of that. You can call 0345 464 0079 or send us an email and tell us what needs doing, and we will send you a clear quote.

Will you come out to St Mary Bourne?

Yes, St Mary Bourne is covered. We work across London and the South East, from towns to the smallest places. The journey is planned ahead, so it helps to know about access.

Are you an approved applicator?

Yes. We are an ARBOMaster approved applicator, which is run for the Arbo sealant brand.

Do I have to be there?

We need access to the joints, so we’ll agree that with you when we book. For inside work, that normally means someone being in.

Does the resealing come with a guarantee?

Yes. Every job carries our 12-month guarantee.

Is it worth trying it myself?

Some simple jobs can be done by a careful DIYer. Most DIY failures come from sealing over old material, wet joints or too much sealant.

How long does a bath or shower reseal take?

One bath or shower is around two hours’ work, including cutting out the old sealant. A full bathroom and kitchen can take most of a day.

Are you insured?

Yes. We’re fully insured, and we have been doing sealant work for more than 20 years.

Looking after it afterwards

How long the joints last depends on use and care. We suggest:

  • Avoid abrasive pads on the sealant
  • Keep bottles off the sealant line
  • Run the extractor fan during and after every shower
  • Dry the bead with a towel now and then

Clean the silicone with care: warm soapy water and a soft cloth do the job. Avoid scouring pads and anything sharp, because a damaged bead gives mould a foothold.

A split bead lets water through every time the bath or shower is used. Over time that water reaches floors, walls and ceilings. Resealing early stops it.

Do you need bathroom resealing in St Mary Bourne?

The wrong product fails fast. Decorators’ caulk and all-purpose sealants aren’t made for constant wetting, so they stain, crack or go mouldy before long. Wet areas call for a sanitary silicone with an anti-fungal additive.

People normally contact us after spotting one of these:

  • Leaks into the floor or ceiling below
  • Gaps where the bath or tray has moved
  • Smears of silicone across the tiles
  • Water getting behind the kitchen upstand

For site and facilities teams at buildings such as St Mary Bourne Primary School, washroom and kitchen sealant there needs the same care as at home, and schools and businesses are part of our work as well as homes.

Questions to ask before you book

  • Whether they seal over old material or remove it
  • Whether the sealant suits the joint
  • Is VAT in the price?
  • What happens if they find a problem under the old sealant

How to choose a mastic man

How we quote for bathroom resealing

The price is agreed before any work begins. It takes into account:

  • The number of rooms or windows
  • Whether old sealant or filler has to be cut out
  • Working hours on commercial sites
  • Access and height

There are no prices on our website, because each job is priced on what it involves. Call for a quick quote.

Asking for a quote

You do not need to know the technical terms. It helps if you can tell us:

  • Where the job is, and your postcode
  • How we’d reach the joints
  • Pictures of the joints, sent by email
  • What the problem is, such as mould, gaps, leaks or cracking

We quote each job on its own, so start by telling us what you need. Just ring 0345 464 0079 or drop us an email with the details.

20+ yearsMastic and sealant specialists
ARBOMaster approvedApproved applicator for Arbo sealants
Fully insuredDomestic, commercial and hotels
One-year guaranteeOn every job