Surrey · England
Bathroom & kitchen resealing in Pitch Place, Surrey
Specialist bathroom resealing for Pitch Place: careful preparation, the right product and tidy work. Call for a quick quote.
- Lumpy, uneven sealant from a DIY attempt
- A bead that has pulled away from the tiles
- Leaks into the floor or ceiling below
About our bathroom resealing in Pitch Place
Sealant is the soft line between a bath, shower or worktop and the wall. Once it cracks or goes mouldy, water starts to find its way through into walls, panels and floors. Our team cut the old bead out completely and lay a new one in anti-fungal sanitary silicone. We work on wet rooms, sinks & splashbacks and shower trays & enclosures, and the jobs we see most are a bead that has pulled away from the tiles and black mould in the silicone that won’t clean off.
Homes around Pitch Place are mostly houses and cottages rather than flats. Sealant and grout wear out here just as they do anywhere: everything old comes out before the new sealant or grout goes in.
Your job is guaranteed for a year, as with all our work.
- Location
- Pitch Place (GU8)
- Wider area
- Surrey
- Cover
- 12 months on all our work
- Quotes
- Quoted before any work starts
- Call
- 0345 464 0079
- Updated
- 26 October 2026
Your questions about bathroom resealing in Pitch Place
Do you cover Pitch Place for bathroom resealing?
Yes. Our work covers London and the South East, and Pitch Place is part of that. Just call 0345 464 0079 or drop us an email with a few details of the job.
Do you work for landlords with property near Witley station?
Yes, landlords and agents are among the people we work for. You can ring 0345 464 0079 or send us an email with the details for a clear quote.
How long does a bath or shower reseal take?
A single bath or shower takes about a couple of hours, old sealant removal included. A whole bathroom plus the kitchen may take most of the day.
What does bathroom resealing cost?
Every job is different, so each one gets its own quote. For a quick quote, ring 0345 464 0079 or send us an email and tell us what needs doing and where.
Can new silicone go straight over the old?
No, and it’s one of the main reasons reseals fail. The old joint is stripped, cleaned and resealed from scratch.
Can you get rid of the black mould in my sealant?
Yes, we can. The old sealant comes out, the mould is treated, and we reseal with anti-fungal sanitary silicone.
Where do you work from?
Mr Mastic is based in Crawley. Our applicators cover Pitch Place, along with the rest of our area.
Do you hold any approvals?
Yes. We’re an ARBOMaster approved applicator, which is run for the Arbo sealant brand.
Keeping the joints in good condition
No joint lasts for ever, but care makes a real difference. Our tips:
- Avoid abrasive pads on the sealant
- Squeegee the walls and tray after use
- Let new sealant cure fully before it gets wet
- Clean with a mild bathroom cleaner and a soft cloth
Have a look at the joints every few months. A small split or a corner lifting is easy to spot, and if anything looks wrong, just phone 0345 464 0079 or drop us an email.
Mould that starts as a few spots spreads through the bead. Once it’s deep in the silicone, cleaning usually will not remove it. Replacing the sealant early keeps the job small.
How the job changes by surface
Sinks & splashbacks
Around the sink, we use a product suited to kitchens, and a food-safe product where it’s needed. The bead is finished smooth so it wipes clean.
Shower trays & enclosures
Shower trays are sealed to the wall, and enclosures are sealed to the tray and tiles. Both take water every day, so each is cut out and renewed with anti-fungal sanitary silicone.
What bathroom resealing looks like in Pitch Place
Hard water is the norm across most of the South East, which leaves limescale on sealant, grout and fittings.
Homes close to Church of St Michael and All Angels include some older properties, and walls and floors in older homes can move, and sealant and grout show it first.
Pitch Place is about 5 miles south-east of Farnham, in Surrey. Homes, rented property, offices and hotels in Pitch Place is covered for bathroom resealing, old or new, large or small. The work is guaranteed for a year. Across Surrey, we cover 395 places, Pitch Place among them. We also work in Crawley, about 23 miles from Pitch Place.
