Kent · England
Bathroom & kitchen resealing in Selsted, Kent
Bath, shower, basin, wet room, worktop and sink resealing for homes and businesses in Selsted and across Kent. Fully insured, ARBOMaster approved and guaranteed for a year.
- Sealant that has split, shrunk or peeled away
- Water getting behind the bath panel
- Gaps where the bath or tray has moved
What affects the quote in Selsted
Call for a quick quote. What matters most is:
- Whether there’s mould to deal with
- The old material and how stubborn it is
- The type of sealant required
- Access and height
Homes and businesses are quoted the same way: the amount of work, how we reach it and what it needs, plus any working-time requirements on site. Call for a quick quote and we will go through it with you.
What we need to know
Before you ask for a quote, have a think about:
- How we’d reach the joints
- What the problem is, such as mould, gaps, leaks or cracking
- Roughly how big the job is
- Whether it has been sealed before
If you are in Selsted and need bathroom resealing, ring 0345 464 0079 or send us an email. A short description of the job and where it is helps us quote, and you will get a clear quote before we start.
Bathroom resealing in Selsted, done properly
Resealing is a small job that makes a big difference. Mouldy silicone makes even a new bathroom look neglected, and a neat new joint puts that right in a short visit. Just as important, it closes the gaps water would otherwise get through. Common call-outs are for cracked, shrunken or lifting silicone and leaking joints on a shower screen, across basins & vanity units, shower trays & enclosures and baths.
In a village or hamlet like Selsted, homes are often older cottages and farmhouses alongside a few newer houses. Movement in older walls and floors tends to show first as cracked grout or split sealant.
A one-year guarantee comes with the work, just as it does everywhere we cover.
- Location
- Selsted (CT15)
- Region
- Kent
- Cover
- 12 months on all our work
- Quotes
- Quoted before any work starts
- Call
- 0345 464 0079
- Updated
- 26 October 2026
Your questions about bathroom resealing in Selsted
Can you do bathroom resealing in Selsted?
Yes, Selsted is within the area we cover. Our work covers London and the South East. Just ring 0345 464 0079 or drop us an email with a few details of the job.
Do you cover smaller places like Selsted?
Yes, Selsted is covered. We work across London and the South East, from towns to the smallest places. The journey is planned ahead, so it helps to know about access.
Will there be a smell?
Possibly a little. It fades as the sealant cures, and ventilation helps.
Where do you work from?
Our base is in Crawley, West Sussex, and we cover South East England, London and all of Scotland.
How much does bathroom resealing cost in Selsted?
The cost depends on the size of the job, access and how much old sealant has to come out. Call for a quick quote.
Are you insured?
Yes. Full insurance covers our work.
Does someone need to be in?
Access is agreed with you when the job is booked. For inside work, that normally means someone being in.
What should I tell you?
The location, the problem and the rough size of the job. Photos by email help too.
Places near Selsted
What else we do in Selsted
Bathroom resealing around Selsted
Most of the South East has hard water, which leaves limescale on sealant, grout and fittings.
Letting a property close to Shepherds Well station? Then mouldy sealant is one of the first things a new tenant notices, so it’s worth renewing between lets. Schools such as Selsted Church of England Primary School are buildings too, and we reseal washrooms and kitchens in schools and businesses as well as homes.
Selsted is about 5 miles north of Folkestone, in Kent. If you need bathroom resealing in Selsted, please ring 0345 464 0079 or send us an email for a quick quote. We are based in Crawley and cover Kent. Selsted is one of 922 places in Kent we cover for bathroom resealing. Chelmsford is on our list too, about 50 miles from Selsted.
We cover every part of CT15 for bathroom resealing and the streets around it. Close by, we work in Swingfield Minnis (1 mile south), Wootton (1 mile north), Denton (2 miles north), Lodge Lees (2 miles north) and Shelvin (2 miles north). Larger places within reach include Ashford (13 miles west), Canterbury (9 miles north-west), Dover (6 miles east), Folkestone (5 miles south), Whitstable (15 miles north-west) and Deal (10 miles north-east).
Landmarks near Selsted
Selsted’s nearest station is Shepherds Well station, about 3.2 miles north-east of the centre. Nearby you’ll also find Royal Victoria Hospital (5 miles south) and Folkestone Castle (4.2 miles south). The countryside around Selsted includes Cheriton Hill.
What sealant work can’t fix
To be straight with you, some problems need a different trade:
- A leaking waste, trap or valve
- Cracks in the tray itself rather than the joint
- Movement from a bath with loose feet or no proper support
If you are not sure, just ring 0345 464 0079 or drop us an email and we’ll give you a straight answer before booking.
What we seal
- Kitchen worktops & upstands
- Baths
- Basins & vanity units
- Wet rooms
- Shower trays & enclosures
- Sinks & splashbacks
How to look after the new joints
Joint life depends on how it’s used and looked after. We suggest:
- Keep bottles off the sealant line
- Clean with a mild bathroom cleaner and a soft cloth
- Keep the fan on for a while after bathing
- Wait for the cure time we give you
In a kitchen, don’t let water sit along the back of the worktop and keep hot pans off the bead. The drier the joint stays, the longer it lasts.
Small signs come before a leak: a corner lifting, a gap behind the bead, a dark line under the silicone or a damp patch on the ceiling below. If you spot one, it’s time to reseal.
Landlords, agents and businesses in Selsted
We work for landlords and agents as well as homeowners. Sealant work between tenants is a simple way to keep a property in good order before the next move-in.
Water getting past a failed joint can damage the building, which is a bigger problem in a rented property. Keeping joints in good order is simple maintenance that we can handle for you.
DIY versus a professional finish
The difference is mostly in the preparation and the product. We take joints back to clean, dry surfaces, and the sealant is matched to the joint and its conditions, then guaranteed for a year.
Not every job suits DIY: high-level joints, fire-rated gaps, external movement joints and big jobs need the right product, the right access and the right method.
What happens on the day
There is not much for you to do on the day. Show us the job and we’ll take it from there. The job generally takes around two hours for one bath or shower, longer for a whole bathroom. Somewhere like Selsted needs a little journey planning: let us know about lanes, gates and parking. Everything for the job comes with us, so a second trip is avoided where possible.
- We start by protecting the area and stripping out the old bead.
- We clean and degrease the joint and treat any mould.
- The joint is left to dry, and baths are filled with water first.
- A single bead of anti-fungal sanitary silicone is applied and tooled smooth.
- We clear away and tell you when it can get wet, usually after around 24 hours.
Before we arrive
- Try not to wet indoor joints just before the visit
- Mention any sign-in or site rules at work premises
- Mention any tricky access
Getting a quote
For a quick quote, get us on the phone, or send an email if you’d rather. Tell us about the joints that need doing and we will explain what’s involved before giving you a price.
Read more
Why deal with it now?
Leaving a split or mouldy bead only stores up trouble. Once water is behind the bath, it can reach floorboards, panels and the ceiling underneath, turning a small job into a building repair. Older cottages and farmhouses around Selsted can have timber floors and frames, where water from a failed joint can cause rot if it’s left.
Leaving a failed joint normally makes the job bigger, not smaller, because water and mould keep working on it. If you’re not sure whether it needs doing, phone 0345 464 0079 or email us and we will give you an honest view and a quote.
Why choose Mr Mastic in Selsted
- White, clear, grey or coloured to suit, where the product allows
- Sealant colour chosen to suit
- Every job guaranteed for a year
- Anti-fungal silicone where joints get wet
Take a look at what affects the cost and customer reviews.