Medway · England
Bathroom & kitchen resealing in Park Wood, Medway
Professional bathroom resealing in and around Park Wood, with every bit of old sealant taken out first and a 12-month guarantee.
- Water escaping at the shower enclosure
- Sealant that has split, shrunk or peeled away
- Smears of silicone across the tiles
When something else is needed
Some problems need a builder, plumber or other trade rather than us:
- A leaking waste, trap or valve
- A cracked shower tray or bath (that needs repair or replacement)
- Tiles that have come away from the wall
If in doubt, phone 0345 464 0079 or email us and we’ll say what we think.
Where we work in Park Wood
- Kitchen worktops & upstands
- Shower trays & enclosures
- Sinks & splashbacks
- Wet rooms
- Basins & vanity units
- Baths
Bathroom resealing in Park Wood
A shower joint gets soaked every day. Trays, enclosures, screen profiles and wet room floors all need a flexible, waterproof seal. Each gets a bead of anti-fungal sanitary silicone, tooled smooth so water runs off instead of sitting in a ridge. We work on basins & vanity units, wet rooms and shower trays & enclosures, and the jobs we see most are smears of silicone across the tiles and leaking joints on a shower screen.
Even in a smaller place like Park Wood, bathrooms and kitchens see heavy daily use. Older or newer, every room gets the same approach: old sealant or grout cut out, joints cleaned and dried, and a fresh finish laid.
All of our work is guaranteed for twelve months, and the guarantee is the same wherever you are.
- Location
- Park Wood (ME8, ME9)
- Wider area
- Medway
- Guarantee
- A year, on every job
- Quotes
- Quoted before any work starts
- Call
- 0345 464 0079
- Updated
- 26 October 2026
Bathrooms and kitchens in Park Wood
Most of the South East has hard water, so limescale builds up on sealant, grout and fittings, and it has to be cleaned off before new sealant goes in.
Managing a site like Park Wood Infant School? Then its toilets, changing areas and kitchens need their sealant renewed like any other building’s. If you live in an older home near St Paul's Church, timber floors under older bathrooms flex, so joints need a sealant that moves with them.
Park Wood is about 2 miles south-east of Gillingham, in Medway. For bathroom resealing in and around Park Wood, please call 0345 464 0079 or send us an email for a quick quote. We are based in Crawley and cover Medway, Park Wood included. Park Wood is one of 68 places in Medway where we work. Chelmsford is on our list too, about 27 miles from Park Wood.
Postcode districts we cover here for bathroom resealing: ME8 and ME9. Bathroom resealing is available to properties on Beke Road, Bond Road and Nares Road. Other places close to Park Wood include Wigmore (1 mile north), Kemsley Street (1 mile south-west), Hempstead (1 mile west), Bredhurst (1 mile south-west) and Scragged Oak (2 miles south). Larger places within reach include Chatham (3 miles west), Rochester (5 miles north-west), Strood (6 miles north-west), Luton (3 miles north-west), Hoo St Werburgh (6 miles north) and Chatham Waterfront (4 miles north-west). As one of the bigger places in Medway, Park Wood has homes, rented property and businesses of every kind.
What’s near Park Wood
We work in homes and buildings around Howard School, Foxburrow Wood and Rainham School for Girls and the streets around them. The closest station to Park Wood is Rainham (Kent) station, roughly 1.5 miles north. Other landmarks nearby include Medway Maritime Hospital (3.4 miles north-west). The countryside around Park Wood includes Bishop Saltings and Detling Hill.
How to look after the new joints
A little care helps the new joints last. Our advice:
- Run the extractor fan during and after every shower
- Look for lifting corners and small gaps now and then
- Never pick at the silicone with a blade
- Keep bottles off the sealant line
Mould needs damp, so keep the room aired. Run the extractor fan during and after a shower, so the bead dries out between uses.
Do not wait for a refit to deal with failed sealant. Like paintwork, sealant needs renewing from time to time, and renewing it as soon as it fails protects everything around it.
Questions from Park Wood
I let a flat near Rainham (Kent) station. Can you help?
Yes, landlords and agents are among the people we work for, and several properties can be quoted together. You can call 0345 464 0079 or send us an email with the details for a clear quote.
Will you come out to Park Wood?
