Hampshire · England
Bathroom Resealing in Sheet
We cover Sheet for bath, shower, basin, wet room, worktop and sink resealing. Old sealant removed completely, joints prepared properly.
- Leaks into the floor or ceiling below
- Sealant that has split, shrunk or peeled away
- Two layers of silicone, both failing
Common questions in Sheet
Can you help a landlord with a rental near Petersfield station?
Yes, rental work is part of what we do. Just call 0345 464 0079 or send us an email and tell us about the property, and we will send you a clear quote.
Will you come out to Sheet?
Yes, smaller places are covered as well as towns. We work across London and the South East. Let us know about access, parking and anything unusual about getting there when you book.
Does someone need to be in?
We need access to the joints, so we will agree that with you when we book. Indoors, that normally means someone at home.
Can I choose the colour of the sealant?
White and clear are the most common choices, and other colours are available to suit tiles, trays and worktops. Let us know your preference when you ask for a quote.
How long does a bath or shower reseal take?
It depends on how many joints there are and how much old sealant has to come out. Allow a couple of hours for a typical bath or shower.
Will you leave a mess?
We keep the work tidy. We protect what’s around the joints.
Can mouldy silicone be sorted out?
Yes, by replacing the sealant. Cleaning products may lighten it, but the lasting fix is new anti-fungal silicone on a clean, treated joint. Good ventilation helps keep it away.
Can I do it myself?
You can, for simple jobs. The key is preparation: remove all the old material and work on a clean, dry joint. If it does not work out, we can redo it.
How we handle bathroom resealing in Sheet
Before a bath is sealed, it’s filled with water. A full bath sits slightly lower than an empty one, so the bead isn’t stretched the first time someone gets in. Quick jobs often leave it out, and it makes a real difference. If you are dealing with gaps between the worktop and the wall and lumpy, uneven sealant from a DIY attempt, we can help.
Around Sheet, it’s houses and cottages rather than flats. The work is the same as anywhere: old material cut out, joints cleaned and a fresh finish laid.
You get a one-year guarantee, the same in Sheet as everywhere else we work.
- Location
- Sheet (GU32, GU31)
- Wider area
- Hampshire
- Cover
- A year, on every job
- Price
- A clear quote up front
- Phone
- 0345 464 0079
- Updated
- 26 October 2026
How the job changes by surface
Basins & vanity units
Basin joints are short and close to eye level: the bead is right in front of you, so it’s tooled cleanly and evenly, finished in a colour that suits the basin.
Wet rooms
In a wet room, the joints between floor and walls take standing water. They get anti-fungal sanitary silicone, working on the surface joints, not the tanking or drainage.
Common problems we fix in Sheet
No sealant lasts indefinitely. Daily water, heat and cleaning products take their toll over the years, and how long it lasts comes down to use, cleaning and ventilation.
Any of these means the joints need attention:
- Splits where the tray meets the wall
- Water escaping at the shower enclosure
- Shrunken sealant along the back of a worktop
- New sealant laid over old sealant that is now lifting
For landlords with property near Petersfield station, a reseal between tenants is a quick way to make the bathroom and kitchen look cared for.
Before you book anyone
- Is VAT in the price?
- How the surfaces are prepared before sealing
- Which colour the sealant will be
- What product goes in the joint
The process
On the day, we start by going over the job with you, so there are no surprises. Surfaces next to the work are protected before any work begins. Most jobs take a couple of hours for a single bath or shower. In a small place like Sheet, access is usually the main thing to plan. For outside work, also let us know about exposed walls and any outbuildings involved.
- Protection goes down around the bath, shower or worktop.
- We cut away the old sealant and clean off what’s left.
- We treat any mould and let the joint dry properly.
- Baths are filled first, then anti-fungal sanitary silicone is applied in a colour to suit.
- The joint is finished neatly and we explain when it can get wet.
Getting ready for the visit
- Mention any parking rules near the property
- Mention any tricky access
- Where the joints are inside, avoid wetting them before we arrive
How to get a quote
There’s no standard price list. Instead, we give you a clear quote for your job. To arrange one, ring 0345 464 0079 or email us.
Related advice
Keeping the joints in good condition
Good habits help new joints last longer. Our tips:
- Check the joints every few months for splits or lifting
- Keep scourers and sharp tools away from the bead
- Wipe up water along the back of the worktop
- Wipe the sealant dry after showering
Wipe up standing water along the worktop joint and keep hot pans away from the silicone. The drier the joint stays, the longer it lasts.
A split bead lets water through every time the bath or shower is used. Left alone, it soaks into the floor, the wall behind the tiles or the ceiling below. Early resealing closes the gap before damage is done.
How we quote for bathroom resealing
Your quote is based on your job. We take into account:
- The size of the job
- The product the joint needs
- How many areas need sealing
- Mould in or behind the old joints
No two jobs are quite the same, so we quote each one individually. Size, access and the product the joint needs all make a difference.
What to tell us for a quote
To help us quote quickly, let us know:
- The rough size of the job
- Where the job is, and your postcode
- Access, such as stairs, a lift or height
- Whether it’s a home or a business
For a quick quote, get us on the phone, or email us if that’s easier. Tell us about the joints that need doing and we’ll explain what’s involved.
Bathrooms and kitchens in Sheet
Most of the South East has hard water, so limescale builds up on sealant, grout and fittings.
Homes close to Church of St Mary Magdalene include some older properties, and bathrooms in older houses have often been refitted more than once, with sealant laid over sealant. Managing a site like Sheet Primary School? Then washroom and kitchen sealant there needs the same care as at home, and schools and businesses are part of our work as well as homes.
Sheet is about 1 mile north-east of Petersfield, in Hampshire. We provide bathroom resealing to homes and businesses in Sheet, as part of our work across Hampshire. Sheet is one of 683 towns and villages in Hampshire where we work. There’s also a page for Portsmouth, about 16 miles away.
We work across the GU32 and GU31 postcode area for bathroom resealing. You’ll find streets such as Mill Lane, Village Street and Farnham Road, all of which we cover. We also cover the places around Sheet: Petersfield (1 mile south-west), Steep (1 mile north-west), Steep Marsh (1 mile north-west), Stroud (2 miles west) and Oakshott (2 miles north-west). Within a short drive, we also cover Havant (11 miles south), Horndean (8 miles south-west), Alton (10 miles north), Waterlooville (10 miles south-west), Purbrook (11 miles south-west) and Bordon (7 miles north).
Near you in Sheet
Locally, jobs take us to homes and businesses close to The Queens Head pub, Churcher's College and The Petersfield School and the streets around them. For rail, the closest station is Petersfield station, roughly 1.1 miles south-west. Nearby you will also find Petersfield Community Hospital (1.3 miles south-west) and Bear Museum (1.1 miles south-west). The countryside around Sheet includes Liss Riverside Railway Walk South and Wheatham Hill.
For landlords and businesses
Housing providers, facilities teams and property managers book us too. Several sites can go on one quote, and we’re fully insured.
Whether it’s one flat or a portfolio, you get the same standard of work: the old material taken out, careful preparation and a 12-month guarantee.
Nearby places to Sheet
Other services in Sheet
DIY sealant or a professional job?
A careful DIYer can reseal a simple joint, such as a straightforward joint indoors. The common mistakes are sealing over old sealant, sealing a damp joint and using far too much.
Not every job suits DIY: work at height, external movement joints, fire-rated sealant and large areas call for the right materials, safe access and experience.