Moray · Scotland
Bathroom & kitchen resealing in Rothes, Moray
Bath, shower, basin, wet room, worktop and sink resealing for Rothes, backed by a 12-month guarantee. Ask us for a quote.
- Black mould in the silicone that will not clean off
- A joint torn by a bath that flexes
- Shrunken sealant along the back of a worktop
Bathroom resealing in Rothes, done properly
Homes in Rothes have the same weak spots as anywhere else: bath edges, tray joints, basin backs and kitchen upstands. Every joint is cut out, cleaned and left dry before it’s resealed. Common call-outs are for water escaping at the shower enclosure and damp behind the bath or under the tray, on sinks & splashbacks, basins & vanity units and baths.
Being further from a city does not change the work: everything old is cut out, the joints are cleaned and dried, and new sealant or grout goes in. The journey and access are simply planned in advance.
We guarantee the work for a year. If something isn’t right with it in that time, tell us and we’ll put it right.
- Place
- Rothes (AB38)
- Wider area
- Moray
- Guarantee
- 12 months on all our work
- Quotes
- Quoted before any work starts
- info@mrmastic.co.uk
- Last updated
- 26 October 2026
Rothes homes and their sealant
Private landlords in Scotland must be registered and meet the Repairing Standard, which covers keeping fixtures and fittings in a reasonable state of repair. Tired, leaking sealant is worth putting right before a new tenant moves in. Rothes has hotels and guest accommodation nearby. Hotel bathrooms are part of our work as well as homes, and can be done room by room.
Around Rothes, as everywhere, bathroom resealing is only as good as the preparation behind it.
Rothes is about 9 miles south-east of Elgin, in Moray. From the centre of Rothes to the outskirts, we cover bathroom resealing for every kind of property. Rothes is one of 58 places in Moray we cover for bathroom resealing. We also work in Aberdeen, about 48 miles from Rothes.
Every address in AB38 is within our area for bathroom resealing. Bathroom resealing is available to properties on Seafield Square, High Street and New Street. With the A941 and B9015 close by, Rothes is simple for us to get to for bathroom resealing. Close by, we work in Craigellachie (3 miles south), Aberlour (4 miles south), Charlestown of Aberlour (4 miles south), Fogwatt (5 miles north-west) and Blackhills (6 miles north). Further out, we also cover Elgin (9 miles north-west), Buckie (13 miles north-east), Lossiemouth (13 miles north), Keith (9 miles east), Ashgrove (8 miles north-west) and Fochabers (7 miles north-east). Remote and island addresses need a little more planning, so please mention your location when you drop us a line at info@mrmastic.co.uk.
Landmarks near Rothes
Well-known places in the area include Fleming Cottage Hospital (4.1 miles south) and Ladycroft Agricultural Museum (3.5 miles south-west). Open spaces near Rothes include Ben Aigan.
What happens if it’s left?
A quick bead over the top of the old one might look better for a while, but it can’t stick to what’s underneath. Water creeps under it and mould follows. Exposed walls in smaller Scottish places take a lot of wind and rain, and damp in stone or harled walls takes a long time to dry once water gets behind a joint.
A failed joint rarely gets cheaper to fix by waiting, as water and mould keep getting in. If you’re unsure, drop us a line at info@mrmastic.co.uk for an honest opinion and a quote.
What you get with us
- Tidy, careful work
- An ARBOMaster approved applicator
- A choice of colours where the product allows
- We never seal over old sealant
Take a look at what affects the cost and what customers say.
Do you need bathroom resealing in Rothes?
Sealing over old silicone is one of the commonest mistakes we find. New silicone won’t bond to old silicone, so it peels, leaks and hides mould behind it.
People normally contact us when they notice one of these:
- Lumpy, uneven sealant from a DIY attempt
- Splits where the tray meets the wall
- Two layers of silicone, both failing
- Mouldy sealant that has gone black
In the older streets around Rothes Kirk, older homes can move a little, which is hard on rigid grout and tired sealant.
