Moray · Scotland
Bathroom & kitchen resealing in Portknockie, Moray
Specialist bathroom resealing for Portknockie: the right sealant, proper preparation and a neat finish. Ask us for a quick quote.
- A reseal done over the top of the old bead
- Black mould in the silicone that will not clean off
- Lumpy, uneven sealant from a DIY attempt
How we handle bathroom resealing in Portknockie
Sealant that’s mouldy, cracked or peeling is worth sorting before it lets water through. Just drop us a line at info@mrmastic.co.uk with a photo of the joints, and you’ll get a clear quote before any work starts. We are often asked to deal with smears of silicone across the tiles and a joint torn by a bath that flexes, on wet rooms, shower trays & enclosures and kitchen worktops & upstands.
Being further from a city does not change the work: old material out, joints cleaned and dried, and a fresh, even finish. The journey and access are simply planned in advance.
A one-year guarantee comes as standard, so you are not left on your own once the job is done.
- Location
- Portknockie (AB56)
- Wider area
- Moray
- Cover
- One year on every job
- Quote
- Quoted before any work starts
- info@mrmastic.co.uk
- Page updated
- 26 October 2026
For landlords and businesses
Hotels need rooms back in use, so we plan the work room by room around your bookings where we can. We’ve worked in hotels as well as homes and businesses.
We work for landlords and letting agents as well as householders. Sealant work between tenants is a simple way to keep a property in good order before the next move-in.
More services for Portknockie
The process
Our applicators work methodically: protect, prepare, seal, tidy. For most jobs that takes a morning or an afternoon for most single baths and showers and we leave things clean and tidy. Somewhere like Portknockie may be a longer drive, and the journey is planned ahead. Mention tracks, gates, ferries or anything else about the route.
- First, each joint is checked for movement and signs of water.
- The old silicone is cut out completely, along with the film it leaves on the tiles.
- Joints are degreased and any mould is treated.
- When the joint is dry, and a bath has been filled with water, the new silicone goes on.
- We tool the bead to a neat finish and give you the cure time, usually around 24 hours.
How to prepare
- Keep children and pets away from the work area
- Mention any parking rules near the property
- Mention if the joints have been sealed before
Ask for a quote
There’s no standard price list, as no two jobs are quite the same. Instead, your job gets its own clear quote. To arrange one, send an email to info@mrmastic.co.uk.
Related advice
What the job involves on each surface
Kitchen worktops & upstands
Kitchen joints need more degreasing than bathroom ones, since cooking leaves a film that stops silicone sticking. Proper degreasing is what helps the new joint last.
Sinks & splashbacks
Splashbacks in glass, tile or acrylic meet the worktop in a long joint. We renew it in clear, white or a matched colour.
Quotes for bathroom resealing in Portknockie
Your quote is based on your job. We take into account:
- How many areas need sealing
- When we can work, for business premises
- Mould in or behind the old joints
- The number and length of the joints
Doing several joints on one visit is usually more efficient than separate visits, so tell us about everything that needs sealing. We will send you a clear quote for the lot.
What we need to know
Before you ask for a quote, have a think about:
- If it’s domestic, commercial or a hotel
- Where the job is, and your postcode
- Access, such as stairs, a lift or height
- Roughly how big the job is
Want a quote for bathroom resealing? Please drop us a line at info@mrmastic.co.uk and tell us about the job. We will explain what we’d do and give you a clear quote before any work starts.
Do you need bathroom resealing in Portknockie?
Sealing over old silicone is one of the commonest mistakes we find. Fresh silicone cannot grip the old bead underneath, so it peels, leaks and hides mould behind it.
Any of these means the joints need attention:
- Water getting behind the bath panel
- Cracked, shrunken or lifting silicone
- Gaps where the bath or tray has moved
- Gaps between the worktop and the wall
Around Portknockie, as everywhere, bathroom resealing is only as good as the preparation behind it.