Yes, we do. We work across London and the South East, and smaller places are part of that. Longer journeys are simply planned in advance.
Will it make a mess?
Very little: the area around the joints is protected first, and we tidy up before we go.
My sealant has gone black. Can you sort it?
Yes, we replace the mouldy bead. Cleaning products may lighten it, but the lasting fix is new anti-fungal silicone on a clean, treated joint. Airing the room well helps stop it returning.
What do you put in the joint?
Quality sealants from brands including Arbo and Everbuild, picked for each joint. We will tell you what we’re using and why.
Do you remove the old sealant?
Yes. All of the old material is cut out and the joint cleaned before resealing.
Do the sealants smell?
It depends on the product. Some smell for a while, some hardly at all, and any smell fades as they cure.
Should I try DIY first?
Sometimes. Preparation is everything: all the old sealant out, and a clean, dry joint. If it doesn’t work out, we can redo it.
What happens on the day
Most of a good job is in the preparation, so that’s where we spend the time. Every joint is cleaned and dried before new material goes in. In total, it generally takes half a day or less for one room, longer when the kitchen is included. In a smaller place like Park Wood, parking is seldom the issue; lanes, gates and long drives are worth mentioning. If the job is outside, tell us about side access and how high the joints are.
- Protection goes down around the bath, shower or worktop.
- We cut away the old sealant and clean off what’s left.
- We treat any mould and let the joint dry properly.
- Any bath is filled with water, then we lay a bead of anti-fungal silicone in white, clear or a matching colour.
- The joint is finished neatly and we explain when it can get wet.
Before we arrive
- Let us know if you’ve seen damp or leaks
- Mention any sign-in or site rules at work premises
- Move anything stored near the joints
How to get a quote
Quotes start with a quick conversation. Tell us what’s wrong, where it is and how much there is, and we will talk you through what we’d do. When it suits you, call 0345 464 0079 or email us.
Read more
What happens if it’s left?
The difference in a professional reseal is mostly what you do not see: removing all the old sealant, degreasing the joint, treating mould and drying it properly. Without that preparation, the new bead will not last. Homes in smaller places like Park Wood can face more weather, and failed outside joints let damp into walls. Inside, a split seal lets water into floors and panels just as it would anywhere.
There are no prices on our website, because the cost depends so much on the job itself. Call for a quick quote and we’ll talk you through it.
Why choose Mr Mastic in Park Wood
- Over 20 years’ experience
- 4.9 on Google from 180+ five-star reviews
- Colour picked to suit the job
- We never seal over old sealant
Read what affects the cost and customer reviews.
Landlord and commercial work in Park Wood
Businesses can book us for washrooms, kitchens, offices and more. For commercial premises, we can talk through working times when we quote.
Letting agents often deal with us directly. Send the address, what’s needed and the access arrangements and we’ll quote.
Towns and villages near Park Wood
Also in Park Wood
What affects the cost of bathroom resealing
Some jobs are bigger than they look, and some smaller. The main factors:
- The amount of work
- The number of rooms or windows
- Whether old sealant or filler has to be cut out
- The product the joint needs
Homes and businesses are quoted the same way: the amount of work, the access and the products needed, plus any working-time requirements on site. Ask us for a quote and we’ll explain what it covers.
What we need to know
What to tell us when you ask for a quote:
- A few pictures by email, if you can
- Access, such as stairs, a lift or height
- The type of property
- Where the property is
Getting a quote is simple: let us know what needs doing and where, and roughly how big it is. Photos by email help us understand the job, and we will take it from there.
What we’re called out for in Park Wood
Baths and trays move. Acrylic in particular gives slightly under the weight of water and a person, and a tray that is not fully bedded can rock. Over time the joint tears or pulls away from the tile.
Signs it’s time to call us include:
- Cracked, shrunken or lifting silicone
- Black spots spreading through the bead
- Lumpy, uneven sealant from a DIY attempt
- Water escaping at the shower enclosure
Rented homes near Rainham (Kent) station change hands often, and mouldy sealant is one of the first things a new tenant notices, so it’s worth renewing between lets.
Comparing quotes
- When the joint can take water or movement
- How the colour is chosen
- Whether they seal over old material or remove it
- How the joint is cleaned and prepared