Questions to ask before booking
- Who turns up on the day
- How the colour is chosen
- The length of the guarantee
- What the quote includes, VAT included or not
Can I do it myself?
Overfilling a joint is a classic DIY mistake. A heavy bead looks messy and copes badly with movement, and the joint depth matters as much as the finish.
The difference is mostly in the preparation and the product. Joints are cleaned back to sound surfaces and dried, and the sealant is matched to the joint and its conditions, then guaranteed for a year.
Towns and villages near Rothes
Other services in Rothes
What we do, step by step
There’s no need to move everything out, only the area right around the joints. We protect the rest, and the work takes two to three hours for a typical bath, depending on how much old sealant there is for a typical job. For a place like Rothes, longer drives are planned in advance. Tell us about tracks, gates, a ferry crossing or anything unusual about getting there.
- First the area is protected and every bit of old sealant removed, including the film left on the tiles.
- We clean and degrease the joint and treat any mould.
- The joint is left to dry, and baths are filled with water first.
- We apply anti-fungal sanitary silicone in one even bead and tool it neatly.
- We clear away and tell you when it can get wet, normally after around 24 hours.
Getting ready for the visit
- Tell us about any previous sealing or DIY attempts
- Try not to wet indoor joints just before the visit
- Let us know if you’ve seen damp or leaks
Get a quote
Call for a quick quote, or email us if that is easier. Describe what needs sealing and we will explain what’s involved.
Advice
Rothes: your questions answered
Do you cover Rothes for bathroom resealing?
Yes. We work across all of Scotland, and Rothes is part of that. Just send an email to info@mrmastic.co.uk with a few details of the job.
Do you work in hotels near Rothes?
Yes, we work for hotels as well as homes and businesses. Rooms can be done a few at a time, so the building stays open.
Where is Mr Mastic based?
Our base is in Crawley, West Sussex, and we work across South East England, London and Scotland.
Is it OK to put new sealant on top of the old bead?
No, and it’s one of the main reasons reseals fail. We cut out all of the old sealant, clean the joint and start again.
Can tenants book the work?
We can work for tenants, landlords or agents. Just make sure your landlord agrees.
Will it make a mess?
Tidy work is part of the job. Nearby surfaces are protected.
How much does bathroom resealing cost in Rothes?
The cost depends on the size of the job, access and how much old sealant has to come out. Call for a quick quote.
When can I use the bath or shower again?
We give you the cure time before we leave, and it’s normally around 24 hours. Getting it wet too early can spoil the new joint.
How we quote for bathroom resealing
Every job gets its own quote. This is what makes a difference:
- The number of rooms or windows
- Whether the work is at height
- Whether there’s mould to deal with
- The size of the job
Combining jobs into one visit generally makes better use of the time than several visits. We’ll send you a clear quote for the lot.
Helping us quote
A few details help us give you an accurate quote. When you ask for a quote, tell us:
- The rough size of the job
- Any access issues, like height or stairs
- Whether it has been sealed before
- What the problem is, such as mould, gaps, leaks or cracking
For bathroom resealing in Rothes, drop us a line at info@mrmastic.co.uk. A short description of the job and where it is helps us quote, and we will agree the price before any work begins.
How the job changes by surface
Sinks & splashbacks
Next to the sink, the sealant has to cope with constant water, and a food-safe product where it’s needed. The bead is finished smooth so it wipes clean.
Shower trays & enclosures
There are usually two jobs in a shower: the tray-to-wall joint and the enclosure joints. Both get soaked every time the shower runs, so each is cut out and renewed with anti-fungal sanitary silicone.
What sealant work can’t fix
Sealant isn’t the answer to every problem, and we’d rather say so up front. It will not solve:
- A tray that rocks until it’s re-bedded
- A tray or bath that’s cracked through
- Water getting in through the grout rather than the sealant
Not sure which it is? You can email us at info@mrmastic.co.uk and we will tell you honestly.
Joints and surfaces we work on
- Basins & vanity units
- Kitchen worktops & upstands
- Sinks & splashbacks
- Baths
- Shower trays & enclosures
- Wet rooms