Every address in GU8 is covered for bathroom resealing, from the main roads to the quietest streets. We also cover the places around Pitch Place: Thursley (1 mile east), Rushmoor (1 mile north-west), Green Cross (2 miles south-west), Beacon Hill (2 miles south-west) and Tilford Common (2 miles north-west). Larger places within reach include Guildford (10 miles north-east), Woking (13 miles north-east), Camberley (13 miles north), Farnham (5 miles north-west), Frimley (11 miles north) and Haslemere (4 miles south).
Landmarks near Pitch Place
Locally, jobs take us to homes and businesses close to Three Horseshoes pub and The Flashes. The nearest railway station is Witley station, roughly 3.6 miles east of the centre. Other landmarks nearby include Haslemere and District Hospital (3.9 miles south). Green spaces nearby include Gibbet Hill and Farnham Heath.
DIY versus a professional finish
The difference is mostly in the preparation and the product. We take joints back to clean, dry surfaces, and the sealant is chosen for how the joint moves and where it is, then guaranteed for a year.
The biggest DIY mistake is sealing over old sealant. New silicone will not bond to old, so it peels away and traps moisture behind it. All the old material has to come out first.
What we do, step by step
We keep the work tidy and contained to the area we’re working on, so you can carry on as normal. The job normally takes two to three hours for a typical bath, depending on how much old sealant there is, and we tell you how long to leave it before we go. For a village or hamlet like Pitch Place, the journey is planned in advance: let us know about lanes, gates and parking. We bring what the job needs, so it can be finished in one trip where possible.
- Protection goes down around the bath, shower or worktop.
- Old sealant is sliced away and the residue removed.
- Mould is treated, then the joint is left to dry thoroughly.
- Baths are filled first, then anti-fungal sanitary silicone is applied in a colour to suit.
- The joint is finished neatly and we explain when it can get wet.
How to prepare
- Clear items away from the joints we’re working on
- Try not to wet indoor joints just before the visit
- Tell us about any previous sealing or DIY attempts
Ask for a quote
For a quick quote, get us on the phone, or email us if that’s easier. Tell us about the joints that need doing and we’ll talk you through the work before giving you a price.
Read more
What affects the quote in Pitch Place
The quote reflects the job in front of us. We look at:
- The amount of work
- The product the joint needs
- Whether there’s mould to deal with
- The number of rooms or windows
Some things make a job bigger or smaller: how much old sealant there is and how stubborn it is, any mould to treat, and whether we need extra access for height. Your quote takes all of that into account.
What we need to know
What to tell us when you ask for a quote:
- Any access issues, like height or stairs
- Where the property is
- How many joints, rooms or windows are involved
- Whether it’s a home or a business
Getting a quote is simple: let us know the job and the location. A few photos by email make the job easier to understand, and we will come back to you with a quote.
When to call us in Pitch Place
Sealant laid on a damp, dusty or greasy joint never bonds properly. Traces of soap, bath oil and old sealant stop it gripping, and a joint that looked fine soon begins to come away.
The problems people normally mention when they call are:
- Water getting behind the bath panel
- Black mould in the silicone that will not clean off
- Splits where the tray meets the wall
- Smears of silicone across the tiles
If you let a flat or house near Witley station, a reseal between tenants is a quick way to make the bathroom and kitchen look cared for.
Before you book anyone
- Whether all the old sealant comes out first
- How long the guarantee is
- How the surfaces are prepared before sealing
- What product goes in the joint
When it is not the sealant
In fairness, there are a few things sealant will not fix:
- A tray that rocks until it’s re-bedded
- Loose or hollow tiles, or failed tanking behind them
- Cracked or missing grout between tiles (that is regrouting)
If in doubt, call 0345 464 0079 or send us an email and we will say what we think before you book.
Surfaces we seal
- Baths
- Kitchen worktops & upstands
- Wet rooms
- Shower trays & enclosures
- Basins & vanity units
- Sinks & splashbacks