What to look for in a quote
- What the quote includes, VAT included or not
- Which colour the sealant will be
- How the surfaces are prepared before sealing
- What guarantee comes with the work
What bathroom resealing looks like in Portknockie
Portknockie is within about 1 mile of the coast. Near the coast, holiday lets and guest houses can see bathrooms used by one guest after another, and sealant and grout that work that hard wear out sooner. In Scotland, private landlords have to meet the Repairing Standard, which includes keeping fixtures and fittings in reasonable repair. Tired, leaking sealant is worth putting right before a new tenant moves in.
For an older house near a landmark such as Church Of Scotland, timber floors under older bathrooms flex, so joints need a sealant that moves with them.
Portknockie is about 4 miles north-east of Buckie, in Moray. If you need bathroom resealing in Portknockie, please email us at info@mrmastic.co.uk for a quick quote. We are based in Crawley and cover Moray. Our Moray coverage runs to 58 places, Portknockie among them. There’s also a page for Aberdeen, roughly 47 miles from Portknockie.
Our applicators cover all of AB56 for bathroom resealing. Local streets include High Street, Station Road and Victoria Place. You will find Portknockie on the B9021, so it’s easy for us to get to. If you’re just outside Portknockie, we cover Buckpool (2 miles west), Findochty (2 miles west), Cullen (2 miles south-east), Lintmill (3 miles south-east) and Portessie (3 miles west). Further out, we also cover Buckie (4 miles south-west), Keith (12 miles south), Fochabers (11 miles south-west), Ianstown (4 miles south-west) and Lhanbryde (14 miles west). Portknockie is among the bigger towns we cover in Moray. If you are somewhere remote, a little more planning is needed.
Local landmarks in Portknockie
Nearby you’ll also find Findochty Castle (2.2 miles west) and Seafield Hospital (5.1 miles south-west).
When something else is needed
New sealant can’t fix everything, and we’d rather say so up front. Sealant won’t put right:
- Failed grout lines across the wall
- Tiles that have come away from the wall
- A bath or tray that moves because it is not properly supported
Not sure which it is? You can send an email to info@mrmastic.co.uk and we’ll tell you honestly.
Surfaces we seal
- Wet rooms
- Baths
- Sinks & splashbacks
- Shower trays & enclosures
- Kitchen worktops & upstands
- Basins & vanity units
Common questions in Portknockie
Is Portknockie in your area for bathroom resealing?
Yes, Portknockie is within the area we cover. We work across all of Scotland. You can drop us a line at info@mrmastic.co.uk and tell us what needs doing, and we’ll send you a clear quote.
Is Portknockie within the area you cover?
Yes. Portknockie is within the area we cover, which takes in towns, villages and rural addresses. Our work covers the whole of Scotland. Let us know about access, parking and anything unusual about getting there when you book.
Does someone need to be in?
For indoor joints, yes, someone needs to let us in. Once we’ve agreed the job, you do not need to watch us work.
Is it worth trying it myself?
Some simple jobs can be done by a careful DIYer. The usual mistakes are sealing over old sealant, sealing a damp joint and using too much.
Do you work for landlords and businesses?
Yes. As well as householders, we work for landlords, agents, businesses and hotels.
Will there be a smell?
There can be a smell while the sealant cures, which fades as it sets. Opening a window helps.
Do you do commercial work?
Yes. We work in offices, washrooms, hotels and other commercial premises, as well as homes. Working times can be discussed when we quote.
Will you leave a mess?
No. We protect the surfaces around the joints, and we tidy up before we go.
Keeping the joints in good condition
Looking after new joints is easy, and it makes a real difference:
- Dry the bead with a towel now and then
- Do not leave water standing on kitchen joints
- Do not let bottles sit on the bead
- Wait for the cure time we give you
Good ventilation does more than any cleaner. Run the extractor fan during and after a shower, so the silicone gets a chance to dry.
Mould that starts as a few spots spreads through the bead. When it has grown right through, it rarely cleans out, and nearby grout often goes the same way. Catching it early keeps it a simple reseal.